Grain-size end-members and environmentally sensitive grain-size components: A comparative study in the mud shelf depocenters off southern Brazil

The current study aims to do a comparative analysis of the results obtained with two End-Member(EM)grain-size modeling techniques(AnalySize and BasEMMA)and the Environmental Sensitive Grain-Size(ESGS)modeling for sediment samples collected in the mudbelts of the southern Brazilian shelf.The methods were compared using grain-size data from the south Brazilian shelf,and the results are discussed here.It is the first time that the concept of ESGS,in its present form,is utilized outside China.The results show that despite its relative ease of use,the ESGS is not fully comparable to the EM analyses,and only two grain-size ESGS classes were recognized as analogous to EMs.The comparison of the AnalySize and BasEMMA procedures also revealed significant differences between the techniques.A comparative analysis between the two EM techniques revealed advantages in the BasEMMA,especially in the better correlation of the end-members with the original grain size distribution.The analysis of the geographical distribution of the EM abundances allowed point sources of sandy populations to be recognized as well as the contribution of the Rio de la Plata as a source of silty sediments to be inferred.     

New insights into the age and formation of the Ankarokaroka lavaka and its associated sandy cover (NW Madagascar,Ankarafantsika natural reserve)

Lavaka represent a typical erosional landform in Madagascar. The chronology of their formation remains, however, under discussion. Our research focuses on the Ankarokaroka lavaka, a spectacular landform located in NW Madagascar (Ankarafantsika natural reserve), which is characterized by the presence of sandy units of regional extension at its top. The two main units correspond to white and red sands, and are closely associated with specific vegetations (dry dense forest for the white sands, savannah grasslands for the red sands). We applied a geochronological approach based on Optically Stimulated Luminescence (for the coversands) associated with radiocarbon dating performed on archaeological remains found at the contact between the sands and the lavaka. The combination of this approach with field work and sedimentological analyses makes it possible to show that the sands experienced a complex history, both in terms of sedimentation and post‐sedimentary pedogenesis (podzolization of the white sands, rubefaction of the red sands). The numerical ages furthermore indicate that the Ankarokaroka lavaka formed between 18.5 ± 2.3 ka ago and the 14th century AD. The present study demonstrates that this lavaka has a climatic origin, and highlights the potential of OSL to date sediments associated with Madagascar lavaka. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of the Santa Catarina aquifer system (Mexico Basin) using magnetotelluric soundings

A tensor magnetotelluric test survey was carried out in the region of Santa Catarina, located in the Chalco sub-basin of the Mexico Basin. The objective was to define the stratification at depth with an emphasis on the geometry of the main aquifer of that region which is partially known from DC resistivity soundings and drilling. High-quality magnetotelluric soundings could be recorded in the immediate vicinity of large urban zones because the sub-surface is very conductive. Interpretation shows that the solid bedrock is located at a depth of at least 800 m to the south and 1300 m to the north; it could, however, be much deeper. Using complementary DC resistivity sounding and well-logging data, three main layers have been defined overlying the bedrock. These layers are, from surface to bottom, an unsaturated zone of sand, volcanic ash and clay about 10 m thick, followed by a very conductive (1.5 ohm·m) 200 m thick layer of sand and ash with intercalated clay, saturated with highly mineralized water, and finally a zone with resistivity increasing gradually to 60 ohm·m. The investigated deep aquifer constitutes most of this third layer. It consists of a sequence of sand, gravel, pyroclastites and mainly fractured basalts. MT resistivity soundings and magnetic transfer functions also indicate that a shallow resistive structure is dipping, from the northwest, into the lacustrine deposits of the basin. This geologic feature is likely to be highly permeable fractured basaltic flows, which provide a channel by which water contaminated by the Santa Catarina landfill may leak into the basin.     

Earthquakes and strength in the laminated lower crust —Can they be explained by the “corset model”?

We present a model that may explain deep crustal earthquakes observed, in particular, in several areas of highly reflective (laminated) lower continental crust. We combine observations from earthquake seismology, crustal reflection seismics and tectonic-rheological concepts. The study concentrates on parts of the northern Alpine foreland where many earthquakes occur inside the laminated lower crust, which is generally considered to be warm and weak. Thin mafic/ultramafic, sill-like intrusions and invisible dykes are assumed to form a corset-like network with high strength. This model can explain the observed strong and multiple reflections and the occurrence of rupture inside a stable structure within a weak lower crust. Tectonic stress transfer (from the Alpine collision zone or/and the Upper Rhine Graben) and its release may follow classical friction concepts. In addition, the heterogeneity of the laminated lower crust may also favour various viscous instabilities.     

