Weathering rates of sandstone in a semi-arid environment (Hunter Valley,Australia)

The rate of sandstone weathering in the semi-arid climate of the Hunter Valley, New South Wales, Australia has been estimated from observations of gravestone weathering in the area. The gravestone data points to two distinct stages in the weathering process. The first stage covering the first century of exposure is characterised by a relatively low recession rate of 0.5 mm/100 years. This is followed by a second stage in which the rate of weathering increases sharply to ca 2.5 mm/100 years. The non-linear nature of the weathering trends over time suggests that during the first century of exposure, structural changes took place within the sandstone material, which lay the foundation for accelerated weathering after further exposure. Laboratory trials were also conducted to identify the effectiveness of different weathering processes in the decay of sandstone in this region. Of the four processes examined, only the freeze–thaw cycle produced a significant degree of mass loss and is therefore most likely a strong contributor to the weathering of sandstone in this region.     

Wind-Tunnel Simulation of Approximately Horizontally Homogeneous Stable Atmospheric Boundary Layers

Boundary-Layer Meteorology - Two cases of an overlying inversion imposed on a stable boundary layer are investigated, extending the work of Hancock and Hayden (Boundary-Layer Meteorol...     

Sorptive flotation for metal ions recovery

In this study, the abstraction of nickel, copper and zinc ions from aqueous solutions has been investigated in a laboratory batch scale mode. A combined two-stage process is proposed as an alternative of the heavy metals removal from aqueous solutions. The first stage is the sorption of heavy metals onto non-living microorganisms followed by dispersed-air flotation of the loaded biomass. Three types of strains were used: Penicillium chrysogenum, Saccharomyces carlsbergensis and Streptomyces rimosus. The main parameters studied were solution pH, biomass concentration, surfactant concentration and flocculant concentration. The biomass reuse after elution was also examined. Remediation is a possible application of flotation being cost-effective and with readily available equipment and know-how. The application of this process looks promising.     

An experimental and computer simulation study of erosion on a mine tailings dam wall

Mine tailings dams pose a signi?cant risk to the environment if not correctly designed, built and maintained. The effect of erosion on a back‐?lled and capped earthen dam wall was examined by construction of an analogue in an experimental model landscape simulator. The ability of a computer‐based erosion model to simulate erosion processes on the experimental structure was examined. The experimental landscape simulator uses a rainfall simulator to create overland ?ow and erode an arti?cial soil. At the commencement of rainfall, erosion occurred rapidly with deep gullies developing on the dam wall batter. The gullies developed by downcutting, with consequent bank collapse and slumping, and followed ?ow lines towards their source. A physically based erosion model (SIBERIA) was used to simulate erosion on the experimental dam wall. Erosion and consequent development of the experimental structure were modelled by SIBERIA. The ability of SIBERIA to model incision and landscape development in the experimental setting was further examined by use of a simple one‐dimensional experimental catchment. The laboratory experiment and computer simulations demonstrated that erosion on the tailings dam is driven by concentrated runoff and that runoff control is crucial to the long‐term stability of such structures. The study demonstrates that computer‐based erosion models can be used to predict how erosion occurs on the experimental landscapes examined, thus providing con?dence in their use and application. Copyright © 2004 John Wiley & Sons, Ltd.     

Photometry and spectroscopy of the luminous red nova PSNJ14021678+5426205 in the galaxy M101

We present the results of the study of a red nova from the observations carried out with the Russian 6-m telescope (BTA) along with other telescopes of SAO RAS and SAI MSU. To investigate the nova progenitor,we used the data from the Digital Sky Survey and amateur photos available on the Internet. In the period between April 1993 and July 2014, the brightness of the progenitor gradually increased by \(2_ \cdot ^m 2\) in the V-band. At the peak of the first outburst in mid-November 2014, the star reached an absolute visual magnitude of \(- 12_ \cdot ^m 75\) but was discovered later, in February 2015, in a repeated outburst at the magnitude of \(- 11_ \cdot ^m 65\). The amplitude of the outburst was minimum among the red novae, only \(5_ \cdot ^m 6\) in V-band. The Hα emission line and the background of a cool supergiant continuum with gradually decreasing surface temperature were observed in the spectra. Such process is typical for red novae, although the object under study showed extreme parameters: maximum luminosity, maximum outburst duration, minimum outburst amplitude, unusual shape of the light curve. This event is interpreted as a massive OB star system components’merging accompanied by formation of a common envelope and then the expansion of this envelope with minimal energy losses.     

