Complex impact assessment of coastal development in the United Arab Emirates using GIS: a case study of Wurayah Biosphere Reserve

Wadi Wurayah area is one of the major wadis originating and running on the Oman Mountains and drains into the Oman Gulf. These wadis in general and Wadi Wurayah in particular are characterized with a rich diversity of rare and mountainous and freshwater habitats and species. These wadis contain unequal, representative, and sensitive areas of the dry lands ecosystem with natural, outstanding landscapes and cultural heritage, while the socioeconomic situation indicates that it has enough socioeconomic infrastructures to develop new alternatives ecologically and economically sustainable. As most of the United Arab Emirates and the region, the study area is undergoing dramatic changes linked to economic diversification and promotion of tourism. Established under the UNESCO’s Man and the Biosphere Program, Wurayah Biosphere Reserve represents protected areas intended to demonstrate well-balanced relationship between conservation of biodiversity and an appropriate local development. The main objectives of this study are to develop an environmental information system to understand the dynamics of human activities associated to land use in the study area, highlight the threats to the environment, educate people about the basic environmental issues and positive traditional practices, and promote tourism. Based on the gained results, the concept of biosphere reserve as a model is to implement ideas of sustainable land use in practice.     

High-resolution facies and porosity models of the upper Jurassic Arab-D carbonate reservoir using an outcrop analogue, central Saudi Arabia

Subsurface models of hydrocarbon reservoirs are coarse and of low resolution when compared with the actual geologic characteristics. Therefore, the understanding of the three-dimensional architecture of reservoir units is often incomplete. Outcrop analogues are commonly used to understand the spatial continuity of reservoir units. In this study, a Late Jurassic outcrop analogue for the Arab-D reservoir of central Saudi Arabia was used to build a high-resolution model that captures fine geologic details. Subsurface reservoir lithofacies were matched with those from the studied outcrop, and porosity values derived from published core and well log data from the Ain Dar, Uthmanyah, and Shudgum areas of the Ghawar Field, eastern Saudi Arabia, were then applied to the equivalent lithofacies in the outcrop. Maximum, minimum, and average subsurface porosity for each lithofacies were distributed in the facies model using a geostatistical algorithm to produce nine porosity models for the field data. Several realisations were run to visualise the variability in each model and to quantitatively measure the uncertainty associated with the models. The results indicated that potential reservoir zones were associated with grainstone, packstone, and some wackestone layers. Semivariogram analysis of the lithofacies showed good continuity in the N-S direction and less continuity in the E-W direction. The high-resolution lithofacies models detected permeability barriers and isolated low porosity bodies within the potential reservoir zones. This model revealed the porosity distribution in areas smaller than one cell in the subsurface model and highlighted the uncertainty associated with several aspects of the model.     

A Parametric Study on Stability of Open Excavations in Alluvial Soils of Lahore District, Pakistan

Rapid urbanization and expansion of metropolitans in the developing world is pressing the need of tall structures with multiple basements. In several such projects, open land is available around excavation site and unsupported deep excavations by maintaining appropriate side slopes offer economical solution. In this research, subsoil stratigraphy of Lahore district was established to be comprising of a top clay stratum 1.5–8 m thick, followed by a sand layer. Considering subsoil data from several geotechnical investigation reports, the effect of four key parameters viz., cohesion of clay layer, friction angle of sand layer, thickness of clay layer at the top and slope inclination of underlying sand layer on safety factor of open excavations was studied. Six hundred twenty-five slope stability analyses were conducted by considering different geometries and soil properties. Based on the results of these analyses, a regression model was suggested to estimate safety factor of open excavations in similar stratigraphy which would be useful in feasibility studies and preliminary design of deep excavations. It was established that the clay layer cohesion was the most dominant contributor to safety factor.     

A family of well behaved charge analogues of Durgapal’s perfect fluid exact solution in general relativity

This paper presents a new family of interior solutions of Einstein–Maxwell field equations in general relativity for a static spherically symmetric distribution of a charged perfect fluid with a particular form of charge distribution. This solution gives us wide range of parameter, K, for which the solution is well behaved hence, suitable for modeling of superdense star. For this solution the gravitational mass of a star is maximized with all degree of suitability by assuming the surface density equal to normal nuclear density, ρ _nm=2.5×10¹⁷ kg?m^?3. By this model we obtain the mass of the Crab pulsar, M _Crab, 1.36M _⊙ and radius 13.21 km, constraining the moment of inertia >?1.61×10³⁸ kg?m² for the conservative estimate of Crab nebula mass 2M _⊙. And M _Crab=1.96M _⊙ with radius R _Crab=14.38 km constraining the moment of inertia >?3.04×10³⁸ kg?m² for the newest estimate of Crab nebula mass, 4.6M _⊙. These results are quite well in agreement with the possible values of mass and radius of Crab pulsar. Besides this, our model yields moments of inertia for PSR J0737-3039A and PSR J0737-3039B, I _A =1.4285×10³⁸ kg?m² and I _B =1.3647×10³⁸ kg?m² respectively. It has been observed that under well behaved conditions this class of solutions gives us the overall maximum gravitational mass of super dense object, M _G(max)=4.7487M _⊙ with radius $R_{M_{\max}}=15.24~\mathrm{km}$ , surface redshift 0.9878, charge 7.47×10²⁰ C, and central density 4.31ρ _nm.     

