Tectono-thermal modeling of the Yinggehai Basin,South China Sea

Based on the observed data, the average value of surface heat flow in the Yinggehai Basin is calculated and it turns out to be 84.1 mW/m². The thermal evolution of the basin since the Cenozoic era has been attempted by tectono-thermal modeling. Three-phase extension made the basin become hotter and hotter, reaching its climax in paleo-temperature history since 5.2 Ma. And nowadays, the basin is in the heat flow decreasing period. During the Cenozoic era, the basement heat flow remained at 50–70 mW/m² all the time. This is related to the degree of each extension phase, stretching rate mode and also the limited basin scale. Modeling results also show that, the surface heat flow is controlled mainly by the basement heat flow, and less than 20% comes from radiogenic heat production in the sediments of the basin     

Structural and fabric analyses of basal slip zone of the Jin’nosuke-dani landslide, northern central Japan: its application to the slip mechanism of decollement

We describe in detail the deformation structures and textures of a large-scale landslide body that developed in the Betto-dani Valley in northern central Japan. We studied the shape-preferred orientation of clasts and clay flakes and the development of internal shear planes within the slip zone of the landslide. The slip has an average rate of 5–10 cm/year under the overburden pressure of approximately 1.6 MPa; these values are similar to those of the proto-decollement zone of the Nankai accretionary prism in SW Japan. The anisotropy of magnetic susceptibility of samples obtained from the slip zone reveals that the long axes of clay flakes define an imbricate structure. The slip was due to a long-term periodical creep, which occurs during the thaw seasons with an average slip rate of 0.16–0.32 μm/min. During the creep, the long axes of grains including clay flakes in the slip zone are developed from parallel to perpendicular to the slip direction. The observed textures provide a clue to elucidate the deformation textures and process in the decollement zone of the Nankai prism.     

∼3,850 Ma tonalites in the Nuuk region,Greenland: geochemistry and their reworking within an Eoarchaean gneiss complex

The Eoarchaean (>3,600 Ma) Itsaq Gneiss Complex of southern West Greenland is dominated by polyphase orthogneisses with a complex Archaean tectonothermal history. Some of the orthogneisses have c. 3,850 Ma zircons, and they vary from rare single phase metatonalites to more common complexly banded migmatites. This is due to heterogeneous strain, in situ anatexis and granitic veining superimposed during younger tectonothermal events. In the single-phase tonalites with c. 3,850 Ma zircon, oscillatory-zoned prismatic zircon is all 3,850 Ma old, but shows patchy ancient loss of radiogenic Pb. SHRIMP spot analyses and laser ablation ICP-MS depth profiling show that thin (usually < 10 μm) younger (3,660–3,590 Ma and Neoarchaean) shells of lower Th/U metamorphic zircon are present on these 3,850 Ma zircons. Several samples with this simple zircon population occur on islands near Akilia. In contrast, migmatites usually contain more complex zircon populations, with often more than one generation of igneous zircon present. Additional zircon dating of banded gneisses across the Complex shows that samples with c. 3,850 Ma igneous zircon are not just a phenomenon restricted to Akilia and adjacent islands. For example, migmatites from Itilleq (c. 65 km from Akilia) contain variable amounts of oscillatory-zoned 3,850 Ma and 3,650 Ma zircon, interpreted, respectively, as the rock age and the time of crustal melting under Eoarchaean metamorphism. With only 110–140 ppm Zr in the tonalites and likely magmatic temperatures of >850°C, zircon solubility–melt composition relationships show that they were only one-third saturated in zircon. Any zircon entrained in the precursor magmas would thus have been highly soluble. Combined with the cathodoluminesence imaging, this demonstrates that the c. 3,850 Ma oscillatory zoned zircon crystallised out of the melt and hence gives a magmatic age. Thus the rare well-preserved tonalites and palaeosome in migmatites testify that c. 3,850 Ma quartzo–feldspathic rocks are a widespread (but probably minor) component in the Itsaq Gneiss Complex. C. 3,850 Ma zircon with negative Eu anomalies (showing growth in felsic systems) also occurs as detrital grains in rare c. 3,800 Ma metaquartzites and as inherited grains in some 3,660 Ma granites (sensu stricto). These demonstrate that still more c. 3,850 Ma rocks were present, but were recycled into Eoarchaean sediments and crustally derived granites. The major and trace element characteristics (e.g. LREE enrichment, HREE depletion, low MgO) of the best-preserved c. 3,850 Ma rocks are typical of Archaean TTG suites, and thus argue for crust formation processes involving important contributions from melting of hydrated mafic crust to the earliest Archaean. Five c. 3,850 Ma tonalites were selected as the best preserved on the basis of field criteria and zircon petrology. Four of these samples have overlapping initial ɛ_Nd (3,850 Ma) values from +2.9 to +3.6± 0.5, with the fourth having a slightly lower value of +0.6. These data provide additional evidence for a markedly LREE-depleted early terrestrial mantle reservoir. The role of c. 3,850 Ma crust should be considered in interpreting isotope signatures of the younger (3,800–3,600 Ma) rocks of the Itsaq Gneiss Complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Iodine concentrations of soils near Trabzon, Turkey: a region of endemic goiter

