Olivine phenocrysts in some Cameroonian Basalts—implications for primary magma composition

Summary The chemical composition of olivine phenocrysts was determined for 13 basaltic samples taken from the central part of the Cameroon Volcanic line to estimate the compositions of the primary olivine phenocrysts and the primary magmas. The Mg/(Mg + Fe) ratios of the olivines attain 0.91, though many of the magnesian olivines are identified on a textural basis as xenocrysts from peridotite inclusions. Most magnesian olivine phenocrysts have Mg/(Mg + Fe) ratios of 0.87–0.88 and NiO contents of 0.32–0.35 wt %. The NiO versus Mg/(Mg + Fe) ratios of the olivines can be used to estimate the compositions of the primary phenocrysts in a range of Mg/(Mg + Fe) = 0.88–0.90. Assuming the Fe(3)/(total Fe) ratios of the magmas are 0.17–0.25, which is estimated from the Fe-Mg partitioning between plagioclase and groundmass, the compositions of the primary magmas were obtained from the Fe²⁺-Mg partition equilibrium with the primary olivine phenocrysts. The primary magmas of the Cameroonian basalts have 13.5 ± 4.0 wt MgO, which is similar to the compositions of basalts with highest MgO contents reported so far from the Cameroon volcanic line.

---

Olivin Kristalle in einigen Basalten aus Kamerun: Hinweise auf die Zusammensetzung des primitiven Magmas

Zusammenfassung Die chemische Zusammensetzung von Olivin Phenokristallen wurde in 13 Basalt-Proben, die vom Zentralteil .des Kamerun-Vulkangürtels stammen, bestimmt, um Hinweise auf die Zusammensetzung der primären Olivineinsprenglinge and des primären Magmas zu erlangen. Die Mg/(Mg + Fe) Verhältnisse der Olivine reichen bis 0.91, obwohl viefle dieser Mg-Olivine auf Grund textureller Kriterien als aus Peridotit-Einschlüssen stammende Xenokristalle zu identifizieren sind. Die Mg/(Mg + Fe) Verhältnsse der Hauptmasse der Olivin-Phenokristalle liegen im Bereich von 0.87 bis 0.88, die Ni0 Gehalte zwischen 0.32 und 0.35 Gew %. Die Ni0 gegen Mg/(Mg + Fe) Verhältnisse eignen sich zur Abschätzung der Zusammensetzung der primären Phenokristalle, solange die Mg/(Mg + Fe) Verhältnisse im Bereich von 0.88 bis 0.90 liegen. Die Zusammensetzung des Primärmagmas wurde mittels der Fe²⁺-Mg-Verteilung zwischen dem Magma und den sich mit dem Magma im Gleichgewicht befindlichen primären Olivinkristallen unter der Annahme eines Fe³⁺/Fe total Verhältnisses von 0.17–0.25, welches sich aus der Mg-Fe Verteilung zwischen Plagioklas und Grundmasse ergibt, bestimmt. Demnach ergibt sich für das primäre Magma der Kamerun Basalte ein MgO Gehalt von 13.5 + 4.0 Gew%. Dieser Wert ist mit der Zusammensetzung von Basalten mit höchsten MgO-Gehalten, wie sie bisher vom Kamerun-Vulkangürtel berichtet worden sind, vergleichbar.

---

---

With 6 Figures     

An interactive system to assist mineral identification in ore microscopy

An interactive computer system has been developed to assist the mineral identification in ore microscopy. The reference file of the system consists of optical, mechanical, and chemical properties of about 130 ore minerals. The properties are name, chemical formula, color, bireflectance, anisotropism, internal reflection, reflectance at wavelengths of 470, 546, 589, and 650 nm, and polishing hardness and micro-indentation hardness. All the properties except reflectance and microindentation hardness are qualitative or semi-qualitative. Most of the properties are given as characters relative to the more common minerals. This implies that most of the identification processes advance on the basis of the comparison between a subject mineral and coexisting minerals. For this reason, the system asks a user at first to input already identified mineral names. This is quite different from the mineral identification procedures used in petrographic microscopy. To reduce the number of possible minerals, the system presents a series of questions to a user, and the user selects any of the prepared answers according to his observation. The user can also choose any desired question independently of the sequence. The user is expected to be able to recognize some common minerals, such as pyrite, chalcopyrite, galena, and hematite, without the assistance of the system.     

