An optimal determination of variable antenna height and power for in-orbit SAR operations

An optimal power and antenna height determination over a wide range of incidence angles is proposed for in-orbit operations of the spaceborne stripmap synthetic aperture radar (SAR) with variable antenna height and variable radiating element power. The antenna height and the average transmitted radio-frequency power of a radiating element for each incidence angle are determined so that the mapping area can be maximized with the constraints on the signal-to-noise ratio, ambiguities, and swath width, given the SAR geometry (an altitude and incidence angles) and radar wavelength. With the receive-chain power consumption of one transmit/receive module (P/sub r/=10 mW) and the SAR instrument power consumption without the phased array antenna (P/sub I/=5 W), the illustrative design example shows that the mapping area of the proposed SAR for the maximum incidence angle (/spl eta//sup max/=75/spl deg/) is about 269.1% of that resulted from utilizing only the variable antenna height. The proposed optimization would have a more beneficial effect on applications that need the high-incidence-angle operations.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

Isostasie flexurale et érosion différentielle : modélisation numérique appliquée au seuil du PoitouFlexural isostasy and differential erosion: numerical modelling applied at the ‘Seuil du Poitou’

One uses the principle of flexural isostasy to represent the uplift of the ‘Seuil du Poitou’ in response to erosion. The model indicates that a different uplift of on the last five millions years resulted from an erosion paradoxically stronger in the crystalline basement than in the limestones bedrock. To cite this article: J.-C. Maurin, K. Renaud, C. R. Geoscience 334 (2002) 1149–1155.     

Experimental validation of the wavefield transform of electromagnetic fields

The wavefield transform is a mathematical technique for transforming low-frequency electromagnetic (EM) signals to a non-diffusive wave domain. The ray approximation is valid in the transform space and this makes traveltime tomography for 3D mapping of the electrical conductivity distribution in the subsurface possible. The transform, however, imposes stringent frequency bandwidth and signal-to-noise ratio requirements on the data. Here we discuss a laboratory scale experiment designed to collect transform quality EM data, and to demonstrate the practical feasibility of transforming these data to the wavefield domain.
We have used the scalable nature of EM fields to design a time-domain experiment using graphite blocks to simulate realistic field conditions while leaving the time scale undisturbed. The spatial dimensions have been scaled down by a factor of a thousand by scaling conductivity up by a factor of a million. The graphite blocks have two holes drilled into them to carry out cross-well and borehole-to-surface experiments. Steel sheets have been inserted between the blocks to simulate a conductive layer.
Our experiments show that accurate EM data can be recorded on a laboratory scale model even when the scaling of some features, such as drill-hole diameters, is not maintained. More importantly, the time-domain EM data recorded in cross-well and surface-to-borehole modes can be usefully and accurately transformed to the wavefield domain. The observed wavefield propagation delay is proportional to the direct distance between the transmitter and receiver in a homogeneous medium. In a layered medium, data accuracy is reduced and, hence, our results are not so conclusive. On the basis of the experimental results we conclude that the wavefield transform could constitute a valid approach to the interpretation of accurate, undistorted time-domain data if further improvement in the transform can be realized.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

格尔木地磁台观测环境测试与分析

通过实验测试和计算，分析了高压输出电线等干扰源对格尔木地磁台观测环境的影响，进一步对格尔木地磁台观测环境现状，及今后观测环境保护工作的要点进行了综合分析讨论。     

Dinosaur tracks from the Cretaceous of South Korea: Distribution, occurrences and paleobiological significance

Abstract   Abundant dinosaur fossils including dinosaur footprints, eggs and nests, teeth and bones have been found from the Cretaceous non-marine deposits of Korea. Among them, dinosaur tracks are the most distinctive, and some track sites are among the most famous in the world. Until now, 27 dinosaur track localities have been discovered from the Cretaceous strata in the Gyeongsang Basin and several small basins. Ornithopod tracks are most abundant at most Korean track sites, and most of them are identified as Caririchnium ; that is, large ornithopod footprints with wide hoof impressions. Most theropod tracks are found in Neungju Basin and they consist of various types of small or medium-sized bird-like footprints, and other large footprints. Sauropod tracks are also abundant in the Gyeongsang Basin. The sauropod tracks vary in size, shape, and pattern of trackway, and suggest that diverse sauropods existed in this area. These diverse tracks in South Korea suggest that various dinosaurs flourished at the margins of lakes distributed in the southern part of the Korean Peninsula during the Cretaceous.