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000     

Distribution of Boron in Some Egyptian Aquatic Environments

Concentrations of boron in seawater (from four regions along the Alexandria coastline, subjected to land disposal), brackish water (Lake Edku) and drains water (e.g. El-Umum Drain) were determined during the period from February to August 2000. Boron was determined spectrophotometrically by a modified curcumin method. For Lake Edku, boron concentration fluctuated between 0.023 and 0.105 mmol/l. There are several factors that affect the concentration of B in the Lake water: (a) effect of the drainage water via El-Khairy and Barsiek Drains, (b) utilization of boron by hydrophytes, and (c) water exchange through the sea-lake connection. It may be concluded that the level of boron in the Lake water cannot be considered a substantial hazard to the Lake organisms. Boron concentration varied from 0.392 to 0.522 mmol/l in seawater samples and from 0.141 to 0.458 mmol/l in the sites where the water from the drains (El-Umum Drain and El-Noubaria Canal) mixed with the seawater. The broader variation of boron (mmol/l)/salinity ratios for seawater samples (0.0106–0.0138) may be due to that the samples were collected from the upper seawater layers, where contributions from land run-off, atmospheric precipitation and differences in the biota affect the concentration. This revised version was published online in July 2006 with corrections to the Cover Date.     

Assessing desertification by using soil indices

Desertification generally refers to land degradation in arid, semiarid, and dry semi-humid climatic zones. It involves five principal processes: vegetation degradation, water erosion, wind erosion, salinization and waterlogging, and soil crusting and compaction. The aim of this study is assessing desertification using soil criteria. For this purpose, nine indices including sodium absorption ratio (SAR), soil gypsum percentage, soil texture, the content of HCO₃ ^?, the percentage of the organic matter, electrical conductivity (EC), pH, the content of the soil sodium, and chloride were used. The soil samples were taken in the north of Zayandeh-Rood River in Isfahan province of Iran, using soil data randomly sampled in a depth of 0–20 cm. After assessing the normality of the samples using Kolmogorov-Smirnov test, indices were imported into GIS environment and interpolated with IDW and normal and discrete kriging methods for delineating soil characteristics maps based on MEDALUS model. In this model, the data were firstly changed from 100 to 200. Thus 100 and 200 are estimated as the best and worst quality, respectively. Then the final map of soil criteria has been created by geometric mean of its indicators. The results showed that the maximum area is related to the medium class of desertification and is equal to 44,746 ha. The areas of severe and very severe classes of desertification are equal to 30,949 and 351 ha, respectively. The results also revealed that the indices of the organic matter and soil gypsum percentage are the most influential indices which affect desertification phenomenon.     

Evidence for Holocene environmental change from C/N ratios, and δ13C and δ15N values in Swan Lake sediments, western Sand Hills, Nebraska

Profiles of percent carbon and nitrogen, carbon/nitrogen (C/N) ratios and stable carbon (¹³C), and nitrogen (¹⁵N) isotopic ratios in organic matter from an 11.6 m core were used to reconstruct environments of deposition in the Swan Lake basin during the past 5300 YBP. The upper 6.5 m consisted of gyttja containing variable amounts of reddish brown-colored fine organic matter and calcium carbonate. It was followed by a 0.5 m sandy silt, which was followed by a 3.6 m reduced layer characterized by large quantities of black organic plant remains, sapropel, and then by another sapropel layer consisting mainly of well-sorted sapropelic sand with relatively low organic matter content. The C- and N-contents in the organic matter in the sediment profile ranged from 0.5 to 23% and from 0.02 to 2%, respectively. Carbon content were positively correlated to both N and clay content while carbon content was negatively correlated to sand content. Two major environmental phases in Swan Lake were apparent from large differences in the C and N data of the sediment organic matter. These include the sapropel (marsh) stage that stretched from approximately 5330 to 3930 YBP, and the following gyttja (open water stage). During the sapropel marsh plants identified in a previous pollen study as cattails and sedges proliferated and produced copious amounts of well-preserved organic matter. C/N ratios, ¹³C values, and ¹⁵N values in the sapropel were significantly different from those that characterized organic matter in the gyttja. During the gyttja ¹³C values indicated that deep primary producers have dominated lake biomass. By utilizing bicarbonate as their C-source, the accumulating biomass became relatively enriched ¹³C values. The presence of high sediment CaCO₃ contents indicated more alkaline and deeper water conditions prevailed during the gyttja. Further refinement of the data suggested that each major phase initially contained an identifiable transition stage. During the sapropelic (initial marsh stage) which occurred before 5330 YBP, sand content gradually decreased as organic matter increased. As reflected by high C/N ratios and slightly enriched ¹³C values, these sands appear to have contained sufficient permeability to promote partial mineralization of accumulated organic-N containing compounds. A short initial gyttja transition period from about 3930–3830 YBP occurred in which the sediment silt content was anomalously high relative that measured in the surrounding layers. The silt content suggests that this turbid transition layer can not be completely explained by sediment mixing via bioturbation. The silts appeared to have been associated with the sharp climate change that resulted in higher water-table conditions during the gyttja stage.     

Spatially-Weighted Factor Analysis for Extraction of Source-Oriented Mineralization Feature in 3D Coordinates of Surface Geochemical Signal

Natural Resources Research - This contribution proposes a spatially weighted factor analysis (SWFA) to recognize effectively the underlying mineralization-related feature(s) in geochemical signals....