Summer monsoon rainfall scenario over Bangladesh using a high-resolution AGCM

Summer monsoon rainfall was simulated by a global 20 km-mesh atmospheric general circulation model (AGCM), focusing on the changes in the summer monsoon rainfall of Bangladesh. Calibration and validation of AGCM were performed over Bangladesh for generating summer monsoon rainfall scenarios. The model-produced summer monsoon rainfall was calibrated with a ground-based observational data in Bangladesh during the period 1979–2003. The TRMM 3B43 V6 data are also used for understanding the model performance. The AGCM output obtained through validation process made it confident to be used for near future and future summer monsoon rainfall projection in Bangladesh. In the present-day (1979–2003) climate simulations, the high-resolution AGCM produces the summer monsoon rainfall better as a spatial distribution over SAARC region in comparison with TRMM but magnitude may be different. Summer monsoon rainfall projection for Bangladesh was experimentally obtained for near future and future during the period 2015–2034 and 2075–2099, respectively. This work reveals that summer monsoon rainfall simulated by a high-resolution AGCM is not directly applicable to application purpose. However, acceptable performance was obtained in estimating summer monsoon rainfall over Bangladesh after calibration and validation. This study predicts that in near future, summer monsoon rainfall on an average may decrease about ?0.5 % during the period 2015–2034 and future summer monsoon rainfall may increase about 0.4 % during the period 2075–2099.     

Possible variation in methane flux caused by gas hydrate formation on the northeastern continental slope off Sakhalin Island, Russia

The Sakhalin Slope Gas Hydrate Project (SSGH) is an international collaborative effort by scientists from Japan, Korea, and Russia to investigate natural gas hydrates (GHs) that have accumulated on the continental slope off Sakhalin Island, Okhotsk Sea. From 2009 to 2011, field operations of the SSGH-09, -10, and -11 projects were conducted. GH-bearing and -free sediment cores were retrieved using steel hydro- and gravity corers. The concentrations of sulfate ions in sediment pore waters were measured to investigate sulfate concentration–depth profiles. Seventeen cores showed linear depth profiles of sulfate concentrations. In contrast, eight cores and two cores showed concave-up and -down profiles plausibly explained by sudden increase and decrease in methane flux from below, respectively, presumably caused by the formation of gas hydrate adjacent to the core sampling sites.     

Seismic response of a cut‐and‐cover tunnel isolated by polymer material

An effective method for the seismic retrofitting of the sidewalls of cut‐and‐cover tunnels has not yet been established. Thus, a new method of seismic retrofitting for cut‐and‐cover tunnels, called the ‘polymer isolation method’, is developed here. In this method, thin walls made of polymer materials, called ‘isolation walls’, are inserted between the ground and the sidewalls of a tunnel. We demonstrate the effectiveness of the proposed method in reducing the seismic response of tunnels by using some numerical simulations. It is found that the proposed method depends on the thickness of the soil cover over the tunnel and the ratio of the stiffness between the soil and the structure. Furthermore, a simple chart is proposed for convenience to represent the applicability of the polymer isolation method to the design of seismic retrofits for cut‐and‐cover tunnels. Although this particular chart has been obtained through a limited case, some other typical cases in which the chart can also be implemented for special conditions are addressed, and the applicability and the limitations of this chart are suggested for possible conditions of the ground and of tunnel structures. Copyright © 2012 John Wiley & Sons, Ltd.     

An efficient method to compute the dynamic response of a fluid-filled crack

The vibration of a fluid-filled crack is considered to be one of the most plausible source mechanisms for the long-period events and volcanic tremors occurring around volcanoes. As a tool for the quantitative interpretation of source process of such volcanic seismic signals, we propose a method to numerically simulate the dynamic response of a fluid-filled crack. In this method, we formulate the motions of the fluid inside and the elastic solid outside of the crack, using boundary integrals in the frequency domain and solve the dynamic interactions between the fluid and the elastic solid using the point collocation method. The present method is more efficient compared with the time-domain finite difference method, which has been used in simulations of a fluid-filled crack and enables us to study the dynamics of a fluid-filled crack over a wide range of physical parameters. The method also allows us direct calculation of the attenuation quality factor of the crack resonance, which is an indispensable parameter for estimating the properties of the fluid inside the crack. The method is also designed to be flexible to many applications, which may be encountered in volcano seismology, and thus, extensions of the method to more complicated problems are promising.     