Fallout radionuclide tracers identify a switch in sediment sources and transport-limited sediment yield following wildfire in a eucalypt forest

Fire can alter sediment sources and transport rates in river basins, changing landforms and aquatic habitats and degrading downstream water quality. Variability in the response between environments, between fires, and with time since fire makes predicting the catchment-scale effect of individual fires difficult. This study applies the fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_xs to trace the sources and transport of fine sediment through a river network following a wildfire of moderate to extreme severity in the 629-km² eucalypt-forested Nattai River water-supply catchment near Sydney, Australia. The tracer analysis showed that post-fire erosion caused a switch in fine (< 10 µm) sediment sources from 80% subsoil derived from gully and river bank erosion to 86% topsoil derived from hillslope surface erosion. The fine sediment phosphorus content increased 4–10 fold over pre-fire levels. Annual post-fire sediment yields estimated from suspended solids rating curves were 109–250 times higher than they would have been without fire. A large additional amount of sediment remained stored within the river network for at least four years, particularly in lower-gradient reaches. Analysis of a sediment core showed that surface erosion following a previous fire had supplied at least 29% of total catchment sediment yield over the past 36 years. It is concluded that wildfire can alter catchment sediment budgets in two ways. Firstly, a spatially-diffuse pulse of elevated erosion is associated with moderate or intense rainfall events in post-fire years. Secondly, pulses of elevated catchment sediment yield are driven by the timing and river sediment transport capacity of runoff events. Severe post-fire erosion and high interannual hydrologic variability can result in large sediment stores persisting within the river network for many years. Fallout radionuclide tracers are shown to be useful in quantifying fine sediment sources and transport dynamics following wildfire, and the contribution of wildfire to catchment sediment yield.     

The fate of suspended sediment and particulate organic carbon in transit through the channels of a river catchment

Particulate organic matter (POM) transiting through rivers could be lost to overbank storage, stored in‐channel, added to by erosion or autochthonous production, or turned over to release greenhouse gases to the atmosphere (either while in the water column or while stored in the channel). In the UK, a net loss of POM across catchments has been recorded, and the aim here was to investigate the balances of processes acting on the POM. This study considered records of suspended sediment and POM flux in comparison to stream flow, velocity, stream power, and residence time for the River Trent (English Midlands, 8,231 km²). We show that for the lower two thirds (106 km) of the River Trent, 2% is lost to overbank storage; 10% is lost to the atmosphere in the water column; and 31% is turned over while in temporary storage. Permanent in‐channel storage is negligible, and for the lower course of the river, material stored in‐channel will have a residence time of the order of hundreds of days between the last flood hydrograph of one winter and the first winter storm of the next winter (usually in the same calendar year). When considered at the scale of the UK, 1% POM in transit would be lost to overbank sedimentation; 5% turned over in the water column, and 14% turned over while in temporary storage. In the upper third of the study river channel, there is insufficient stream power to transport sediment and so in‐channel storage or in‐channel turnover over to the atmosphere dominate. The in‐channel processes of the River Trent do not conform to that expected for river channels as the headwaters are not eroding or transporting sediment. Therefore, the source of sediment must be lower down the channel network.     

Use of fallout tracers 7Be, 210Pb and 137Cs to distinguish the form of sub‐surface soil erosion delivering sediment to rivers in large catchments