The geochemical study of fluvio-lacustrine aquifers in the Kathmandu Basin (Nepal) and the implications for the mobilization of arsenic

The geochemical analyses of fluvial-lacustrine aquifer sediments of the Kathmandu Valley have been made as a step in assessing the environment for the mobilization of arsenic in groundwater. Elements measured by X-ray fluorescence (XRF) include 4 major oxides (Fe₂O₃, TiO₂, CaO, P₂O₅) and 14 trace elements (As, Pb, Zn, Cu, Ni, Cr, V, Sr, Y, Nb, Zr, Th, Sc and TS). Elution tests of 15 selected core samples were also carried out to determine the potential leaching of arsenic from the sediments. The XRF results show that average bulk concentrations of the major oxides and trace elements are similar to modern unconsolidated sediments and average upper continental crust. However, the abundance of elements varies with grain size, with higher concentrations in finer-size grades. Variations in elemental abundances within the basin are strongly controlled by sediment facies. The elution tests show that greater amounts of arsenic are generally eluted from the fine sediments, although the rates are variable. The results overall suggest that As concentrations in the bulk sediments are not a controlling factor for elevated As in the Kathmandu Basin groundwater, and the roles of other factors such as redox conditions and organic matter contents are likely to be more significant.     

Magnetic petrology of the 1991–1995 dacite lava of Unzen volcano,Japan: Degree of oxidation and implications for the growth of lava domes

To understand the oxidation state and process of oxidation of lava domes, we carried out magnetic petrological analyses of lava samples obtained from domes and block-and-ash-flow deposits associated with the 1991–1995 eruption of Unzen volcano, Japan. As a result, we recognize three different types of magnetic petrology, each related to deuteric high-temperature oxidation during initial cooling. Type A oxides are characterized by homogenous titanomagnetite and titanohematite, indicating a low oxidation state and high titanomagnetite concentrations. Type B oxides are weakly exsolved and contain titanohematite laths and rutile lenses, indicating a higher oxidation state. Type C oxides, which represent the highest oxidation state, are completely exsolved and composed of Ti-poor titanomagnetite, titanohematite, rutile, and pseudobrookite, indicating high hematite concentrations. Some grains in Types A and B show indications of reduction, which was related to interaction with volcanic gases subsequent to high-temperature oxidation. In terms of geological occurrence, the oxidation processes probably differed for endogenous and exogenous domes. Endogenous dome lavas are oxidized concentrically and are classified into the three types according to their location within the dome: samples from the surface are strongly oxidized and classified as Type C, while the inner part is unoxidized and classified as Type A. Exogenous dome lavas are unoxidized and assigned to Type A. Some samples show signs of reduction, which may have occurred around fumaroles. We propose that location within the dome and the process of dome growth are the factors that control oxidation.     

A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models

We developed a simple, single-layer urban canopy model, and comparedit to both multi-layer and slab models. Our single-layer model has thefollowing features: (a) It is a column model of energy and momentumexchange between an urban surface and the atmosphere, (b) it includesthe influence of street canyons, which are parameterized to representthe urban geometry, (c) it includes shadowing from buildings andreflection of radiation, and (d) it estimates both the surfacetemperatures of, and heat fluxes from, three surface types: roof, wall,and road. In the simulation of the single-layer model, the roof washottest during the daytime, but coolest from midnight to early morning.This is consistent with output from the multi-layer model and fieldobservations at a residential area on a clear, summer day. The diurnalvariation of the energy budget from the single-layer model agrees wellwith that from the multi-layer model. Our single-layer model'sperformance is nearly that of a multi-layer model for studyingmesoscale heat islands. Nevertheless, it is simply parameterized,and thus easily included in larger-scale atmospheric models. The slabmodel has the largest nighttime cooling rate of the three models. Toovercome this, it needs more adjustments than for the canopy models.     

