Calibration and validation of the ocean color version-3 product from ADEOS OCTS

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.     

Particle acceleration in the 1981 April 1 flare

The large microwave burst of 1981 April 1, which was accompanied by both hard X-ray and γ-ray emissions, was analyzed to study the acceleration of particles in the impulsive phase. The analysis suggests the following results. (1) Electrons were accelerated up to energies of several hundred keV in a low loop. On the other hand, electrons were accelerated to relativistic energy without injection of pre-accelerated electrons near the top of a large loop where energetic ions were also probably accelerated. (2) The mechanism for accelerating electrons to relativistic energy and also ions was different from that for accelerating electrons up to energies of several hundred KeV and was closely related with upward motion of a flare loop.     

Estimation of the annual primary production of the lichen Cetrariella delisei in a glacier foreland in the High Arctic, Ny-Ålesund, Svalbard

The fruticose lichen Cetrariella delisei is among the dominant lichen species in the deglaciated High Arctic areas of Svalbard. As part of a study of carbon cycling in the High Arctic, we aimed to estimate the primary production of lichen in a deglaciated area in Ny-Ålesund, Svalbard (79° N), by examining the effects of abiotic factors on the net photosynthesis ( Pn ) and dark respiration ( R ) rates of C. delisei . Experiments were conducted in the snow-free season of 2000 using an open-flow gas exchange system with an infrared gas analyser. Positive photosynthetic activities were observed on rainy days or soon after rainfall when the thallus water content was high, whereas photosynthetic activities dropped below the detectable limit on clear days because of the low thallus water content. Under a sufficiently high thallus water content and close to light saturation, Pn was nearly constant over a wide temperature range of 4–20 °C, while R increased with increasing temperature. We constructed a model for estimating the net primary production ( NPP ) of lichen based on the relationships between abiotic factors and the CO₂ exchange rate. The mean, minimum and maximum NPP values in the snow-free season, estimated using meteorological data obtained from 1995–2003, were 5.1, 1.0 and 8.4 g dry wt. m⁻² snow-free season⁻¹, respectively. These results suggest that NPP is highly variable and the contribution of lichen to carbon input is small compared with that of vascular plants and mosses in the study site.     

Bayesian and Neural Network Approaches to Estimate Deep Temperature Distribution for Assessing a Supercritical Geothermal System: Evaluation Using a Numerical Model

The temperature distribution at depth is a key variable when assessing the potential of a supercritical geothermal resource as well as a conventional geothermal resource. Data-driven estimation by a machine-learning approach is a promising way to estimate temperature distributions at depth in geothermal fields. In this study, we developed two methodologies—one based on Bayesian estimation and the other on neural networks—to estimate temperature distributions in geothermal fields. These methodologies can be used to supplement existing temperature logs, by estimating temperature distributions in unexplored regions of the subsurface, based on electrical resistivity data, observed geological/mineralogical boundaries, and microseismic observations. We evaluated the accuracy and characteristics of these methodologies using a numerical model of the Kakkonda geothermal field, Japan, where a temperature above 500 °C was observed below a depth of about 3.7 km. When using geological and geophysical knowledge as prior information for the machine learning methods, the results demonstrate that the approaches can provide subsurface temperature estimates that are consistent with the temperature distribution given by the numerical model. Using a numerical model as a benchmark helps to understand the characteristics of the machine learning approaches and may help to identify ways of improving these methods.

     

Volume transports proceeding to the Kuroshio Extension region and recirculating in the Shikoku Basin

The volume transport of the Kuroshio, the western boundary current of the North Pacific subtropical gyre, varies vigorously due to merging of disturbances propagating from the entire North Pacific. Taking into account the recirculation in the Shikoku Basin by the zonal observation line at 30°N to the west of the Izu–Ogasawara Ridge, we estimated the volume transport in the top 1,000 m layer toward the Kuroshio Extension region. The volume transport of the local recirculation gyre in the Shikoku Basin increases associated with the westward extension of the gyre, particularly in the period of the large meandering path of the Kuroshio south of Japan. Meanwhile, most of the transport variations toward the Kuroshio Extension region correspond to those of the Kuroshio transport on the continental slope south of Japan, which vary independently of those of the recirculation gyre.     

