Colluvial sedimentation in a hyperarid setting (Atacama Desert,northern Chile): Geomorphic controls and stratigraphic facies variability

Research on colluvial depositional systems has recently emphasized periglacial and high‐altitude settings, and the relations between Quaternary slope stratigraphy and climate change. This article examines the role of variable slope morphology, surface hydrology and microclimate in controlling colluvial sedimentation along a coastal tract of the hyperarid Atacama Desert in northern Chile. Direct accessibility of active surfaces is accompanied by uninterrupted stratigraphic exposures along the base of slopes, allowing direct comparisons between surface processes and the resulting sedimentary record. Four slope sectors are identified, based on differences in morphology and processes over active surfaces. Colluvial sedimentation is controlled by complex interactions of slope gradients and profiles, exposure to dominant winds, and potential runoff pathways, which vary considerably between different sectors. Major differences are evident between these hyperarid deposits and slope sedimentation in periglacial and temperate settings, including the complete absence of pedogenic activity and clay minerals; the volume of aeolian deposits and their role in controlling processes which redistribute sediment downslope, extending colluvial aprons; and the occurrence of runoff processes only where favoured by particular topographic configurations. Depositional surfaces range from steep talus cones, to debris‐flow‐dominated and aeolian‐dominated colluvial aprons, to an aeolian ramp subject to reworking by mass flows and flash floods. Consequently, facies associations and architectures at outcrop are highly variable and highlight the importance of spatial variations in slope morphology and processes in producing distinct, coeval colluvial stratigraphies within a single environmental context. Discrepancies between active processes and the corresponding stratigraphic signatures are also evident in some sectors; for example, preservation of alluvial and aeolian facies in stratigraphic sections does not always reflect the dominant processes over active slopes. Together with the spatial variability in processes and deposits along these slopes, this suggests that caution is required when extracting palaeoenvironmental information from analyses of colluvial successions.     

Analysis of anisotropy of magnetic susceptibility in iron-oolitic beds: a potential tool for paleocurrent identification

A combined sedimentological, shape-preferred orientation and anisotropy of magnetic susceptibility (AMS) analysis has been performed at the Arroyofrío Bed (Callovian–Oxfordian boundary level) in the locality of Moneva (Iberian Range, NE Spain). The Arroyofrío bed is a widespread iron-ooid limestone interval forming a condensed sequence. The present study has focused on the analysis of the potential presence of a preferred ooid orientation at the Arroyofrío bed. The obtained data show that ooids were originally ellipsoidal and had an imbricate disposition with respect to the bedding/lamination surface. The main ooid orientation within the bedding plane shows a NNE–SSW trend. Results of AMS analyses show a magnetic foliation parallel or slightly imbricated with respect to bedding and magnetic lineation parallel to the main ooid orientation. Magnetic mineralogy of studied samples shows that AMS is mainly controlled by magnetite with minor contributions of hematite and paramagnetic minerals (that can reach contributions of 35 %). The analyzed ooids show axial ratios between 1.4 and 2.8 (intrinsic anisotropy), while the anisotropy of their distribution shows lower anisotropies (e.g., Rs = 1.15) or very low values of the anisotropic magnetic parameters (e.g., P′ < 1.01). Sedimentary texture, matrix features, bioturbation and fossil content influenced both ooid main orientation and the magnetic fabric. Magnetic lineation and main orientation of long ooid axes are transverse to the inferred coastline in the studied area and parallel to the expected paleocurrent direction with respect to the Ejulve-Maestrazgo paleogeographic high. The direct correlation between AMS magnetic lineation and the ooid analysis permits to demonstrate that the paleocurrent imprint can be recorded by means of AMS despite the highly ferromagnetic context fabric and at coarse deposits. Obtained results support the interest and reliability of AMS to unravel paleocurrent imprints for paleogeographic reconstructions.     