Global synchroneity of a positive carbon isotope excursion at the Cenomanian/Turonian boundary: Validation by calcareous microfossil biostratigraphy of the Yezo Group, Hokkaido, Japan

Abstract Isotopic analyses of organic carbon from the mid-Cretaceous sequence in Hokkaido, Japan, revealed a 2‰ positive excursion of δ¹³C values at the biostratigraphically defined Cenomanian/Turonian (C/T) boundary recognized in the Yezo Group. The planktonic foraminiferal Whiteinella archaeocretacea Zone, which is known to bracket the Cenomanian/Turonian boundary elsewhere in the world, was recognized in the Oyubari area of central Hokkaido based on the distribution of commonly occurring planktonic foraminifera. In the Tappu area of northwestern Hokkaido, where diagnostic planktonic foraminifera are rare but calcareous nannoplankton occur commonly, the interval coeval with the W. archaeocretacea Zone can also be established by recognizing the conjoined last appearance levels of Corollithion kennedyi and Axopodorhabdus albianus, both calcareous nannoplankton species. Carbon isotope profiles exhibit a similar pattern with comparable peaks and troughs occurring in the same stratigraphic position in the sequences. A prominent, positive 2‰ shift of δ¹³C values, here called ‘δ¹³C spike’ occurs in the middle of the W. archaeocretacea Zone in the Oyubari area and just above the conjoined last appearances of the two above-mentioned nannoplankton taxa in the Tappu area. The Cenomanian/Turonian boundary can be drawn just above the peak position of the spike in both sections. The Rock Eval analyses and biomarker analyses of organic carbon indicate that organic carbon subjected to our isotope analyses is of terrestrial origin. Therefore, the observed 2%o shift should reflect changes in the isotopic composition of the atmospheric CO₂. A unique layer composed predominantly of sand-grain sized spumellarian Radiolaria is present immediately above the δ¹³C spike both in the Oyubari and Tappu areas, suggesting an increasing availability of both nutrients and silica in surface waters.     

The non-linear least-squares of condition equations

In this paper the author constructs general algorithms for the non-linear least squares of condition equations and shows the procedure of their application for the settlement of the problem of unfavorable condition equations in the adjustment of a quadrilateral.     

Gonadal histology and serum vitellogenin levels of bigeye tuna Thunnus obesus from the Northern Pacific Ocean--absence of endocrine disruption bio-indicators

Endocrine disrupting chemicals such as organochlorines have been detected in a large number of marine fish. Histological observation of the gonads, measurement of serum vitellogenin (VTG) level and of liver polychlorinated biphenyl (PCB) content were performed to evaluate the reproductive health and the contamination with endocrine disruptors in bigeye tuna Thunnus obesus, collected in the northern Pacific Ocean in 1999 and 2000. Abnormalities commonly found in species affected by endocrine disruptors such as the presence of oocytes in the testis or elevated serum VTG levels were not found in any of males examined. Both males and females had only small amounts of liver PCB content. The results suggest that currently there is little if any risk of organochlorine contamination or endocrine disruption of gonadal function in bigeye tuna from the northern Pacific Ocean. However, further studies are necessary to evaluate the health status of the open sea fishery resources.     

Wide-Field Camera for Gravitational Microlensing Survey: MOA-cam2

We have constructed a large, mosaic CCD camera called MOA-cam2 which has 4096 × 6144-pixelsto search for gravitational microlensing events. MOA-cam2 has three4096 × 2048-pixel SITe CCD chips, which have a very high quantum efficiency (nearly 80% in the wave region 500 to 800 nm),and three buttable sides. We have placed the threechips side by side with 100 m dead space. MOA-cam2 has been installed on the 61 cm Boller and Chivens telescope of the MOA collaboration at the Mt. John University Observatory (MJUO) in NewZealand since July 1998. The field coverage is 0.92° × 1.38° per exposure. The technical details of MOA-cam2 and the first images obtained with the Boller and Chivens telescope are presented. MOA-cam2 introduces a second phase of research on gravitational microlensing by the MOA collaboration.