Fallout radionuclides (FRNs) ¹³⁷Cs and ²¹⁰Pb are well established as tracers of surface and sub‐surface soil erosion contributing sediment to river systems. However, without additional information, it has not been possible to distinguish sub‐surface soil erosion sources. Here, we use the FRN ⁷Be (half‐life 53 days) in combination with ¹³⁷Cs and excess ²¹⁰Pb to trace the form of erosion contributing sediment in three large river catchments in eastern Australia; the Logan River (area 3700 km²), Bowen River (9400 km²) and Mitchell River (4700 km²). We show that the combination of ¹³⁷Cs, excess ²¹⁰Pb and ⁷Be can discriminate horizontally aligned sub‐surface erosion sources (rilled and scalded hillslopes and the floors of incised drainage lines and gully ‘badland’ areas) from vertical erosion sources (channel banks and gully walls). Specifically, sub‐surface sources of sediment eroded during high rainfall and high river flow events have been distinguished by the ability of rainfall‐derived ⁷Be to label horizontal soil surfaces, but not vertical. Our results indicate that in the two northern catchments, erosion of horizontal sub‐surface soil sources contributed almost as much fine river sediment as vertical channel banks, and several times the contribution of hillslope topsoils. This result improves on source discrimination provided previously and indicates that in some areas erosion of hillslope soils may contribute significantly to sediment yield, but not as topsoil loss. We find that in north‐eastern Australia, scalded areas on hillslopes and incising drainage lines may be sediment sources of comparable importance to vertical channel banks. Previous studies have used the combination of ¹³⁷Cs, excess ²¹⁰Pb and ⁷Be to estimate soils losses at the hillslope scale. Here, we show that with timely and judicious sampling of soil and sediment during and immediately after high flow events ⁷Be measurements can augment fallout ¹³⁷Cs and ²¹⁰Pb to provide important erosion source information over large catchments. Copyright © 2013 John Wiley & Sons, Ltd.     

Evaluating a new landform evolution model: A case study using a proposed mine rehabilitation landform

Landform evolution models are powerful tools for determining long-term erosional stability and denudation rates spanning geological timescales. SIBERIA, CAESAR and CHILD are examples of these model. The newly developed State Space Soil Production and Assessment Model (SSSPAM) coupled soilscape-landform evolution model has the ability to assess overall erosion rates of catchment scale landforms either using short-term precipitation events, variable precipitation or time-averaged precipitation (annual average). In addition, SSSPAM has the capability of developing the subsurface soil profile through weathering and armouring. In SSSPAM, physical processes of pedogenesis such as erosion and armouring, diffusion, sediment deposition and weathering are modelled using a state space matrix approach. In this article we simulate the short-term evolution (100 years) of a proposed post-mining landform using both SIBERIA and SSSPAM and compare the erosion and sediment output results. For the short-term simulations SSSPAM's armouring capability was disabled. The models were then used to simulate the evolution of the catchment for 10,000 years. Results demonstrate that the short-term SSSPAM simulation results compare well with the results from the established landform evolution model SIBERIA. The long-term armouring disabled SSSPAM simulations produces simulated erosion rates comparable with SIBERIA simulations both of which are similar to upper limit of field measured denudation rates. The SSSPAM simulation using armouring demonstrated that armouring reduced the erosion rate of the catchment by a factor of 4 which is comparable with the lower limit of field measured denudation rates. This observation emphasizes the importance of armouring in long-term evolution of landforms. Soil profile cross-sections developed from the same results show that SSSPAM can also reproduce subsurface soil evolution and stratification and spatial variability of soil profile characteristics typically observed in the field.     

Predicting gully erosion using landform evolution models: Insights from mining landforms

Incision as a result of fluvial erosion is an important process to model when simulating landform evolution. For gullies, it is apparent that coupled with the processes that cause incision there must be a range of processes that stop incision. Once started, rills and gullies will grow infinitely without a reduction in support area and/or being arrested by deposition and armouring. Some of these processes have been well studied under the heading of inter-rill erosion. Other limiting processes are related to the shape of the landform and how downstream deposition areas are linked geomorphically to the upstream gullies. Armouring is also an important process that reduces gully incision and extension, where the gully erodes to bedrock and the resistant base limits further development. Post-mining landscapes are new surfaces with new materials and provide the opportunity to examine gully initiation, extension and stabilization. The work presented here has largely been driven by the mining industry, where there has been a need to assess erosion over hazardous wastes like mine tailings and low-level nuclear waste. We demonstrate the usefulness of computer-based landscape evolution models and the more recent soilscape models (that include both surface and subsurface processes) to understand both fluvial and diffusive processes as well as armouring in a digital elevation model framework (as well as landscape evolution). Landscape evolution models provide insights into complex non-linear systems such as gullies. A key need is that of field data to parameterize and validate the models. It is argued that current models have more capability than field data available for parameterization and importantly the validation of model outputs.