兰州—天水地区三维重力反演及其地质解释

本文利用重力资料对兰州—天水地区的深部构造进行了研究。在计算中,采用Parker-Oldenbarg三维位场反演方法,反演前对重力资料进行了地形改正和中新生代沉积层校正。根据反演结果,综合分析了有关资料,认为该区为青藏块体过渡带,并且提出了陇中盆地为断块型构造盆地的新认识。     

Arch responses to correlated multiple excitations

This paper analyses the in-plane stochastic responses of incompressible circular arches to spatially correlated multiple excitations. The dynamic, quasi-static and total structural displacements, moments, shear and axial forces are calculated. The results are compared with those obtained by various simplified excitations. The effects of the ground motion spatial variations on arch responses are examined. The results indicate that the responses may be underestimated or overestimated by neglecting the ground motion spatial variations, depending upon the structure and ground motion properties, the locations where the responses are evaluated, and the response quantity under consideration.     

云南地区地震短临预报实践

１９９７年４－６月云南省地震局对滇西南重点监视区做了短临预报,但这期间未发生所预期的地震。而滇西南地区６级地震的背景和省内的前兆异常变化是明显的。为此,认为前兆异常是区域应力场增强的结果。异常与地震是相互伴生的兄弟关系,不是父子间因果关系,是造成地震虚报的主要原因。     

Large-sample hydrology: recent progress,guidelines for new datasets and grand challenges

ABSTRACT

Large-sample hydrology (LSH) relies on data from large sets (tens to thousands) of catchments to go beyond individual case studies and derive robust conclusions on hydrological processes and models. Numerous LSH datasets have recently been released, covering a wide range of regions and relying on increasingly diverse data sources to characterize catchment behaviour. These datasets offer novel opportunities, yet they are also limited by their lack of comparability, uncertainty estimates and characterization of human impacts. This article (i) underscores the key role of LSH datasets in hydrological studies, (ii) provides a review of currently available LSH datasets, (iii) highlights current limitations of LSH datasets and (iv) proposes guidelines and coordinated actions to overcome these limitations. These guidelines and actions aim to standardize and automatize the creation of LSH datasets worldwide, and to enhance the reproducibility and comparability of hydrological studies.     

硅基毫米波收发前端集成电路研究进展

随着第五代移动通信技术（5G）逐步向毫米波频段（FR2）部署，以及目前无人驾驶技术对毫米波雷达技术的需求，高性能的毫米波收发前端集成电路成为了目前研究的热点.与此同时，硅基器件工艺的快速发展，极大地提高了晶体管的截止频率，为低成本、高性能的硅基毫米波集成电路设计提供了基础.本文对近年来的毫米波通信和雷达的硅基收发前端集成电路的研究现状和发展趋势进行了综述.     

Estimation of PM_(2.5) Mass Concentration from Visibility

Aerosols in the atmosphere not only degrade visibility, but are also detrimental to human health and transportation. In order to develop a method to estimate PM_(2.5) mass concentration from the widely measured visibility, a field campaign was conducted in Southwest China in January 2019. Visibility, ambient relative humidity(RH), PM_(2.5) mass concentrations and scattering coefficients of dry particles were measured. During the campaign, two pollution episodes, i.e., from 4-9 January and from 10-16 January, were encountered. Each of the two episodes could be divided into two periods. High aerosol hygroscopicity was found during the first period, when RH was higher than 80% at most of the time, and sometimes even approached 100%. The second period experienced a relatively dry but more polluted condition and aerosol hygroscopicity was lower than that during the first period. An empirical relationship between PM_(2.5) mass concentration and visibility(ambient aerosol extinction) under different RH conditions could thus be established. Based on the empirical relationship,PM_(2.5) mass concentration could be well estimated from visibility and RH. This method will be useful for remote sensing of PM_(2.5) mass concentration.     

Latitudinal characteristics of the geomagnetic field during the storm of 15–16 July 2000

In this paper geomagnetic disturbances at middle and low latitudes are discussed by using geomagnetic data of the magnetic storm of 15–16 July 2000. This storm is a response to the solar Bastille Day flare on 14 July. Generally, the geomagnetic disturbances at middle and low latitudes during a storm are mainly caused by three magnetospheric–ionospheric current systems, such as the ring current system (RC), the partial ring current and its associated region II field-aligned currents (PR), and the region I field-aligned currents (FA). Our results show that: (1) The northward turning of IMF-Bz started the sudden commencement of the storm, and its southward turning caused the main phase of the storm. (2) The PR- and FA-currents varied violently in the main phase. In general, the field of the FA-current was stronger than that of the PR-current. (3) In the first stage of the recovery phase, the RC-field gradually turned anti-parallel to the geomagnetic axis from a 15° deviation, and the local time (Λ) pointed by the RC-field stayed at 16:00. After that, Λ rotated with the stations, and the RC-field was not anti-parallel to the geomagnetic axis, but 5°–10° deviated. These facts suggest that the warped tailward part of the ring current decays faster than the symmetric ring current.     

Horizontal and vertical distribution of PCBs and chlorinated pesticides in sediments from Masan Bay,Korea

Horizontal and vertical distributions of organochlorine compounds (OCs) were determined in sediments from Masan Bay. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethanes (DDTs), HCB, hexachlorocyclohexanes (HCHs) and chlordane related compounds (CHLs) in sediments were in the range of 1.24-41.4, 0.28-89.2, 0.02-0.59, nd-1.03, and nd-2.56 ng/g, respectively. The spatial distribution of OCs showed a negative gradient from the inner of the bay to outer part of the bay, indicating that the source of OCs was probably located inside the bay. Compositional pattern of PCB congeners showed a relatively high concentration of high-chlorinated congeners in the inner part of the bay and a relatively low concentration of low-chlorinated congeners in the outer part. In sediment core from Masan Bay maximum concentrations of PCBs and DDTs are observed in the subsurface samples and correspond to an age of early 1980s and late 1960s. The concentration profiles of PCBs and DDTs in sediments of Masan Bay appear to correspond to use of PCBs and DDTs in Korea.     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338     

Investigation of solid waste soil as road construction material

The geotechnical properties of solid waste soils for use as sub-base materials in road construction were investigated. A series of field tests and laboratory tests were performed to assess the physical and mechanical properties of the solid waste soils sampled from a landfill site, near to a riverside, which had been reclaimed over the last two decades. The tests showed that geotechnical properties are clearly affected by the magnitude of organic matter content. As the organic matter content increases, the maximum dry unit weight, the shear strength and bearing capacity of ground decrease, while the void ratio and compressibility increase. If the organic matter content is more than about 8% in solid waste soils, it is not suitable for use as a sub-base material in road construction due to the significant decrease of shear strength and bearing capacity.