鳜鱼(Siniperca chuatsi)脂肪酸去饱和酶和延长酶基因全长cDNA序列的克隆与分析

利用RT-PCR和RACE方法克隆得到鳜鱼肝脏中控制高不饱和脂肪酸合成的脂肪酸去饱和酶(fatty acid desaturase,FAD)和脂肪酸延长酶(fatty acid elongase,ELO)基因的全长cDNA序列。FAD基因的全长cDNA序列1882bp,编码445个氨基酸,该蛋白序列含有FAD全部的特征结构区,包括3个组氨酸簇、2个跨膜区和1个细胞色素b5结构域,与其它鱼类FAD氨基酸序列的同源性为66.5%-90.1%,系统树分析显示其与欧洲鲈鱼和金头鲷等海水鱼类的亲缘关系最近。获得的ELO基因全长cDNA序列1401bp,编码294个氨基酸,该蛋白序列含有单一的氧化还原中心组氨酸簇、内质网停留信号和多个跨膜区等ELO特征结构,与其它几种鱼类ELO氨基酸序列的同源性为71.8%-86.7%,系统进化分析显示其与南方蓝鳍金枪鱼和金头鲷的亲缘关系较近。鳜鱼FAD和ELO基因全长cDNA序列的获得可为进一步研究其HUFA合成能力及调控机理奠定基础。     

雷诺数对圆形渐缩喷嘴湍流射流的影响

The present study systematically investigates by experiment the influence of Reynolds number (Re) on a turbulent jet issuing from a smoothly-contracting round nozzle. Measurements were performed for seven Reynolds numbers varying from Re = 4,050 to Re = 20,100 using single hot-wire anemometry and over an axial distance of 30 nozzle exit diameters. Although all the exit velocity profiles are of "top-hat" shape, these measurements reveal significant dependence on Re of the exit and downstream flows. The effect of Re on both the mean and turbulent fields is substantial for Re ＜ 10,000 and becomes weak beyond Re = 10,000. The length of the jet’s potential core and the far-field rates of decay and spread all depend significantly on Re.     

局域椭圆偏振光束强聚焦性质的研究

数值计算了局域椭圆偏振光束强聚焦时在焦平面上的横向场强分布、纵向场强分布、横向能流以及纵向角动量分布.结果显示在焦平面上光束总的纵向角动量为零,但在不同象限光束具有不同方向的纵向角动量.当相位延迟角度在0到π之间变化时横向场强分布基本不变,但纵向场强分布有很明显的变化.液晶相位延迟器由外部电压控制,使其相位延迟角度能在0到π之间可以连续取值.因而液晶相位延迟器的外接电压可以实现对焦平面上的纵向场强以及纵向角动量的实时调控.     

一种胶体光子晶体修饰的光纤

设计了一种胶体光子晶体修饰的光纤. 采用恒温快速蒸发法直接在经切割刀处理后的光纤端面生长胶体晶体,再与另一根切割后的光纤在毛细玻璃管中完成对接,制备成胶体光子晶体修饰的光纤. 用扫描电子显微镜和光谱分析仪对样品的形貌、结构以及光学特性进行分析. 实验结果表明,粒径为640 nm、体积分数约为0.5%的SiO₂胶体微球溶液在60 ℃的情况下沉积,大约12 h后可得到质量较高的胶体光子晶体. 在SEM下,观察到端面的胶体晶体为面心立方(fcc)结构. 透射光谱证明,该结构在(111)面上     

折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外     

Active manipulation of the selective alignment by two laser pulses

This paper solves numerically the full time-dependent Schrõdinger equation based on the rigid rotor model, and proposes a novel strategy to determine the optimal time delay of the two laser pulses to manipulate the molecular selective alignment. The results illustrate that the molecular alignment generated by the first pulse can be suppressed or enhanced selectively, the relative populations of even and odd rotational states in the final rotational wave packet can be manipulated selectively by precisely inserting the peak of the second laser pulse at the time when the slope for the alignment parameter by the first laser locates a local maximum for the even rotational states and a local minimum for the odds, and vice versa. The selective alignment can be further optimised by selecting the intensity ratio of the two laser pulses on the condition that the total laser intensity and pulse duration are kept constant.     

Role of buffer layer in electronic structures of iron phthalocyanine molecules on Au(111)

We investigate the electronic structures of one and two monolayer iron phthalocyanine (FePc) molecules on Au(111) surfaces. The first monolayer FePc is lying flat on the Au(111) substrate, and the second monolayer FePc is tilted at ～15° relative to the substrate plane along the nearest neighbour [101^-] direction with a lobe downward to the central hole of the unit cell in the first layer. The structural information obtained by first-principles calculations is in agreement with the experiment results. Furthermore, it is demonstrated that the electronic structures of FePc molecules in one-monolayer FePc/Au(111) system are perturbed significantly, while the electronic structures of FePc molecules in the second monolayer in two-monolayer FePc/Au(111) system remain almost unchanged due to the screening of the buffer layer on Au(111).     

Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

The anomalous radiation force of light on a left-handed material

This paper derives the force of the electromagnetic radiation on left-handed materials (LHMs) by a direct application of the Lorentz law of classical electrodynamics. The expressions of radiation force are given for TE-polarised and TM-polarised fields. The numerical results demonstrate that electromagnetic waves exert an inverse lateral radiation force on each edge of the beams, that is, the lateral pressure is expansive for TE-polarised beams and compressive for TM-polarised beams. The investigation of the radiation force will provide insights into the fundamental properties of LHMs and will provide to better understanding of the interaction of light with LHMs.     

Modelling the effect of wave overtopping on nearshore hydrodynamics and morphodynamics around shore-parallel breakwaters

Wave overtopping nearshore coastal structures, such as shore-parallel breakwaters, can significantly alter the current circulation and sediment transport patterns around the structures, which in turn affects the formation of tombolos and salients in the nearshore area. This paper describes the implementation of a wave overtopping module into an existing depth-averaged coastal morphological mode: COAST2D and model applications to investigate the effect of wave overtopping on the hydrodynamics and morphodynamics around a group of shore-parallel breakwaters. The hydrodynamic aspects of the model were validated against a series of laboratory conditions. The model was then applied to a study site at Sea Palling, Norfolk, UK, where 9 shore-parallel segmented breakwaters including 4 surface-piercing and 5 low-crested breakwaters are present, for the storm conditions in Nov 2006. The model results were compared with laboratory data and field measurements, showing a good agreement on both hydrodynamics and morphological changes. Further analysis of wave overtopping effect on the nearshore hydrodynamics and morphodynamics reveals that wave overtopping has significant impacts on the nearshore circulation, sediment transport and the resulting morphological changes within such a complex breakwater scheme under the storm and macro-tide conditions. The results indicate the importance of including the wave overtopping in modelling nearshore morphodynamics with the presence of coastal structures.