大沽河下游咸水入侵区含水砂层水敏感性评价

通过室内砂柱的水平渗流试验,对大沽河下游成水入侵区含水砂层的水敏感性进行了评价。对海水入侵治理的注淡压成和抽成方案过程中含水层的渗透性变化进行了研究．提出了控制和减小方案实施过程中含水砂层渗透性降低的方法和措施。研究结果表明：该含水层具有显著的水敏感性特征,注淡压成过程导致其渗透性下降幅度超过了两个数量级;注淡和抽成的流速分别超过21ml／min和42ml／min时,亦能引起含水砂层水敏感性的发生,称为临界流速;淡水驱替咸水过程中存在一个临界离子强度-7638us／cm,驱替水的离子强度不宜小于该值以避免水敏性的发生。     

车载伽玛能谱测量数据处理方法探讨

放射性测量过程中,受仪器本身和外界环境的影响,需要对仪器性能进行检查.介绍了GR-660车载伽玛能谱测量系统,对仪器的稳定性和重复性进行了实验分析.介绍了噪声调整后奇异值分解方法和自适应神经网络模糊系统分析方法,通过处理航空标准模型实测数据来对两种方法进行了比较分析,应用变异系数方法对区域铀含量进行了分析.     

华北东部平原深层抽水井水跃值计算方法及其规律研究

文章分析了目前常用的几种水跃值计算方法的适用性与不足,认为在华北东部平原地下水位变化强烈的漏斗区,这些方法均难以应用。同时提出了C—G法,即一次定流量抽水同步观测抽水井和观测井的水位,合理地解决了区域背景水位对水跃值计算的影响。研究表明,与修正后的多次定流量试验法——两次定流量抽水法相比,C—G法计算结果可靠。然后探讨了如何间接获取抽水期间抽水层区域背景水位动态资料的方法,校正背景水位波动对抽水水位的影响,采用自动水位计(DIVER)同步监测井中大气压对地下水位的影响。最后分析水跃值随时间和抽水井水位降深的变化规律。     

粗颗粒悬移质测验误差分析

本文根据流速与含沙量分布,研究了悬移质积点法对粗颗粒含沙量测验误差.首先指出无论从输沙率还是从悬浮高度看,粗颗粒悬移质集中于河底,致使水文测验中的一些测验方法(如一点法、二点法、三点法等)带有较大的误差.进而分析了各种测法对粗颗粒的相对误差,并且随着颗粒变粗,误差愈来愈大,以致不能接受.这种情况在水库下游河道冲刷过程中,会在一定程度上出现,必须重视研究和调整测验方法.最后通过与长江委水文局在沙市及监利两水文站试验结果对比,证明本文理论上的分析是可信的.     

鲁中南隆起区第四纪晚期断裂活动特征

根据野外调查，并综合前人的研究资料，对鲁中南地区第四纪晚期断裂活动进行了分析，研究表明，鲁中南隆起区第四纪断裂活动具有时空不均匀性，主要表现为第四纪时期断层活动强度变化和断裂活动的群集性以及第四纪晚期断裂活动段分布的局限性上。对于鲁中南地区而言，活动断层可以分为中更新世中期（500kaBP)至晚更新世初期（90kaBP)活断层和晚更新世中、晚期至全新世早期活断层两类；其中前一类（主要是中更新世断裂）断裂数量较多，分布较为广泛，而晚更新世晚期以来的活动断裂段的数量较少，分布较局限。它们对地震的控制能力不同，前者可控制5．5级左右的地震，而后一类可控制6－7级地震的发生。     

DISCUSSION ON THE PLEISTOCENE HIGH SEA LEVEL ABOUT THE SHANDONG PENINSULA

It has for many years been controversial whether there was a Pleistocene high sea level on the Shandong Peninsula. Our investigations in recent years suggest that the red sandy sediments distributed around the Yuanyaodun village, Weihai County, the "Liukuang Red Bed" and the loess-like deposits near Penglai County should be terrestrial deposits, and there is will not a convincing evidence to confirm that abrasion landforms found above the 10m elevation oa the coast are of marine origin. From these, it is still not safe to say that a high sea level had occurred in the Shandong Peninsula during the Pleistocene.     

Prediction of local scour around circular piles under waves using a novel artificial intelligence approach

Abstract

The scour phenomena around vertical piles in oceans and under waves may influence the structure stability. Therefore, accurately predicting the scour depth is an important task in the design of piles. Empirical approaches often do not provide the required accuracy compared with data mining methods for modeling such complex processes. The main objective of this study is to develop three data-driven methods, locally weighted linear regression (LWLR), support vector machine (SVR), and multivariate linear regression (MLR) to predict the scour depth around vertical piles due to waves in a sand bed. It is the first effort to develop the LWLR to predict scour depth around vertical piles. The models simulate the scour depth mainly based on Shields parameter, pile Reynolds number, grain Reynolds number, Keulegan–Carpenter number, and sediment number. 111 laboratory datasets, derived from several experimental studies, were used for the modeling. The results indicated that the LWLR provided highly accurate predictions of the scour depths around piles (R?=?0.939 and RMSE = 0.075). Overall, this study demonstrated that the LWLR can be used as a valuable tool to predict the wave-induced scour around piles.     

长牡蛎碱性磷酸酶的分离纯化及部分性质研究

本文以长牡蛎为酶源提取材料,用正丁醇抽提,硫酸铵分级分离,DEAE-52和Sephadex G-100柱层析,得到一定纯度的碱性磷酸酶,提纯倍数为61.96,比活力达1.326U/mg.该酶的最适pH值9.6,最适温度38℃,初速度6.8μmol/(dm~3·min),米氏常数Km值为1.30mmol/dm~3.实验结果表明,Mg~(2+)对该酶有明显的激活作用;Zn~(2+)、Cu~(2+)、Hg~(2+)对该酶有明显的抑制作用.     

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.