New buoy observation system for tsunami and crustal deformation

We have developed a new system for real-time observation of tsunamis and crustal deformation using a seafloor pressure sensor, an array of seafloor transponders and a Precise Point Positioning (PPP ) system on a buoy. The seafloor pressure sensor and the PPP system detect tsunamis, and the pressure sensor and the transponder array measure crustal deformation. The system is designed to be capable of detecting tsunami and vertical crustal deformation of ±8 m with a resolution of less than 5 mm. A noteworthy innovation in our system is its resistance to disturbance by strong ocean currents. Seismogenic zones near Japan lie in areas of strong currents like the Kuroshio, which reaches speeds of approximately 5.5 kt (2.8 m/s) around the Nankai Trough. Our techniques include slack mooring and new acoustic transmission methods using double pulses for sending tsunami data. The slack ratio can be specified for the environment of the deployment location. We can adjust slack ratios, rope lengths, anchor weights and buoy sizes to control the ability of the buoy system to maintain freeboard. The measured pressure data is converted to time difference of a double pulse and this simple method is effective to save battery to transmit data. The time difference of the double pulse has error due to move of the buoy and fluctuation of the seawater environment. We set a wire-end station 1,000 m beneath the buoy to minimize the error. The crustal deformation data is measured by acoustic ranging between the buoy and six transponders on the seafloor. All pressure and crustal deformation data are sent to land station in real-time using iridium communication.     

Does freshening of surface water enhance heterotrophic prokaryote production in the western Arctic? Empirical evidence from the Canada Basin during September 2009

This study examined possible environmental factors that affect prokaryote variables in surface waters (upper 100 m of water column) in the Canada Basin, western Arctic Ocean. We collected data on prokaryote abundance and heterotrophic production ([³H]leucine incorporation) at eight stations deployed along a slope-to-offshore transect during September 2009. Prokaryote production and growth tended to increase with increasing chlorophyll a (Chl. a) and temperature and with decreasing salinity. The combination of Chl. a, temperature, and salinity accounted for a large fraction (74%) of the variability in prokaryote production, with the highest contribution made by Chl. a (r ² = 0.56), followed by salinity (r ² = 0.14) and temperature (r ² = 0.03). Similarly, the variability in prokaryote growth rate was largely accounted for by the combination of the three environmental variables (overall r ² of 0.64), with Chl. a making the largest contribution to variability (r ² = 0.33), followed by salinity (r ² = 0.27) and temperature (r ² = 0.05). These data are consistent with the notion that organic matter supply associated with freshwater inputs to surface layers can result in enhanced prokaryote production and growth in the Canada Basin. Our results provide insights into the regulation of the microbial loop in the Canada Basin where freshening has been proceeding rapidly due to increasing river discharge and sea-ice melting.     

Geochemistry and petrogenesis of carbonatites from South Nam Xe,Lai Chau area,northwest Vietnam

This paper presents a study of the petrography, mineral chemistry, geochemistry, and Sr–Nd–Pb–C–O isotope systematics of carbonatite dykes and associated rocks from the northeastern part of the Song Da intracontinental rift in South Nam Xe (northwest Vietnam) aimed at constraining the origin of the carbonatite magmas. The carbonatites are characterized by SiO₂ < 12.18 wt.% and by wide ranges in FeO, MgO and CaO content that define them as calciocarbonatite and ferrocarbonatite. On U–Th–Pb isochron diagrams, whole rocks and mineral separates from the ferrocarbonatites form linear arrays corresponding to ages of 30.2–31.6 Ma (Rupelian, Oligocene). The South Nam Xe carbonatites are extremely enriched in Sr, Ba, and light rare earth elements (LREE), and depleted in high field strength elements (HFSE) (e.g. Ti, Nb, Ta, Zr and Hf). The age–corrected Sr–Nd–Pb isotope ratios and C isotope data are relatively uniform (⁸⁷Sr/⁸⁶Sr_(t) = 0.708193–0.708349; ¹⁴³Nd/¹⁴⁴Nd_(t) = 0.512250–0.512267; ε_Nd(t) = ?6.46 to ?6.80; ²⁰⁶Pb/²⁰⁴Pb_(t) = 18.26–18.79; ²⁰⁷Pb/²⁰⁴Pb_(t) = 15.62–15.64; ²⁰⁸Pb/²⁰⁴Pb_(t) = 38.80–39.38; δ¹³C_V-PDB = –2.7?‰ to ?4.1?‰). These isotopic compositions indicate source contamination that occurred before the production of the carbonatite magmas, and did not change noticeably during or after emplacement. The variation in oxygen isotopes is consistent with the change in mineral compositions and trace element abundances: the lower δ¹⁸O values (9.1–11.0?‰) coupled with Sr-rich, Mn-poor calcite, and igneous textures such as triple junctions among calcite grain boundaries, define a magmatic origin. However, the elevated δ¹⁸O values of the ferrocarbonatites (12.0–13.3?‰) coupled with a volatile-bearing mineral assemblages (including REE fluorcarbonates, sulfates, sulfides and fluorite) may be due to interaction with meteoric water during low-temperature alteration. High δ¹³C values and Sr–Pb ratios, and low Rb/Sr (0.00014–0.00301), Sm/Nd (0.089–0.141) and ¹⁴³Nd/¹⁴⁴Nd ratios, coupled with very high Sr-Nd concentrations, suggest the involvement of an enriched mantle component, which probably resulted from metasomatism due to the migration of subducted material. Because of the lack of tectonic data and the limited number of samples studied, this conclusion is still ambiguous and requires further study.     

