Microboudin structures of piemontite along the Sambagawa metamorphic belt, Japan: implications for lateral variation of differential stress during regional metamorphism

Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p‐values range from < 0.01 to 0.7 in this region. Most samples from Wakayama in the mid‐belt area have p‐values of 0.4–0.6, whereas those from western Shikoku have p‐values of < 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.     

Carbon and Noble Gas Isotopes in the Tengchong Volcanic Geothermal Area, Yunnan, Southwestern China

Carbon and noble gas isotope analyses are reported for bubbling gas samples from the Tengchong volcanic geothermal area near the Indo-Eurasian suture zone. All samples contain a resolvable component of mantle-derived 3He. Occurrence of mantle-derived 3He coincides with surface volcanism. However, 3He occurs over a larger geographic areathan do surface volcanics. δ13C values for CO2 and CH4 vary from -33.4‰ to 1.6 ‰ and from -52.8‰ to -2.8‰, respectively. He and C isotope systematics indicate that CO2 and CH4 in the CO2-rich gases originated predominantly from magmatic component mixed with crustal CO2 produced from carbonate. However, breakdown of organic matter and near-surface processes accounts for the CH4 and CO2 in N2-rich gases. 3He/4He ratio distribution pattern suggests that mantle-derived He and heat sources of high-temperature system in central Tengchong originate from a hidden magma reservoir at subsurface. CO2-rich gases with the highest 3He/4He ratio (5.2 Ra) may be representative of the     

Geochemical fixation of rare earth elements into secondary minerals in sandstones beneath a natural fission reactor at Bangombé, Gabon

To study geochemical processes for migration and fixation of fissiogenic rare earth elements (REE) in association with uranium dissolution, in situ isotopic analyses using an ion microprobe were performed on U- and REE-bearing secondary minerals, such as coffinite, françoisite, uraniferous goethite, and uraninite found in a sandstone layer 30 to 110 cm beneath a natural fission reactor at Bangombé, Gabon. Phosphate minerals such as phosphatian coffinite and françoisite with depleted ²³⁵U (²³⁵U/²³⁸U = 0.00609 to 0.00638) contained large amount of fissiogenic light REE, while micro-sized uraninite grains in a solid bitumen aggregate have normal U isotopic values (²³⁵U/²³⁸U = 0.00725) and small amount of fissiogenic REE components. The proportions of fissiogenic and non-fissiogenic REE components in four samples from the core of BAX03 vary in depth ranging from 30 cm to 130 cm beneath the reactor, which suggests mixing between fissiogenic isotopes from the reactor and non-fissiogenic isotopes from original minerals in the sandstone. Significant chemical fractionation was observed between Ce and the other REE in the secondary minerals, which shows evidence of an oxidizing atmosphere during their formation. Pb-isotopic analyses of individual minerals do not directly provide chronological information because of the disturbance of U-Pb decay system due to recent geologic alteration. However, systematic Pb-isotopic results from all of the minerals reveal the mobilization of fissiogenic isotopes, Pb and U from the reactor in association with dolerite dyke intrusion ∼0.798 Ga ago and the formation of the secondary minerals by mixing event between 2.05 Ga-old original minerals and reactor materials due to recent alteration.     

长江冲淡水区细菌生产力研究

为了解细菌在长江口冲淡水区生态系营养动力学过程中的重要作用,笔者于1997年10月10日至20日,1998年5月14日至6月1日在观测海区以及在绿华山海域设置大水体围隔生态系实验装置进行细菌生产力的现场观测研究.结果表明,秋季观测海区平均细菌生产力(C)为(1.44±1.30)μg/(dm3·h),高值出现在测区中部的A₃,B₃和C₃站.春季测区表层细菌生产力(2.43±1.22)μg/(dm3·h)高于底层(1.01±0.43)μg/(dm3·h),高值出现在测区中部的A₃和B断面诸站.秋、春季平均细菌生产力相当于浮游植物初级生产力的23%.秋季和春季表层细菌数量分别为(5.22×108±0.88×108)个/dm3和(1.97×108±1.10×108)个/dm3.1998年5月18日至6月1日在围隔实验点的自然海区中细菌生产力变幅范围为0.13～5.79μg/(dm3·h),平均值为(2.47±1.60)μg/(dm3·h).围隔装置内加可溶性磷(PO₄3-)实验,春季细菌生产力由1.28μg/(dm3·h)增长至32.20μg/(dm3·h),其增长幅度低于秋季1.43～43.47μg/(dm3·h).油污染实验中细菌生产力由6.61μg/(dm3·h)增长至37.97μg/(dm3·h),呈逐日上升趋势.     

Ca, Al-rich inclusions in Yamato 791717 (CO3) carbonaceous chondrite: Formation and alteration

In three polished thin sections of Yamato 791717 (CO3). fifty-five Ca, Al-rich inclusions were found, which include two hibonite-bearing, eight melilite-rich and forty-five spinel-pyroxene inclusions. Based on the petrography and mineral chemistry of the inclusions, it is proposed that the melilite-rich inclusions and spinel-pyroxene inclusions condensed in the solar nebula, and the hibonite-bearing inclusions crystallized from melts. The heavy alteration of the inclusions in Yamato 791717, which probably took place under a very oxidizing condition in the solar nebular, is also confirmed. Project supported by the National Natural Science Foundation of China (Grant No. 49673200). and by the Japanese Society for Promotion of Sciences (JSPS).     

