An optimal determination of variable antenna height and power for in-orbit SAR operations

An optimal power and antenna height determination over a wide range of incidence angles is proposed for in-orbit operations of the spaceborne stripmap synthetic aperture radar (SAR) with variable antenna height and variable radiating element power. The antenna height and the average transmitted radio-frequency power of a radiating element for each incidence angle are determined so that the mapping area can be maximized with the constraints on the signal-to-noise ratio, ambiguities, and swath width, given the SAR geometry (an altitude and incidence angles) and radar wavelength. With the receive-chain power consumption of one transmit/receive module (P/sub r/=10 mW) and the SAR instrument power consumption without the phased array antenna (P/sub I/=5 W), the illustrative design example shows that the mapping area of the proposed SAR for the maximum incidence angle (/spl eta//sup max/=75/spl deg/) is about 269.1% of that resulted from utilizing only the variable antenna height. The proposed optimization would have a more beneficial effect on applications that need the high-incidence-angle operations.     

Impacts of Coagulation Pretreatment on MF Filtration and a Comparative Study of Different Membrane Module Types

Changes in the regulatory requirements and the forthcoming Disinfectant/Disinfection By-Products （D/DBP） Rule will require that drinking water treatment facilities be operated to achieve maximum removals of particles and disinfectant tolerant microorganisms as well as natural organic matter （NOM）. For drinking water production, the use of membrane filtration processes such as microfiltration and ultrafiltration （MF/UF） alone to satisfy the turbidity, particle and microorganism removal a requirement of the surface water treatment regulation （SWTR） is not enough. MF/UF treatment processes can achieve only nominal （10 percent） removal of disinfection by-products （DBP） precursors （James, et al., 1995）. On the other hand, too fast fouling can make the filtration processes more difficult to carry on. To solve these problems, many authors have been interested in installing coagulation pretreatment before membrane filtration to improve membrane performance. However, previous studies reported conflicting results. Some supported the effectiveness of coagulation pretreatment, while others contended that coagulation aggravated membrane performance. This research aims to identify the effects of coagulation pretreatment on membrane filtration through a pilot study using PVDF membrane in combination with analyzing the rationale of coagulation. Another objective of this research was to evaluate the different impacts on membrane performance of using different membrane modules （the submerged module and pressured module）. The results showed that coagulation pretreatment greatly improved the membrane performance, extending the filtration time as well as reducing the permeated organic level, and that the submerged module is much more efficient than the pressured module.     

Evidence of gas hydrate from downhole logging data in the Ulleung Basin, East Sea

The Gas Hydrate Research and Development Organization (GHDO) of Korea successfully accomplished both coring (hydraulic piston and pressure coring) and logging (logging-while-drilling, LWD, and wireline logging) to investigate the presence of gas hydrate during the first deep drilling expedition in the Ulleung Basin, East Sea of Korea (referred to as UBGH1) in 2007. The LWD data from two sites (UBGH1-9, UBGH1-10) showed elevated electrical resistivity (>80 Ω-m) and P-wave velocity (>2000 m/s) values indicating the presence of gas hydrate. During the coring period, the richest gas hydrate accumulation was discovered at these intervals. Based on log data, the occurrence of gas hydrate is primarily controlled by the presence of fractures. The gas hydrate saturation calculated using Archie’s relation shows greater than 60% (as high as ∼90%) of the pore space, although Archie’s equation typically overestimates gas hydrate saturation in near-vertical fractures. The saturation of gas hydrate is also estimated using the modified Biot-Gassmann theory (BGTL) by Lee and Collett (2006). The saturation values estimated rom BGTL are much lower than those calculated from Archie’s equation. Based on log data, the hydrate-bearing sediment section is approximately 70 m (UBGH1-9) to 130 m (UBGH1-10) in thickness at these two sites. This was further directly confirmed by the recovery of gas hydrate samples and pore water freshening collected from deep drilling core during the expedition. LWD data also strongly support the interpretation of the seismic gas hydrate indicators (e.g., vent or chimney structures and bottom-simulating reflectors), which imply the probability of widespread gas hydrate presence in the Ulleung Basin.     

Beta-�� distribution and its application to hydrologic events

The beta-κ distribution is a distinct case of the generalized beta distribution of the second kind. In previous studies, beta-p and beta-κ distributions have played important roles in representing extreme events, and thus, the present paper uses the beta-κ distribution. Further, this paper uses the method of moments and the method of L-moments to estimate the parameters from the beta-κ distribution, and to demonstrate the performance of the proposed model, the paper presents a simulation study using three estimation methods (including the maximum likelihood estimation method) and beta-κ and non beta-κ samples. In addition, this paper evaluates the performance of the beta-κ distribution by employing two widely used extreme value distributions (i.e., the GEV and Gumbel distributions) and two sets of actual data on extreme events.     