An exact solution to determination of an open orbit

We present an exact solution of the equations for orbit determination of a two body system in a hyperbolic or parabolic motion. In solving this problem, we extend the method employed by Asada, Akasaka and Kasai (AAK) for a binary system in an elliptic orbit. The solutions applicable to each of elliptic, hyperbolic and parabolic orbits are obtained by the new approach, and they are all expressed in an explicit form, remarkably, only in terms of elementary functions. We show also that the solutions for an open orbit are recovered by making a suitable transformation of the AAK solution for an elliptic case.     

Changes of environments and human activity at the Sannai-Maruyama ruins in Japan during the mid-Holocene Hypsithermal climatic interval

Sannai-Maruyama is one of the most famous and best-researched mid-Holocene (mid-Jomon) archaeological sites in Japan, because of a large community of people for a long period. Archaeological studies have shown that the Jomon people inhabi1ted the Sannai-Maruyama site from 5.9 to 4.2 ± 0.1 cal kyr BP However, a continuous record of the terrestrial and marine environments around the site has not been available. Core KT05-7 PC-02, was recovered from Mutsu Bay, only 20 km from the site, for the reconstruction of high-resolution time series of environmental records, including sea surface temperature (SST). C₃₇ alkenone SSTs showed clear fluctuations, with four periods of high (8.4–7.9, 7.0–5.9, 5.1–4.1, and 2.3–1.4 cal kyr BP) and four of low (?8.4, 7.9–7.0, 5.9–5.1, and 4.1–2.3 cal kyr BP) SST. Thus, each SST cycle lasted 1.0–2.0 kyr, and the amplitude of fluctuation was about 1.5–2.0 °C. Total organic carbon (TOC) and C₃₇ alkenone contents, and the TOC/total nitrogen ratio indicate that marine biogenic production was low before 7.0 cal kyr BP, but was clearly increased between 5.9 and 4.0 cal kyr BP, because of stronger vertical mixing. During the period when the community at the site prospered (between 5.9 and 4.2 ± 0.1 cal kyr BP), the terrestrial climate was relatively warm. The high relative abundance of pollen of both Castanea and Quercus subgen. Cyclobalanopsis supports the interpretation that the local climate was optimal for human habitation. Between 5.9 and 5.1 cal kyr BP, in spite of warm terrestrial climates, the C₃₇ alkenone SST was low; this apparent discrepancy may be attributed to the water column structure in the Tsugaru Strait, which differed from the modern condition. The evidence suggests that at about 5.9 cal kyr B.P, high productivity of marine resources such as fish and shellfish and a warm terrestrial climate led to the establishment of a human community at the Sannai-Maruyama site. Then, at about 4.1 ± 0.1 cal kyr BP, abrupt marine and terrestrial cooling, indicated by a decrease of about 2 °C in the C₃₇ alkenone SST and an increase in the pollen of taxa of cooler climates, led to a reduced terrestrial food supply, causing the people to abandon the site. The timing of the abandonment is consistent with the timing (around 4.0–4.3 cal kyr BP) of the decline of civilizations in north Mesopotamia and along the Yangtze River. These findings suggest that a temperature rise of ～2 °C in this century as a result of global warming could have a great impact on the human community and especially on agriculture, despite the advances of contemporary society.     

Causes of large-scale landslides in the Lesser Himalaya of central Nepal

Geologically and tectonically active Himalayan Range is characterized by highly elevated mountains and deep river valleys. Because of steep mountain slopes, and dynamic geological conditions, large-scale landslides are very common in Lesser and Higher Himalayan zones of Nepal Himalaya. Slopes along the major highways of central Nepal namely Prithvi Highway, Narayangadh-Mugling Road and Tribhuvan Highway are considered in this study of large-scale landslides. Geologically, the highways in consideration pass through crushed and jointed Kathmandu Nappe affected by numerous faults and folds. The relict large-scale landslides have been contributing to debris flows and slides along the highways. Most of the slope failures are mainly bechanced in geological formations consisting phyllite, schist and gneiss. Laboratory test on the soil samples collected from the failure zones and field investigation suggested significant hydrothermal alteration in the area. The substantial hydrothermal alteration in the Lesser Himalaya during advancement of the Main Central Thrust (MCT) and thereby clay mineralization in sliding zones of large-scale landslide are the main causes of large-scale landslides in the highways of central Nepal. This research also suggests that large-scale landslides are the major cause of slope failure during monsoon in the Lesser Himalaya of Nepal. Similarly, hydrothermal alteration is also significant in failure zone of the large-scale landslides. For the sustainable road maintenance in Nepal, it is of utmost importance to study the nature of sliding zones of large-scale landslides along the highways and their role to cause debris flows and slides during monsoon period.     

