Paleoseismological investigations along Joggers Park Fault,Port Blair,South Andaman: Implications towards delineation of blind thrusting and related crustal deformation through ground penetrating radar (GPR) and electrical resistivity techniques (ERT and VES)

A comprehensive paleoseismological investigations was carried out along Joggers Park Fault (striking NW-SE) reveals pervasive traces of active compressional tectonics (blind thrusting) and shallow-surface recent tectonic signatures along the fault. The geometry and trends in the tectonic deformation of the blind zone (shallow-subsurface stratigraphy) were examined with GPR and electrical resistivity tomography (ERT) and vertical electrical sounding (VES), strongly demonstrates severe tectonic deformation (persistent tectonic style) from Quaternary to Holocene times in a compressive stress regime. The surface manifestation of deformation (topographic expression) along the fault can be marked as hanging wall uplift and can be visually observed in the exposed sections at nearly half kilometer distance from the table land of Joggers Park in the form of a well-defined disconnected high angle thrust fault scarp (reverse fault). The reverse fault kinematically and intimately linked with underlying fault geometry provides adduced evidence to evaluate strike displacement profiles (displacement length relationship) along the fault. In addition, deformed stacked colluvial wedge below the scarp represents a powerful basis to calibrate recent and long term slip rates of the underlying fault.     

Using high-resolution satellite imagery to provide a relief priority map after earthquake

After the earthquake occurrence, collecting correct information about the extent of damage is essential for managing critical conditions and allocating limited resources. The prepared building damage maps sometimes bring about waste of time required for rescuing individuals under the rubble by wrongly conducting rescue teams toward regions with a lower rescue priority. In this research, an algorithm based on using a proposed standard at database level was developed to prioritize damaged buildings by considering five key elements of land use type, the degree of damage to buildings, the land use differentiation index, time of the highest population density in each land use, and time of disaster’s incidence. The steps of the proposed method which was implemented in the MATLAB environment include: detecting buildings on the pre- and post-event imagery, implementing texture features for each candidate building, choosing the optimal features by genetic algorithm, determining the degree of building damage in three classes of negligible damage, substantial damage, and heavy damage by using the difference between chosen features as inputs of the designed neurofuzzy inference system. Data collected from field observations were compared to the output obtained from the proposed algorithm. This comparison presented a general accuracy of 88% and Kappa coefficient of 79% in the classification of buildings into three damage classes. The proposed standard then was used for classifying damaged buildings into relief priorities of high, medium, and low. Findings revealed that the relief priority map could be a basis for correct guidance of relief and rescue teams during crucial times following earthquakes.     

Spatial prediction of soil erosion susceptibility: an evaluation of the maximum entropy model

Soil erosion is considered as the most widespread form of soil degradation which causes serious environmental problems. This study investigates the performance of the maximum entropy (ME) in mapping rill erosion susceptibility in the Golgol watershed, Ilam province, Iran. To this end, ten rill erosion conditioning factors were selected to be employed in the modelling process based on an investigation of the literature. These layers are: elevation, slope percent, aspect, stream power index, topographic wetness index, distance from streams, plan curvature, lithology, land use, and soil. Then, a training dataset of rill erosion locations was used for modelling this phenomenon. The area under receiver operating characteristics curve was used for evaluating the performance of the ME model. In addition, Modified Pacific South-West Inter Agency Committee (MPSIAC) framework was applied and sediment yield was determined for different hydrological units in the study area. At last, Jackknife test was implemented to show the contribution of the factors in the modelling process. The results depicted that area under ROC curve for training and validation datasets were 0.867, and 0.794, respectively. Therefore, this conclusion can be achieved that ME worked well and could be a good tool for generating rill erosion susceptibility maps and its output could be employed for soil conservation in similar areas.     

