Age and associated stress field of middle Miocene back-arc basalt magmatism in Northeast Japan

A large volume of middle Miocene basaltic rocks is widely distributed across the back-arc region of Northeast Japan, including around the Dewa Mountains. Petrological research has shown that basaltic rocks of the Aosawa Formation around the Dewa Mountains were generated as a result of the opening of the Sea of Japan. To determine the precise ages of the middle Miocene basaltic magmatism, we conducted U–Pb and fission-track (FT) dating of a rhyolite lava that constitutes the uppermost part of the Aosawa Formation. In addition, we estimated the paleostress field of the volcanism using data from a basaltic dike swarm in the same formation. The rhyolite lava yields a U–Pb age of 10.73 ±0.22 Ma (2σ) and a FT age of 10.6 ±1.6 Ma (2σ), and the paleostress analysis suggests a normal-faulting stress regime with a NW–SE-trending σ₃-axis, a relatively high stress ratio, and a relatively high magma pressure. Our results show that the late Aosawa magmatism occurred under NW–SE extensional stress and ended at ~ 11 Ma.     

Characteristics of evapotranspiration from a permafrost black spruce forest in interior Alaska

Here, the year 2011 characteristics of evapotranspiration and the energy budget of a black spruce forest underlain by permafrost in interior Alaska were explored. Energy balance was nearly closed during summer, and the mean value of the daily energy balance ratio (the ratio of turbulent energy fluxes to available energy) from June to August was 1.00, though a large energy balance deficit was observed in the spring. Such a deficit was explained partly by the energy consumed by snowmelt. Ground heat flux played an important role in the energy balance, explaining 26.5% of net radiation during summer. The mean daily evapotranspiration of this forest during summer was 1.37 mm day^?1 – considered typical for boreal forests. The annual evapotranspiration and sublimation yielded 207.3 mm year^?1, a value much smaller than the annual precipitation. Sublimation accounted for 8.8% (18.2 mm year^?1) of the annual evapotranspiration and sublimation; thus, the sublimation is not negligible in the annual water balance in boreal forests. The daytime average decoupling coefficient was very small, and the mean value was 0.05 during summer. Thus, evapotranspiration from this forest was mostly explained by the component from the dryness of the air, resulting from the aerodynamically rough surface of this forest.     

Experimental Study of the Applicability of the Remotely Positioned Laser Doppler Vibrometer to Rock-Block Stability Assessment

This paper examines a new method for evaluating the stability of rock blocks on slopes using a remotely positioned Laser Doppler Vibrometer (LDV). A series of experiments using physical models were conducted to evaluate the validity of this new method. Based on the experimental studies, the applicability of LDV was examined by comparing results with a conventional seismometer measurement. To examine the quantitative correlations between vibration properties and the stability of a rock block, the effects on the vibration properties of the size of the rock block, the initial block position, the slope incline, and the type of ground surface were studied. The experimental results showed that LDV measurements agreed with conventional seismometer measurements. There was also a good correlation between vibration properties and rock-block stability. On the other hand, it was found that for a boulder on tightly compacted ground, the application of block stability assessment by tonometry was difficult when measuring microtremors or sloppy vibration due to nearby vehicle traffic. Furthermore, numerical analysis of the slope model was carried out to examine the validity of the model experiment and application of the suggested technique. The results of the analysis demonstrated that the suggested technique was effective for application to stability monitoring of a block and evaluation of the effect of stability measures.     

Seasonal temperature responses to land-use change in the western United States

In the western United States, more than 79 000 km² has been converted to irrigated agriculture and urban areas. These changes have the potential to alter surface temperature by modifying the energy budget at the land–atmosphere interface. This study reports the seasonally varying temperature responses of four regional climate models (RCMs) – RSM, RegCM3, MM5-CLM3, and DRCM – to conversion of potential natural vegetation to modern land-cover and land-use over a 1-year period. Three of the RCMs supplemented soil moisture, producing large decreases in the August mean (− 1.4 to − 3.1 °C) and maximum (− 2.9 to − 6.1 °C) 2-m air temperatures where natural vegetation was converted to irrigated agriculture. Conversion to irrigated agriculture also resulted in large increases in relative humidity (9% to 36% absolute change). Modeled changes in the August minimum 2-m air temperature were not as pronounced or consistent across the models. Converting natural vegetation to urban land-cover produced less pronounced temperature effects in all models, with the magnitude of the effect dependent upon the preexisting vegetation type and urban parameterizations. Overall, the RCM results indicate that the temperature impacts of land-use change are most pronounced during the summer months, when surface heating is strongest and differences in surface soil moisture between irrigated land and natural vegetation are largest.     

Zircon U–Pb ages of plutonic rocks in the southern Abukuma Mountains: Implications for Cretaceous geotectonic evolution of the Abukuma Belt