Iodine contents of soils developed over the major rock formations of the northern zone of the Eastern Pontide Tectonic Belt (Northeastern Turkey) have been investigated with respect to soil-parent rock relationship, effect of topography, elevation, and climate to construe its effect on the health of the local population. Samples were collected from the A and B horizons of the soils developed over the major stratigraphic units constituting the eastern Pontides, including the Lower Basic Complex of Jurassic-Lower Cretaceous age, the Berdiga limestone (Jurassic-lower Cretaceous), the Dagbasi granitoid (Upper Cretaceous), volcano-sedimentary sequence of Upper Cretaceous age, ore-bearing and barren dacites of Upper Cretaceous age, and Neogene alkaline basalts. Chemical analyses of soil samples indicate significantly lower iodine abundances for all the soils studied (5–28 ppm) in comparison to the average abundance of iodine in analogous soils of other parts of the world (22–93 ppm). The concentration of iodine in soils developed over the same geologic formation decrease with increasing elevation. In certain cases, this decrease may reach up to 70%. Goiter is highly common throughout this region in Turkey. The results of this study suggest that the iodine deficiency of region’s soils may be a principal underlying cause for this area of Turkey being an endemic goiter region.     

Wave energy in surface layers for energy-based damage evaluation

Seismic wave energy in surface layers is calculated based on vertical array records at four sites during the 1995 Hyogo-ken Nambu earthquake by assuming vertical propagation of SH waves. The upward energy generally tends to decrease as it goes up from the base layer to the ground surface particularly in soft soil sites. Theoretical study on 1D multi-layers model to investigate the basic energy flow mechanism indicates that the energy at the ground surface can be smaller on softer soils due to high soil damping during strong shaking even if resonance effect is considered. A simple calculation for a shear-vibrating structure resting on foundation ground shows that induced strain in the structure is directly related to the energy or the energy flux of surface layers. Hence, a general perception that soft soil sites tend to suffer heavier damage than stiff sites should be explained not by greater incident energy but by other reasons such as degree of resonance. Furthermore, it is recommended that not only acceleration or velocity but also S-wave velocity should be specified at a layer where a design seismic motion is given, so that the seismic wave energy can clearly be quantified in seismic design practice.     

2006年甘肃文县5.0级地震灾害损失评估

2006年6月21日在甘肃省文县发生MS5.0地震,造成了建筑物破坏及人员伤亡。在震后开展的地震现场考察与震害评估工作中,将灾区分为2个评估子区,完成了29个点的震害抽样调查工作,根据地震灾害损失评估系统EDLES2.5的要求建立了有关数据库,做出了经济损失评估,并针对灾害特点给出了灾区恢复重建的建议。     

高分辨率浅层人工地震勘探探测隐伏断裂实例

利用高分辨率浅层地震勘探反射波法探测了福建某火电厂场址内的隐伏断裂。结果表明断裂显示清楚,为一走向NE40~55°,上断点埋深为11 m和31 m,断距2~4 m的正断层,为工程避让提供较可靠的依据。     

1879年甘肃武都南8级地震新史料

1985年在甘肃文县屯寨乡洋汤寨的天池庙的大樑上发现了一条新的关于1879年7月1日武都8级地震的新的历史记载。该记载表明武都8级地震在这里的地震烈度至少达到了Ⅹ度。