GIS-based gully erosion susceptibility mapping: a comparison among three data-driven models and AHP knowledge-based technique

Toroud Watershed in Semnan Province, Iran is a prone area to gully erosion that causes to soil loss and land degradation. To consider the gully erosion, a comprehensive map of gully erosion susceptibility is required as useful tool for decreasing losses of soil. The purpose of this research is to generate a reliable gully erosion susceptibility map (GESM) using GIS-based models including frequency ratio (FR), weights-of-evidence (WofE), index of entropy (IOE), and their comparison to an expert knowledge-based technique, namely, Analytic Hierarchy Process (AHP). At first, 80 gully locations were identified by extensive field surveys and Google Earth images. Then, 56 (70%) gully locations were randomly selected for modeling process, and the remaining 26 (30%) gully locations were used for validation of four models. For considering geo-environmental factors, VIF and tolerance indices are used and among 18 factors, 13 factors including elevation, slope degree, slope aspect, plan curvature, distance from river, drainage density, distance from road, lithology, land use/land cover, topography wetness index (TWI), stream power index (SPI), normalized difference vegetation index (NDVI), and slope–length (LS) were selected for modeling aims. After preparing GESMs through the mentioned models, final maps divided into five classes including very low, low, moderate, high, and very high susceptibility. The receiver operating characteristic (ROC) curve and the seed cell area index (SCAI) as two validation techniques applied for assessment of the built models. The results showed that the AUC (area under the curve) in training data are 0.973 (97.3%), 0.912 (91.2%), 0.939 (93.9%), and 0.926 (92.6%) for AHP, FR, IOE, and WofE models, respectively. In contrast, the prediction rates (validating data) were 0.954 (95.4%), 0.917 (91.7), 0.925 (92.5%), and 0.921 (92.1%) for above models, respectively. Results of AUC indicated that four model have excellent accuracy in prediction of prone areas to gully erosion. In addition, the SCAI values showed that the produced maps are generally reasonable, because the high and very high susceptibility classes had very low SCAI values. The results of this research can be used in soil conservation plans in the study area.     

Field evidence of Quaternary seismites in the Mostaganem-Relizane (western Algeria) region: seismotectonic implication

Northwestern Algeria, Tell Atlas chain, belongs to the converging Africa-Eurasia plate boundary. Several active faults have been previously identified and several earthquakes occurred in the past. In the present study, seismites are observed in the Quaternary deposits. The identified seismites include injection sand dykes, pillar structures, pillow structures, load-cast structures, water escape structures, sismoslumps, thixotropic wedges, and thixotropic bowls. The following arguments support their seismic origin: (i) presence of active faults able of producing strong earthquakes, (ii) the granulometric characteristics of the deposits are favorable to liquefaction, (iii) the observed features, mainly those related to water escape structures, are comparable to those observed in modern earthquakes. Therefore, such features are evidence of the occurrence of earthquakes of M?>?5.5 magnitude in this study area, which may occur in the future.     

Skin friction behavior of pile fully embedded in limestone

Pile foundation system in limestone rock layers is commonly used in Riyadh area, Saudi Arabia, for high-rise building, bridges, and other structures. Especially in Riyadh region, bored piles are used for bridges and underpasses not only because of bearing capacity but mainly because of limited spaces for using shallow foundations. In addition, piles are used for bridges over wadis to avoid scouring effects. The loads are transferred by the pile from a superstructure to the rock strata through side friction and end-bearing resistance. However, there are no studies conducted in Riyadh area to quantify the skin friction capacity of pile embedded in limestone rock. Accordingly, this experimental study describes in details the behavior of load transfer mechanism through side friction only on a reinforced concrete pile (75 mm diameter and 150 mm long) constructed on hard limestone rock sample. Soft material (Styrofoam) was placed at the bottom of the pile to eliminate the effect of end-bearing resistance. Unconfined compression test was conducted on intact rock sample to find out the properties of the rock used. The result of the ultimate side friction obtained from the test was compared with values predicted by other researcher methods mentioned in the literature.     