Plutonic rocks in the southern Abukuma Mountains include gabbro and diorite, fine‐grained diorite, hornblende–biotite granodiorite (Ishikawa, Samegawa, main part of Miyamoto and Tabito, Kamikimita and Irishiken Plutons), biotite granodiorite (the main part of Hanawa Pluton and the Torisone Pluton), medium‐ to coarse‐grained biotite granodiorite and leucogranite, based on the lithologies and geological relations. Zircon U–Pb ages of gabbroic rocks are 112.4 ±1.0 Ma (hornblende gabbro, Miyamoto Pluton), 109.0 ±1.1 Ma (hornblende gabbro, the Hanawa Pluton), 102.7 ±0.8 Ma (gabbronorite, Tabito Pluton) and 101.0 ±0.6 Ma (fine‐grained diorite). As for the hornblende–biotite granodiorite, zircon U–Pb ages are 104.2 ±0.7 Ma (Ishikawa Pluton), 112.6 ±1.0 Ma (Tabito Pluton), 105.2 ±0.8 Ma (Kamikimita Pluton) and 105.3±0.8 Ma (Irishiken Pluton). Also for the medium‐ to fine‐grained biotite granodiorite, zircon U–Pb ages are 106.5±0.9 Ma (Miyamoto Pluton), 105.1 ±1.0 Ma (Hanawa Pluton) and the medium‐ to coarse‐grained biotite granodiorite has zircon U–Pb age of 104.5 ±0.8 Ma. In the case of the leucogranite, U–Pb age of zircon is 100.6 ±0.9 Ma. These data indicate that the intrusion ages of gabbroic rocks and surrounding granitic rocks ranges from 113 to 101 Ma. Furthermore, K–Ar ages of biotite and or hornblende in the same rock samples were dated. Accordingly, it is clear that these rocks cooled down rapidly to 300 °C (Ar blocking temperature of biotite for K–Ar system) after their intrusion. These chronological data suggest that the Abukuma plutonic rocks in the southern Abukuma Mountains region uplifted rapidly around 107 to 100 Ma after their intrusion.     

Detrital zircon multi‐chronology,provenance, and low‐grade metamorphism of the Cretaceous Shimanto accretionary complex,eastern Shikoku,Southwest Japan: Tectonic evolution in response to igneous activity within a subduction zone

Detrital zircon multi‐chronology combined with provenance and low‐grade metamorphism analyses enables the reinterpretation of the tectonic evolution of the Cretaceous Shimanto accretionary complex in Southwest Japan. Detrital zircon U–Pb ages and provenance analysis defines the depositional age of trench‐fill turbidites associated with igneous activity in provenance. Periods of low igneous activity are recorded by youngest single grain zircon U–Pb ages (YSG) that approximate or are older than the depositional ages obtained from radiolarian fossil‐bearing mudstone. Periods of intensive igneous activity recorded by youngest cluster U–Pb ages (YC1σ) that correspond to the younger limits of radiolarian ages. The YC1σ U–Pb ages obtained from sandstones within mélange units provide more accurate younger depositional ages than radiolarian ages derived from mudstone. Determining true depositional ages requires a combination of fossil data, detrital zircon ages, and provenance information. Fission‐track ages using zircons estimated YC1σ U–Pb ages are useful for assessing depositional and annealing ages for the low‐grade metamorphosed accretionary complex. These new dating presented here indicates the following tectonic history of the accretionary wedge. Evolution of the Shimanto accretionary complex from the Albian to the Turonian was caused by the subduction of the Izanagi plate, a process that supplied sediments via the erosion of Permian and Triassic to Early Jurassic granitic rocks and the eruption of minor amounts of Early Cretaceous intermediate volcanic rocks. The complex subsequently underwent intensive igneous activity from the Coniacian to the early Paleocene as a result of the subduction of a hot and young oceanic slab, such as the Kula–Pacific plate. Finally, the major out‐of‐sequence thrusts of the Fukase Fault and the Aki Tectonic Line formed after the middle Eocene, and this reactivation of the Shimanto accretionary complex as a result of the subduction of the Pacific plate.     

Ocean bottom tiltmeter with acoustic data retrieval system implanted by a submersible

Sensitive Ocean Bottom Implanted Tiltmeters (OBITs) with a sophisticated data retrieval system have been developed in order to observe directly the subduction of oceanic lithosphere. The OBIT is the first long-term geophysical instrument which was designed to be deployed by a manned deep-sea submersible. When the OBIT is put on oceanic lithosphere which is bending and is about to subduct under a deep sea trench, the OBIT records the subduction by observing the tilt of the surface of the lithosphere. The OBIT system has a sensitivity of 10^-8 radian, which is enough to detect the ongoing subduction in months or years. The OBIT may give an answer to the question whether there are fluctuations in the subduction rate.Two OBITs were successfully deployed on a seaward slope of the Kuril Trench by the newly built French deep submersible, Nautile. The OBITs were installed on the northwest shoulder of Erimo seamount, at a depth of 3930 m, in the Kuril Trench. In order to attain stable long-term observations of crustal deformations, the sensing unit was cemented onto bare rock by mortar. We have not yet had an opportunity to recover the data.The life of the instruments is expected to be more than five years. An acoustic data transmission system has been developed for the OBIT data recovery. The stored data can be retrieved at any moment during the observation period, with no need to retrieve the instruments nor to interrupt the observation, by use of the acoustic system. The acoustic system has a high data transmission rate as well as extremely low power consumption. This will be the first long-term crustal deformation measurement on the sea floor.     

Estimation methods for monthly humidity from dynamical downscaling data for quantitative assessments of climate change impacts

Methods are proposed to estimate the monthly relative humidity and wet bulb temperature based on observations from a dynamical downscaling coupled general circulation model with a regional climate model (RCM) for a quantitative assessment of climate change impacts. The water vapor pressure estimation model developed was a regression model with a monthly saturated water vapor pressure that used minimum air temperature as a variable. The monthly minimum air temperature correction model for RCM bias was developed by stepwise multiple regression analysis using the difference in monthly minimum air temperatures between observations and RCM output as a dependent variable and geographic factors as independent variables. The wet bulb temperature was estimated using the estimated water vapor pressure, air temperature, and atmospheric pressure at ground level both corrected for RCM bias. Root mean square errors of the data decreased considerably in August.