Podiform chromitite formation in a low-Cr/high-Al system: An example from the Southwest Indian Ridge (SWIR)

Recent reassessment of abyssal peridotites obtained during the dredging of the oblique supersegment and the easternmost subsection of the Southwest Indian Ridge by the R/V Knorr Cruise 162 and the R/V Yokosuka YK98-07 revealed the occurrence of dunites containing podiform chromitites and dunites with variable chromite concentration closely associated with lherzolite and harzburgite. The size of the chromitite pods varies from a few mm to 2 cm in width. Chromites in the podifom chromitites have very low Cr# (=0.22–0.23) and low TiO₂ (<0.17 wt%). They are almost free of silicate inclusions except for a few euhedral sulfide grains which occur far from cracks and lamellae and are considered primary in origin. The lherzolite which possibly represents the wallrock hosting the dunites with podiform chromitites also show low spinel Cr#(=0.16) and low Cr# in the clinopyroxenes (=0.09–0.10) and orthopyroxenes (=0.07–0.09). The small size of the SWIR podiform chromitites is strongly controlled by the low Cr/Al available in the wallrock and the invading melt. The presence of sulfide inclusions and the absence of PGEs further attest to the low Cr/Al (i.e. low refractoriness) in the system involved in the genesis of the SWIR podiform chromitites. Lastly, the discovery of podiform chromitites in the SWIR implies that the formation of podiform chromitite at mid-oceanic ridges, regardless of its spreading rate, is highly possible.     

Hydrothermal Precipitation of Chromites

<正>Chromite is a typical refractory igneous mineral,precipitated from mafic magmas at relatively high temperatures.Chromites commonly occur in sedimentary,metamorphic and metasomatic rocks,where they are interpreted as relics of an igneous phase and serve as the source of Cr for low-temperature Cr-bearing minerals.We     

Excitation of non-spherical waves in solar atmosphere in the presence of toroidal magnetic field

It has been shown that non-spherical waves could be excited in rotating stellar convective envelopes. In this paper, the manner of excitation of such waves is examined in the presence of toroidal magnetic field. The result shows that one of these waves might be considered to induce the formation of the observed magnetic unipolar regions of the sun.Visiting Scientist to the High Altitude Observatory on leave of absence from the Department of Astronomy, University of Tokyo, Japan.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Impact fragmentation experiments of basalts and pyrophyllites

Results of impact fragmentation experiments for basalts and pyrophyllites are reported. Aluminum cylindrical projectiles were impacted on cubic basalt and pyrophyllite targets at velocities of 70 to 990 m/sec. The targets and projectiles were 20 g to 3.3 kg and 2 to 20 g in weight respectively. Weights of the fragments produced by impacts were measured and the size distributions of fragments were examined. Data of the largest fragment mass (m_L) normalized to the original target mass (M_t), m_L/M_t, correlate better with the nondimensional impact stress, P_I, a new scaling parameter introduced by H. Mizutani, Y. Takagi, and S. Kawakami (1984, in preparation) than the conventional projectile's kinetic energy per unit target mass, E/M_t, used in the previous studies. All the m_L/M_t data for basalts obtained in the present study are summarized by m_L/M_t = 2.95 × 10^?2P_I^?1 where P_I = P₀L³/YR³, P₀ = peak shock pressure, L = projectile size, R = target size and Y = material strength of target. For aluminum targets, however, the m_L/M_t is 2.5 orders of magnitude larger than that for brittle targets at impacts with the same P_I. Size distributions of fragments expressed in a log N - log (m/M_t) diagram divided into three regimes bounded by two inflection points. In each regime the curve is expressed by $\text{N (>}\text{m}\text{M}{}_{\mathrm{t}}\text{) = A (}\text{m}\text{M}{}_{\mathrm{t}}\text{)}{}^{\mathrm{?a}}$. The slopes, a, of the log $\text{N -}\text{log}\text{(}\text{m}\text{M}{}_{\mathrm{t}}\text{)}$ curves in the regimes of a large and a medium size range are positively correlated with the nondimensional impact stress, P_I, and expressed as a = C₃ + a₃log P_I. The slopes, a, in the smallest size range are, on the other hand, nearly constant and have values of $\text{0.5}\text{to}\text{0.7 (}\text{1}\text{2}\text{?}\text{2}\text{3}\text{)}$. Present results indicate that the impact fragmentation is scaled well by the new scaling parameter, P_I, of Mizutani, Takagi, and Kawakami and that the present experimental data may shed new light on planetary impact processes.     

Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.     

Petrographic and mineralogical study of hydrothermal alteration of the Rokko Granite at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line in western Japan

Field, hand specimen, and microscopic investigations alongside X-ray diffraction analyses revealed four types of hydrothermal alteration (Type-A, -B, -C, and -D) based on the mode of occurrence of altered rocks and alteration mineral assemblage at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line (ATTL) in western Japan. Type-A alteration locally occurred as gray alteration halos with sulfide minerals. Type-B and -C alterations were confined to fault gouge veins and occurred as greenish-gray veins and brown veins, respectively. Type-C alteration crosscut Type-B alteration. These alterations were associated with a number of granitic fragments including cohesive breccia and micrographic facies. Type-D alteration occurred locally in brown sediments. Different mineralogical features in the four alterations are summarized as (Type-A) illite; (Type-B) chlorite; (Type-C) limonite (Fe³⁺ hydroxides and goethite) and calcite; and (Type-D) limonite. We propose that the alterations can be broadly divided into Paleocene hydrothermal alteration (Type-A) and post-Late Miocene hydrothermal alteration (Type-B, -C, and -D): Type-A alteration occurred at approximately 200 °C during hydrothermal activity after a granitic intrusion in Late Cretaceous; Type-B, -C and -D alterations occurred under hydrothermal activity accompanying deep fluids with repeated ascents invoked by the seismicity of the ATTL after the Late Miocene. The fluids may have been the “Arima-type thermal waters” (i.e., mixtures of convective groundwater and Na-Ca-Cl-HCO₃-type fluids). Type-B alteration occurred in fractures at depths where the temperature was ≥150 °C. Type-C alteration overprinted Type-B alteration as a result of mixing of new deep fluids and descending oxidized meteoric water near the surface. Fe³⁺ hydroxides and calcite precipitated from the fluids due to the oxidation of Fe²⁺ and the degassing of CO₂, respectively, at ambient to near-boiling temperatures. When the ascending fluids gushed out from the fractures, they generated Type-D alteration at the surface under similar temperature conditions due to the oxidation of Fe²⁺.     

Out‐of‐plane stability of buckling‐restrained braces including moment transfer capacity

Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.     

Deep water observations of extreme waves with moored and free GPS buoys

Point-positioning GPS-based wave measurements were conducted by deep ocean (over 5,000 m) surface buoys moored in the North West Pacific Ocean in 2009, 2012, and 2013. The observed surface elevation bears statistical characteristics of Gaussian, spectrally narrow ocean waves. The tail of the averaged spectrum follows the frequency to the power of ?4 slope, and the significant wave height and period satisfies the Toba’s 3/2 law. The observations compare well with a numerical wave hindcast. Two large freak waves exceeding 13 m in height were observed in October 2009 and three extreme waves around 20 m in height were observed in October 2012 and in January 2013. These extreme events are associated with passages of a typhoon and a mid-latitude cyclone. Horizontal movement of the buoy revealed that the orbital motion of the waves at the peak of the wave group mostly exceed the weakly nonlinear estimate. For some cases, the orbital velocity exceeded the group velocity, which might indicate a breaking event but is not conclusive yet.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.