Analytical solution of polymer slug injection with viscous fingering

We present an analytical solution to estimate the minimum polymer slug size needed to ensure that viscous fingering of chase water does not cause its breakdown during secondary oil recovery. Polymer flooding is typically used to improve oil recovery from more viscous oil reservoirs. The polymer is injected as a slug followed by chase water to reduce costs; however, the water is less viscous than the oil. This can result in miscible viscous fingering of the water into the polymer, breaking down the slug and reducing recovery. The solution assumes that the average effect of fingering can be represented by the empirical Todd and Longstaff model. The analytical calculation of minimum slug size is compared against numerical solutions using the Todd and Longstaff model as well as high resolution first contact miscible simulation of the fingering. The ability to rapidly determine the minimum polymer slug size is potentially very useful during enhanced oil recovery (EOR) screening studies.     

Design and implementation of a model predictive observer for AHRS

A GPS-aided Inertial Navigation System (GAINS) is used to determine the orientation? position and velocity of ground and aerial vehicles. The data measured by Inertial Navigation System (INS) and GPS are commonly integrated through an Extended Kalman Filter (EKF). Since the EKF requires linearized models and complete knowledge of predefined stochastic noises? the estimation performance of this filter is attenuated by unmodeled nonlinearity and bias uncertainties of MEMS inertial sensors. The Attitude Heading Reference System (AHRS) is applied based on the quaternion and Euler angles methods. A moving horizon-based estimator such as Model Predictive Observer (MPO) enables us to approximate and estimate linear systems affected by unknown uncertainties. The main objective of this research is to present a new MPO method based on the duality principle between controller and observer of dynamic systems and its implementation in AHRS mode of a low-cost INS aided by a GPS. Asymptotic stability of the proposed MPO is proven by applying Lyapunov’s direct method. The field test of a GAINS is performed by a ground vehicle to assess the long-time performance of the MPO method compared with the EKF. Both the EKF and MPO estimators are applied in AHRS mode of the MEMS GAINS for the purpose of real-time performance comparison. Furthermore? we use flight test data of the GAINS for evaluation of the estimation filters. The proposed MPO based on both the Euler angles and quaternion methods yields better estimation performances compared to the classic EKF.     

Landslide susceptibility mapping using machine learning algorithms and comparison of their performance at Abha Basin,Asir Region,Saudi Arabia

The current study aimed at evaluating the capabilities of seven advanced machine learning techniques(MLTs),including,Support Vector Machine(SVM),Random Forest(RF),Multivariate Adaptive Regression Spline(MARS),Artificial Neural Network(ANN),Quadratic Discriminant Analysis(QDA),Linear Discriminant Analysis(LDA),and Naive Bayes(NB),for landslide susceptibility modeling and comparison of their performances.Coupling machine learning algorithms with spatial data types for landslide susceptibility mapping is a vitally important issue.This study was carried out using GIS and R open source software at Abha Basin,Asir Region,Saudi Arabia.First,a total of 243 landslide locations were identified at Abha Basin to prepare the landslide inventory map using different data sources.All the landslide areas were randomly separated into two groups with a ratio of 70%for training and 30%for validating purposes.Twelve landslide-variables were generated for landslide susceptibility modeling,which include altitude,lithology,distance to faults,normalized difference vegetation index(NDVI),landuse/landcover(LULC),distance to roads,slope angle,distance to streams,profile curvature,plan curvature,slope length(LS),and slope-aspect.The area under curve(AUC-ROC)approach has been applied to evaluate,validate,and compare the MLTs performance.The results indicated that AUC values for seven MLTs range from 89.0%for QDA to 95.1%for RF.Our findings showed that the RF(AUC=95.1%)and LDA(AUC=941.7%)have produced the best performances in comparison to other MLTs.The outcome of this study and the landslide susceptibility maps would be useful for environmental protection.