Chromitite and peridotite from Rayat, northeastern Iraq, as fragments of a Tethyan ophiolite

Ophiolitic rocks (chromitites and serpentinized peridotites) were petrologically examined in detail for the first time from Rayat, in the Iraqi part of the Zagros thrust zone, an ophiolitic belt. Almost all the primary silicates have been altered out, but chromian spinel has survived from alteration and gives information about the primary petrological characteristics. The protolith of the serpentinite was clinopyroxene-free harzburgite with chromian spinel of intermediate Cr# (= Cr/[Cr + Al] atomic ratio) of 0.5 to 0.6. The harzburgite with that signature is the most common in the mantle section of the Tethyan ophiolites such as the Oman ophiolite, and is the most suitable host for chromitite genesis. Except for one sample, which has Cr# = 0.6 for spinel, the Cr# of spinel is high, around 0.7, in chromitite. The variation in Cr# of spinel in chromitite observed here has been also reported in the Oman ophiolite. The peridotite with chromitite pods exposed at Rayat was derived from an ophiolite similar in petrological character to the Oman ophiolite, one of the typical Tethyan ophiolites (fragments of Tethyan oceanic lithosphere). This result is consistent with the previous interpretation based on geological analysis.     

Gas hydrate saturation at Site C0002, IODP Expeditions 314 and 315, in the Kumano Basin,Nankai trough

The degree of gas hydrate saturation at Integrated Ocean Drilling Program (IODP) Site C0002 in the Kumano Basin, Nankai Trough, was estimated from logging‐while‐drilling logs and core samples obtained during IODP Expeditions 314 and 315. Sediment porosity data necessary for the calculation of saturation were obtained from both core samples and density logs. Two forms of the Archie equation (‘quick‐look’ and ‘standard’) were used to calculate gas hydrate saturation from two types of electrical resistivity log data (ring resistivity and bit resistivity), and a three‐phase Biot‐type equation was used to calculate gas hydrate saturation from P‐wave velocity log data. The gas hydrate saturation baseline calculated from both resistivity logs ranges from 0% to 35%, and that calculated from the P‐wave velocity log ranges from 0% to 30%. High levels of gas hydrate saturation (>60%) are present as spikes in the ring resistivity log and correspond to the presence of gas hydrate concentrations within sandy layers. At several depths, saturation values obtained from P‐wave velocity data are lower than those obtained from bit resistivity data; this discrepancy is related to the presence of free gas at these depths. Previous research has suggested that gas from deep levels in the Kumano Basin has migrated up‐dip towards the southern and seaward edge of the basin near Site C0002. The high saturation values and presence of free gas at site C0002 suggest that a large gas flux is flowing to the southern and seaward edge of the basin from a deeper and/or more landward part of the Kumano Basin, with the southern edge of the Kumano Basin (the location of site C0002) being the main area of fluid accumulation.     

Short-term flow fluctuations in Onagawa Bay,Japan, as revealed by long-term mooring observation

Short-term flow fluctuations in the southern central part of Onagawa Bay were examined using long-term mooring and hydrographic data observed during the period from May 2013 to April 2014. The short-term flow fluctuations were dominant in the periodic bands of 15–27 days and shorter than 10 days. The principal and minor components of these flow fluctuations were respectively along and across the local isobaths, which are almost parallel in the north direction. The northward flow fluctuations along the local isobaths were correlated with the northeastward wind fluctuations in both periodic bands, and these correlations were more evident from fall to winter. On the basis of these results, the northward flows are regarded as wind-induced barotropic coastal jets. On other hand, the eastward flow fluctuations across the local isobaths were related to inflow and outflow via the bay mouth or the Izushima Channel. Inflow and outflow with reverse flow at lower depths formed in summer, but those with vertically uniform flow tended to form in winter. The main summertime inflow and outflow were driven by horizontal gradients in density. These permit us to regard the main summertime inflow and outflow as gravitational circulation. Also, the summertime inflow can be intermittently caused by internal waves.     

Preferred orientation of the trace fossil Entradichnus meniscus in eolian dune strata (Djadokhta Formation) at Tugrikiin Shiree,southern Mongolia and its paleoecological implications

Eolian sand dune deposits of the Upper Cretaceous Djadokhta Formation at Tugrikiin Shiree, southern Mongolia, yield not only dinosaur skeletal remains but also numerous trace fossils produced by invertebrates. This paper describes the trace fossil Entradichnus meniscus, a long unlined and unbranched trail that is filled with meniscate laminae and occurs characteristically in positive epirelief. The trail is straight to gently meandering, parallel to the foreset laminae of the eolian dunes, and exhibits a significant preferred orientation parallel to the depositional dip of the cross‐stratification laminae. In addition, almost all the crescentic internal laminae of the trail show concave down‐dips. These features indicate that the trails were produced beneath the slipface of eolian dunes by the downward burrowing of the trace‐makers. This occurrence mode of E. meniscus of the Mongolian Cretaceous is very similar to that described from the Jurassic eolian dune deposits in North America. Hence, the downward burrowing of the E. meniscus animal might be a common feature in arid eolian dune deposits at least during the Jurassic and Cretaceous, and possibly reflecting a behavioral response to the morphology of large sand dunes under an arid climate.