Tectonostratigraphic framework and depositional history of the deepwater Ulleung Basin,East Sea/Sea of Japan

The Ulleung Basin, East Sea/Japan Sea, is a Neogene back-arc basin and occupies a tectonically crucial zone under the influence of relative motions between Eurasian, Pacific and Philippine Sea plates. However, the link between tectonics and sedimentation remains poorly understood in the back-arc Ulleung Basin, as it does in many other back-arc basins as well, because of a paucity of seismic data and controversy over the tectonic history of the basin. This paper presents an integrated tectonostratigraphic and sedimentary evolution in the deepwater Ulleung Basin using 2D multichannel seismic reflection data. The sedimentary succession within the deepwater Ulleung Basin is divided into four second-order seismic megasequences (MS1 to MS4). Detailed seismic stratigraphy interpretation of the four megasequences suggests the depositional history of the deepwater Ulleung Basin occurred in four stages, controlled by tectonic movement, volcanism, and sea-level fluctuations. In Stage 1 (late Oligocene through early Miocene), syn-rift sediment supplied to the basin was restricted to the southern base-of-slope, whereas the northern distal part of the basin was dominated by volcanic sills and lava flows derived from initial rifting-related volcanism. In Stage 2 (late early Miocene through middle Miocene), volcanic extrusion occurred through post-rift, chain volcanism in the earliest time, followed by hemipelagic and turbidite sedimentation in a quiescent open marine setting. In Stage 3 (late middle Miocene through late Miocene), compressional activity was predominant throughout the Ulleung Basin, resulting in regional uplift and sub-aerial erosion/denudation of the southern shelf of the basin, which provided enormous volumes of sediment into the basin through mass transport processes. In Stage 4 (early Pliocene through present), although the degree of tectonic stress decreased significantly, mass movement was still generated by sea-level fluctuations as well as compressional tectonic movement, resulting in stacked mass transport deposits along the southern basin margin. We propose a new depositional history model for the deepwater Ulleung Basin and provide a window into understanding how tectonic, volcanic and eustatic interactions control sedimentation in back-arc basins.     

Assessment of drought vulnerability based on the soil moisture PDF

This paper studies the statistics of the soil moisture condition and its monthly variation for the purpose of evaluating drought vulnerability. A zero-dimensional soil moisture dynamics model with the rainfall forcing by the rectangular pulses Poisson process model are used to simulate the soil moisture time series for three sites in Korea: Seoul, Daegu, and Jeonju. These sites are located in the central, south-eastern, and south-western parts of the Korean Peninsular, respectively. The model parameters are estimated on a monthly basis using hourly rainfall data and monthly potential evaporation rates obtained by the Penmann method. The resulting soil moisture simulations are summarized on a monthly basis. In brief, the conclusions of our study are as follows. (1) Strong seasonality is observed in the simulations of soil moisture. The soil moisture mean is less than 0.5 during the dry spring season (March, April, and June), but other months exceed the 0.5 value. (2) The spring season is characterized by a low mean value, a high standard deviation and a positive skewness of the soil moisture content. On the other hand, the wet season is characterized by a high mean value, low standard deviation, and negative skewness of the soil moisture content. Thus, in the spring season, much drier soil moisture conditions are apparent due to the higher variability and positive skewness of the soil moisture probability density function (PDF), which also indicates more vulnerability to severe drought occurrence. (3) Seoul, Daegue, and Jeonju show very similar overall trends of soil moisture variation; however, Daegue shows the least soil moisture contents all through the year, which implies that the south-eastern part of the Korean Peninsula is most vulnerable to drought. On the other hand, the central part and the south-western part of the Korean peninsula are found to be less vulnerable to the risk of drought. The conclusions of the study are in agreement with the climatology of the Korean Peninsula.     

Carbon dioxide,water vapor and sensible heat fluxes over a tallgrass prairie

Fluxes of CO₂, water vapor and sensible heat were measured in a grassland ecosystem near Manhattan, Kansas, employing the eddy correlation technique. The vegetation at this site is dominated by big bluestem (Andropogon gerardii), switchgrass (Panicum virgatum), and indiangrass (Sorghastrum nutans). Diurnal patterns of the energy budget components and CO₂ fluxes are evaluated on a few selected days. Influence of high atmospheric evaporative demand and low availability of soil water are examined on (a) energy partitioning, and (b) the magnitudes and patterns of atmospheric carbon dioxide exchange.Published as Paper No. 8470, Journal Series, Nebraska Agricultural Research Division.     