Lithology and palynology of Neogene sediments on the narrow edge of the Kitakami Massif (basement rocks), northeast Japan: Significant change for depositional environments as a result of plate tectonics

Abstract A controversial stratigraphic section, the Taneichi Formation, is exposed along the Pacific Coast of northeastern Honshu, the main island of the Japanese Archipelago. Although most sediments of the formation have long been dated as late Cretaceous, the northern section of it has been assigned to (i) the Upper Cretaceous; (ii) the Paleogene; or (iii) the Neogene. In the present report, we present the data of palynological and sedimentological studies, showing that the northern section should be assigned to the Neogene. A more important point in the present study is that we invoke some basic principles of fluvial sedimentology to resolve this stratigraphic subject. The lignite layers full of Paleogene–Miocene dinoflagellate cysts and pollen assemblages drape over the boulder‐sized (>40 cm in diameter) clasts in the northern section. However, the layers totally consist of aggregates of small lignite chips, indicating that the lignites are allochthonous materials. The mega‐clasts with derived microfossils in the lignites are thought to have been deposited as Neogene fluvial (flood) sediments in the newly formed Japanese Archipelago. Prior to the Miocene, the northern Honshu was part of the Eurasian Plate, thus the boulder‐sized clasts cannot be envisaged as long river flood deposits along the continental Paleogene Pacific Coast. Instead, the mega‐clasts with the draping lignites were probably derived from nearby Miocene highlands in the newly born island arc.     

High parallelization efficiency in barotropic-mode computation of ocean models based on multi-grid boundary ghost area

In general, barotropic-mode computation requires the largest communication time in ocean models because of its iterative nature, when parallel computation is performed based on regional partitioning. In this study, reduction in the overhead time included in the communication in the parallel computation of the barotropic mode is considered to achieve a high parallelization efficiency of ocean models. We verify that the reduction in the communication frequency based on the multi-grid boundary ghost area reduces the total communication time. We find that this is because the sum of several kinds of overhead time for communication occupies a fairly large part of the total communication time. We discuss the trade-off between the decrease in communication time and the increase in computation time due to increased boundary area in such cases, leading to a determination of a suitable width of the multi-grid boundary that minimizes the total required time. We also discuss the efficiencies of the one- and two-dimensional partitioning of the model domain, when a multi-grid boundary is used. In general, two-dimensional partitioning is more efficient than one-dimensional for large partitioning numbers.     

Interactive behavior of soil–pile-superstructure system in transient state to liquefaction by means of large shake table tests

Shaking table tests were conducted by means of a large-scale laminar box with 4 m in length, 2 m in width and 2 m in height in order to investigate behavior of a soil-pile-superstructure system in liquefiable ground. A model two-storey structure, supported by a pile group, was set in a saturated sand deposit, and subjected to a sinusoidal base motion with increasing amplitude. Discussions are focused on the transient behavior until soil liquefaction occurs. Main interests are characteristics of springs used in a sway-rocking model and a multi-freedom lumped mass (MFLM) model that are frequently used in soil–pile interaction analysis. The spring constant in the sway-rocking model is represented by restoring force characteristics at the pile head, and that in the MFLM system is represented by an interaction spring connecting the pile to the free field. The transient state prior to soil liquefaction is shown to be important in the design of a pile because dynamic earth pressure shows peak response in this state. The reduction of the stiffness due to excess porewater generation and strain dependent nonlinear behavior is evaluated.     

Trace element distribution in mineral separates of the Allende inclusions and their genetic implications

Concentrations of the REE, Sc, Co, Fe, Zn, Ir, Na and Cr were determined by instrumental neutron activation and mass spectrometric isotope dilution analysis for mineral separates of the coarseand fine-grained types (group I and II of Martin and Mason's classification) of the Allende inclusions.These data, combined with data on mineral/liquid partition coefficients, oxygen isotope distributions and diffusion calculations, suggest the following: (1) Minerals in the coarse-grained inclusions (group I) crystallized in a closed system with respect to refractory elements. On the other hand, differences in oxygen isotope distributions among minerals preclude a totally molten stage in the history of the inclusion. Group I inclusions were formed by rapid condensation (either to liquid or solid) in a supercooled solar nebula; extrasolar pyroxene and spinel dust were included but not melted in the condensing inclusions, thus preserving their extrasolar oxygen isotope composition. REE were distributed by diffusion during the subsequent heating at subsolidus temperatures; because oxygen diffuses much more slowly at these temperatures, the oxygen isotope anomalies were preserved. (2) The fine-grained (group II) inclusions were also formed by condensation from a super-cooled nebular gas; however, REE-rich clinopyroxene and spinel were formed early and REE-poor sodalite and nepheline were formed later and mechanically mixed with clinopyroxene and spinel to form the inclusions. The REE patterns of the bulk inclusions and the mineral separates are fractionated, indicating that REE abundances in the gaseous phase were already fractionated at the time of condensation of the minerals. (3) Pre-existing Mg isotope anomalies in the coarse-grained inclusions must have been erased during the heating stage thus resetting the ²⁶Al-²⁶Mg chronometer.