Classification and distribution of Oligocene Aetiocetidae (Mammalia; Cetacea; Mysticeti) from western North America and Japan

Abstract Fossil whales in the very rare, primitive, extinct cetacean family Aetiocetidae are small, relict, toothed mysticetes that persisted into Late Oligocene time after more highly derived baleen-bearing mysticetes had already evolved. No known aetiocetid could be ancestral to baleen-bearing mysticetes, but aetiocetid morphology is in many ways intermediate between archaeocetes and baleen-bearing mysticetes, demonstrating the probable transitional steps passed through in the evolution of baleen-bearing mysticetes. Their discovery indicates that mysticetes evolved from Archaeocetes, and supports theories of the monophyly of Cetacea. Late Oligocene aetiocetids have been found on both sides of the North Pacific Ocean: on Vancouver Island, British Columbia, Canada; in Oregon and Washington, USA; in Baja California Sur, México; and the islands of Kyushu and Hokkaido, Japan. The most primitive North American aetiocetid, Chonecetus sookensis Russell, 1968, is from the early Late Oligocene Hesquiat Formation on Vancouver Island, British Columbia, Canada. A more derived, Late Oligocene species, Chonecetus goedertorum Barnes and Furusawa, new species, from the Late Oligocene Pysht Formation, Olympic Peninsula, Washington, has the primitive placental mammalian tooth count of 11/11. The type genus of the family, Aetiocetus Emlong, 1966, has as its type species, A. cotylalveus Emlong, 1966, known only from the Late Oligocene Yaquina Formation on the coast of Oregon. It has 11 upper teeth on each side of the rostrum. A more derived species, Aetiocetus weltoni Barnes and Kimura, new species, from a higher stratigraphic level in the Yaquina Formation, has a more posteriorly positioned cranial vertex and a tooth count of 11/12. We describe four new species of aetiocetids in three genera from the Late Oligocene Morawan Formation near Ashoro, Hokkaido, Japan. The most primitive, Ashorocetus eguchii Barnes and Kimura, new genus and species, has a primitive stage of cranial telescoping, and is closely related to Chonecetus Russell, 1968. Another, Morawanocetus yabukii Kimura and Barnes, new genus and species, in some ways intermediate between Chonecetus and Aetiocetus, has a suite of unique derived characters, including a much foreshortened brain case. The third, Aetiocetus tomitai Kimura and Barnes, new species, is the most primitive species of Aetiocetus yet discovered. The fourth, Aetiocetus polydentatus Sawamura, new species, the most derived species of Aetiocetus known, has a highly telescoped cranium, homodonty, polydonty and a dental count of 13–14/14–15. The fossil record now indicates considerable diversity in the family, with several different contemporaneous lineages in three new subfamilies: Chonecetinae, Morawanocetinae and Aetiocetinae. Aetiocetids are not known outside the North Pacific. Many Recent mysticetes are essentially cosmopolitan, and aetiocetids might have also been relatively widely dispersed. We suspect that with time their remains will be found around other ocean basins also. If so, then they may be potentially useful in trans-oceanic geological correlations.     

Large-Eddy Simulation of Pollutant Removal from a Three-Dimensional Street Canyon

Large-eddy simulations were conducted to investigate the mechanism of pollutant removal from a three-dimensional street canyon. Five block configurations with aspect ratios (building height to length) of 1, 2, 4, 8 and $\infty $ were used to create an urban-like array. A pollutant was released from a ground-level line source at the centre of the target canyon floor. For smaller aspect ratios, the relative contribution of the turbulent mass flux to net mass flux at the roof level, which was spatially averaged along the roof-level ventilation area, was closer to unity, indicating that turbulent motions mainly affected pollutant removal from the top of the canyon. As aspect ratio increased, the relative contribution became smaller, owing to strong upwind motions. However, the relative contribution again reached near unity for the infinite aspect ratio (i.e. a two-dimensional street canyon) because of lowered lateral flow convergence. At least 75 % of total emissions from the three-dimensional street canyon were attributable to turbulent motions. Pollutant removal by turbulent motions was related to the coherent structures of low-momentum fluid above the canyons. Though the coherent structure size of the low-momentum fluid differed, the positions of low-momentum fluid largely corresponded to instantaneous high concentrations of pollutant above the target canyon, irrespective of canyon geometry.     

A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models

We developed a simple, single-layer urban canopy model, and comparedit to both multi-layer and slab models. Our single-layer model has thefollowing features: (a) It is a column model of energy and momentumexchange between an urban surface and the atmosphere, (b) it includesthe influence of street canyons, which are parameterized to representthe urban geometry, (c) it includes shadowing from buildings andreflection of radiation, and (d) it estimates both the surfacetemperatures of, and heat fluxes from, three surface types: roof, wall,and road. In the simulation of the single-layer model, the roof washottest during the daytime, but coolest from midnight to early morning.This is consistent with output from the multi-layer model and fieldobservations at a residential area on a clear, summer day. The diurnalvariation of the energy budget from the single-layer model agrees wellwith that from the multi-layer model. Our single-layer model'sperformance is nearly that of a multi-layer model for studyingmesoscale heat islands. Nevertheless, it is simply parameterized,and thus easily included in larger-scale atmospheric models. The slabmodel has the largest nighttime cooling rate of the three models. Toovercome this, it needs more adjustments than for the canopy models.