Generic 3D interpolation of Holocene base‐level rise and provision of accommodation space,developed for the Netherlands coastal plain and infilled palaeovalleys

We present an interpolation model that describes Holocene groundwater level rise and the creation of accommodation space in 3D in the Rhine‐Meuse delta – the Netherlands. The model area (ca. 12 400 km²) covers two palaeovalleys of Late Pleistocene age (each 30 km wide) and the overlying Holocene deposits of the Rhine‐Meuse delta, the Holland coastal plain, and the Zuiderzee former lagoon. Water table rise is modelled from 10 800 to 1000 cal. BP, making use of age‐depth relations based on 384 basal peat index points, and producing output in the form of stacked palaeo groundwater surfaces, groundwater age‐depth curves, and voxel sets. These products allow to resolve (i) regional change and variations of inland water table slopes, (ii) spatial differences in the timing and pacing of transgression, and (iii) analysis of interplay of coastal, fluvial and subsidence controls on the provision of accommodation space. The interpolation model is a multi‐parameter trend function, to which a 3D‐kriging procedure of the residuals is added. This split design deploys a generic approach for modelling provision of accommodation space in deltas and coastal lowlands, aiming to work both in areas of intermediate data availability and in the most data‐rich environments. Major provision of accommodation space occurred from 8500 cal BP onwards, but a different evolution occurred in each of the two palaeovalleys. In the northern valley, creation of accommodation space began to stall at 7500 cal BP, while in the southern valley provision of new accommodation space in considerable quantities continued longer. The latter is due to the floodplain gradient that was maintained by the Rhine, which distinguishes the fluvial deltaic environment from the rest of the back‐barrier coastal plain. The interpolation results allow advanced mapping and investigation of apparent spatial differences in Holocene aggradation in larger coastal sedimentary systems. Furthermore, they provide a means to generate first‐order age information with centennial precision for 3D geological subsurface models of Holocene deltas and valley fills. As such, the interpolation is of use in studies into past and present land subsidence and into low land sedimentation.     

Holocene climate variability as derived from alkenone sea surface temperature and coupled ocean-atmosphere model experiments

Holocene climate modes are identified by the statistical analysis of reconstructed sea surface temperatures (SSTs) from the tropical and North Atlantic regions. The leading mode of Holocene SST variability in the tropical region indicates a rapid warming from the early to mid Holocene followed by a relatively weak warming during the late Holocene. The dominant mode of the North Atlantic region SST captures the transition from relatively warm (cold) conditions in the eastern North Atlantic and the western Mediterranean Sea (the northern Red Sea) to relatively cold (warm) conditions in these regions from the early to late Holocene. This pattern of Holocene SST variability resembles the signature of the Arctic Oscillation/North Atlantic Oscillation (AO/NAO). The second mode of both tropical and North Atlantic regions captures a warming towards the mid Holocene and a subsequent cooling. The dominant modes of Holocene SST variability emphasize enhanced variability around 2300 and 1000 years. The leading mode of the coupled tropical-North Atlantic Holocene SST variability shows that an increase of tropical SST is accompanied by a decrease of SST in the eastern North Atlantic. An analogy with the instrumental period as well as the analysis of a long-term integration of a coupled ocean-atmosphere general circulation model suggest that the AO/NAO is one dominant mode of climate variability at millennial time scales.     

湖南省柿竹园矽卡岩矿床中石榴石特征

通过野外与显微镜观察和电子探针分析, 对柿竹园多金属矿床矽卡岩中石榴石的特征进行了研究.根据石榴石的产出状态、矿物的共生组合, 矽卡岩可分为4个带: 磁铁矿-辉石-石榴石带、辉石-石榴石带、符山石-石榴石带、矽卡岩化大理岩带.从成分上的变化, 探讨了石榴石在各矽卡岩带中的特征.柿竹园矿床矽卡岩中的石榴石可分为早、晚两期, 早期形成的石榴石颜色为暗棕色, 并且在垂直和水平方向上有明显的变化规律.从磁铁矿-辉石-石榴石带到矽卡岩化大理石带, 随着石榴石中Fe₂O₃含量的减少, Al₂O₃含量的增加, 由钙铁榴石向钙铝榴石变化; 石榴石晶体具有从核部向边缘由均质性向非均质性变化的规律.早期石榴石形成于较氧化的条件下, 温度为520~620℃, 压力为1000×105Pa, 由富含Si, Al, Fe, Cl, F组分的热液和泥盆纪佘田桥组灰岩反应交代形成.当温度降至450~ 540℃, pH, Eh值降低时, 晚期石榴石形成的同时使白钨矿沉淀.晚期石榴石颜色比早期形成的石榴石浅, 为红色.结晶颗粒较大, 并且, 普遍可以观察到石榴石环带结构.