Source terms and source strengths of the carbonaceous aerosol in the tropics

Atmospheric aerosol samples were collected in the Ivory Coast, primarily at Lamto (6°N, 5°W) between 1979 and 1981. The samples were analysed for total particulate carbon concentration and isotopic composition (¹³C/¹²C) by mass spectrometry. Observed concentrations were found high compared to values reported for temperate regions. Fine particulate carbon in the submicrometersize range accounted for 50 to 80% of the reported concentrations. At Lamto, both particulate carbon concentrations and isotopic ratios exhibit a large temporal variability which is shown to reflect the diversity of sources and their seasonal evolution. Natural emissions from the equatorial forest during the wet season, and biomass burning during the dry season, appear to be the major sources. The latter, though active during only a third of the year, is, on an annual basis, the most important source. Based on the data obtained at Lamto, an attempt has been made to estimate the flux of fine particulate carbon emitted from the tropical regions into the global troposphere. This flux, which is of the order of 20×10¹² g C/yr, appears to be equivalent to the flux of fine particulate carbon emitted from industrial sources. These results suggest that the tropospheric burden of fine particulate carbon in lowlatitude regions is dominated by the long-range transport of carbonaceous aerosols originating from the Tropics.     

Direct dating of Plio-Quaternary pumices by Ar/Ar step-heating and single-grain laser fusion methods: the example of the Monts-Dore massif (Massif Central, France)

K-feldspars separated from Plio-Quaternary pumice flows of the Monts-Dore massif (Massif Central, France) give ⁴⁰Ar/³⁹Ar saddle-shaped age spectra. Laser-probe analysis of hand-picked single grains gives ages in agreement with those of overlying and underlying lava flows previously dated by the conventional K-Ar method. The laser-probe ages are lower than the minimum ages measured on the populations of grains by the step-heating method. As previously suggested by Lo Bello and co-workers for the pumice flow of Neschers belonging to the same volcanic massif, the saddle-shaped age spectra are ascribed to the different Ar-release patterns of two populations of K-feldspars: (1) young sanidine phenocrysts of the pumices; and (2) old K-feldspars plucked from the Hercynian basement during the explosive eruption. Measurements of both the granitic rocks from surrounding areas and the granitic xenoliths included in pumices give ages around 330 Ma and show that most of the xenocrysts included in the pumices did not lose significant amounts of argon during the eruption. With the ⁴⁰Ar/³⁹Ar step-heating method, we were able to detect contamination of Quaternary K-feldspars by Hercynian K-feldspars as low as 0.25. Because pumice flows of the Monts-Dore massif crop out over large areas, these new ages will be useful for establishing a precise stratigraphy of the European Plio-Quaternary.     

The feasibility of low CO2 concentration targets and the role of bio-energy with carbon capture and storage (BECCS)

The United Nations Framework Convention on Climate Change (UNFCCC 1992) calls for stabilization of atmospheric greenhouse gas (GHG) concentrations at a level that would prevent dangerous anthropogenic interference with the climate system. We use three global energy system models to investigate the technological and economic attainability of meeting CO₂ concentration targets below current levels. Our scenario studies reveal that while energy portfolios from a broad range of energy technologies are needed to attain low concentrations, negative emission technologies—e.g., biomass energy with carbon capture and storage (BECCS)—significantly enhances the possibility to meet low concentration targets (at around 350 ppm CO₂).     

New estimations of precipitation and surface sublimation in East Antarctica from snow accumulation measurements

Surface mass balance (SMB) distribution and its temporal and spatial variability is an essential input parameter in mass balance studies. Different methods were used, compared and integrated (stake farms, ice cores, snow radar, surface morphology, remote sensing) at eight sites along a transect from Terra Nova Bay (TNB) to Dome C (DC) (East Antarctica), to provide detailed information on the SMB. Spatial variability measurements show that the measured maximum snow accumulation (SA) in a 15 km area is well correlated to firn temperature. Wind-driven sublimation processes, controlled by the surface slope in the wind direction, have a huge impact (up to 85% of snow precipitation) on SMB and are significant in terms of past, present and future SMB evaluations. The snow redistribution process is local and has a strong impact on the annual variability of accumulation. The spatial variability of SMB at the kilometre scale is one order of magnitude higher than its temporal variability (20–30%) at the centennial time scale. This high spatial variability is due to wind-driven sublimation. Compared with our SMB calculations, previous compilations generally over-estimate SMB, up to 65% in some areas.     

Sensitivity experiments for polar low forecasting with the CMC mesoscale finite‐element model

Abstract

High‐resolution versions of the Canadian operational regional finite‐element model (RFE) have been developed to assess their potential in simulating mesoscale, difficult‐to‐forecast and potentially dangerous weather systems commonly referred to as polar lows. The operational (1989) 100‐km version and a 50‐km version of the model have been run for two different polar low cases: one over Hudson Bay and one over Davis Strait. More integrations have also been performed on the Hudson Bay event both at 50 and 25 km to assess the model sensitivity to ice cover. As expected, the reduction in spatial truncation errors provided by the increase in resolution results in a better simulation of the systems. Moreover, when run at higher resolutions the model shows a significant sensitivity to ice cover. The results of the ice‐cover experiments also put into perspective the interaction between the heat and moisture fluxes at the surface, the low‐level wind structure, and the relation of these to the development of the polar low. This study suggests that the improved forecast accuracy obtained from increased resolution is limited by the correctness of the analysis of the ice cover, which acts as a stationary forcing for the entire forecast period.