Application and evaluation of ground surface pre-grouting reinforcement for 800-m-deep underground opening through large fault zones

Faults are complex geological conditions that are commonly encountered during underground excavation. Many support schemes, such as using a single pilot heading method and 30-m-long borehole pre-grouting, have been implemented during the pilot excavation of an 800-m-deep underground opening that passes through large fault zones in East China. However, various geo-hazards, including groundwater inrush, debris flow, and roof collapse, are still occurring, which seriously threaten tunneling safety. To eliminate the geo-hazards and ensure tunneling safety, ground surface pre-grouting (GSPG) was proposed and implemented for the first time to reinforce the regional engineering rock mass for this proposed 800-m-deep underground opening passing through large fault zones. The minimum grouting pressure of GSPG at a depth of 800 m below the surface is put forward based on hydraulic fracturing theory, providing valuable guidance for GSPG engineering practice. Engineering practice demonstrates that GSPG eliminates geo-hazards, improves the objective rock mass stability, and ensures tunneling safety. Field measurements indicate that the displacement velocity of the surrounding rock shows an obvious fluctuation response under the influence of GSPG, and the impact of GSPG on the stability of the 800-m-deep underground opening that has been excavated dramatically decreases as the distance from the grouting borehole increases. Moreover, there is a strong negative exponential correlation between the maximum velocity of deformations and the distance from the grouting borehole. In addition, the safe distance underground during GSPG is greater than 137 m.     

Distribution and stoichiometry of Al,Mn, Fe,Co, Ni,Cu, Zn,Cd, and Pb in seawater around the Juan de Fuca Ridge

A central theme of the ongoing GEOTRACES program is to improve the understanding of processes occurring at ocean interfaces with continents, sediments, and ocean crust. In this context, we studied the distributions of Al, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb around the Juan de Fuca Ridge (JdFR) in total dissolvable (td), dissolved (d), and labile particulate (lp) fractions, which represent a fraction in unfiltered samples, filtered samples through an AcroPak capsule filter, and the difference between td and d, respectively. Al and Fe were dominated by lp-species, while Ni, Zn, and Cd were dominated by d-species with undetectable amounts of lp-species. Major findings in this study are as follows: (1) The continental margin (CM) provided large sources of Al, Mn, Fe, and Co from the surface to ~2000 m in depth. The supply from CM caused high surface concentrations of dMn and dCo, a subsurface (100–300 m depth) maximum of dCo, and intermediate (500–2000 m depth) maxima of lpAl and lpFe. The supply of dFe from CM was ~10 times that from the high-temperature hydrothermal activity at station BD21, which is located at ~3 km from the Middle Valley venting site and ~ 200 km from Vancouver Island. (2) DPb was maximum at the top layer of North Pacific Intermediate Water, probably owing to isopycnal transport of anthropogenic Pb via advection of subducted surface waters. Although dCo and dPb had different sources in the upper water, they showed a strong linearity below 300 m (r ² = 0.95, n = 38), indicating concurrent scavenging. (3) A high-temperature hydrothermal plume occurred at a depth of 2300 m at BD21, accounting for maxima of dAl, dMn, dFe, lpCu, and lpPb and a minimum of dCu. (4) Strong bottom maxima of lpAl, lpMn, lpFe, lpCo, and lpPb occurred above the abyssal plain at the western foot of the JdFR, indicating resuspension of sediments. However, bottom maxima of d-species were apparent only for dAl and dCu.     

Zircon sensitive high mass-resolution ion microprobe U–Pb and fission-track ages for gabbros and sheeted dykes of the Taitao ophiolite, Southern Chile, and their tectonic implications

Abstract   The Late Miocene–Pliocene Taitao ophiolite is composed of a complete sequence of classic oceanic lithosphere and is exposed approximately 50 km southeast of the Chile triple junction, where the Chile Ridge subducts beneath the South American Plate. Gabbros and ultramafic rocks are folded into a complex pattern, but only evidence for block rotation has been reported in the overriding sheeted dyke complex. In the present study, sensitive high mass-resolution ion microprobe U–Pb and fission-track dating methods were applied to zircon crystals separated from gabbros and sheeted dykes. Two sets of radiometric ages of gabbros range between 5.9 ± 0.4 and 5.6 ± 0.1 Ma. These ages coincide within their error ranges and imply rapid intrusion and cooling of gabbros. The U–Pb age of a dacite dyke intruded into the sheeted dyke complex was determined to be 5.2 ± 0.2 Ma. These data indicate that the magmas of the Taitao ophiolite were formed during the 6 Ma Chile Ridge collision event and emplaced in a shorter period than previously thought. A short segment of the Chile Mid-oceanic Ridge must have been emplaced during the 6 Ma event.