Anthropogenic debris on beaches in the SE Pacific (Chile): Results from a national survey supported by volunteers

Anthropogenic marine debris (AMD) is an ubiquitous problem, which has motivated public participation in activities such as beach surveys and clean-up campaigns. While it is known that beaches in the SE Pacific are also affected by this problem, the quantities and types of AMD remain largely unknown. In the context of an outreach project, volunteers (1500 high-school students) participated in a nation-wide survey of AMD on 43 beaches distributed randomly along the entire Chilean coast (18°S to 53°S). The mean density of AMD was 1.8 items m⁻² and the major types were plastics, cigarette butts and glass. Densities in central Chile were lower than in northern and southern Chile, which could be due to different attitudes of beach users or to intense beach cleaning in central regions. We suggest that public participation in surveys and cleaning activities will raise awareness and thereby contribute to an improvement of the situation.     

Volcanoes in the pre-Columbian life,legend, and archaeology of Costa Rica (Central America)

Costa Rica is located geographically in the southern part of the Central American Volcanic Front, a zone where interaction between the Mesoamerican and South American cultures occurred in pre-Columbian times. Several volcanoes violently erupted during the Holocene, when the first nomadic human hunters and later settlers were present. Volcanic rocks were the most important geo-resource in making artifacts and as construction materials for pre-Columbian inhabitants. Some pottery products are believed to resemble smoking volcanoes, and the settlements around volcanoes would seem to indicate their influence on daily life. Undoubtedly, volcanic eruptions disrupted the life of early settlers, particularly in the vicinity of Arenal and Irazú volcanoes, where archaeological remains show transient effects and displacement caused by periodical eruptions, but later resilient occupations around the volcanoes. Most native languages are extinct, with the exception of those presently spoken in areas far away from active volcanoes, where no words are related to volcanic phenomena or structures. The preserved legends are ambiguous, suggesting that they were either produced during the early Spanish conquest or were altered following the pre-Columbian period.     

Characterization of the manganese oxide produced by pseudomonas putida strain MnB1

Manganese oxides form typically in natural aqueous environments via Mn(II) oxidation catalyzed by microorganisms, primarily bacteria, but little is known about the structure of the incipient solid-phase products. The Mn oxide produced by a Pseudomonas species representative of soils and freshwaters was characterized as to composition, average Mn oxidation number, and N₂ specific surface area. Electron microscopy, X-ray diffraction, and X-ray absorption near edge structure spectroscopy were applied to complement the physicochemical data with morphological and structural information. A series of synthetic Mn oxides also was analyzed by the same methods to gain better comparative understanding of the structure of the biogenic oxide. The latter was found to be a poorly crystalline layer type Mn(IV) oxide with hexagonal symmetry, significant negative structural charge arising from cation vacancies, and a relatively small number of randomly stacked octahedral sheets per particle. Its properties were comparable to those of δ-MnO₂ (vernadite) and a poorly crystalline hexagonal birnessite (“acid birnessite”) synthesized by reduction of permanganate with HCl, but they were very different from those of crystalline triclinic birnessite. Overall, the structure and composition of the Mn oxide produced by P. putida were similar to what has been reported for other freshly precipitated Mn oxides in natural weathering environments, yielding further support to the predominance of biological oxidation as the pathway for Mn oxide formation. Despite variations in the degree of sheet stacking and Mn(III) content, all poorly crystalline oxides studied showed hexagonal symmetry. Thus, there is a need to distinguish layer type Mn oxides with structures similar to those of natural birnessites from the synthetic triclinic variety. We propose designating the unit cell symmetry as an addition to the current nomenclature for these minerals.     

Partial Melting and Counterclockwise P T Path of Subducted Oceanic Crust (Sierra del Convento Melange, Cuba)

Partial melting of subducted oceanic crust has been identifiedin the Sierra del Convento mélange (Cuba). This serpentinite-matrixmélange contains blocks of mid-ocean ridge basalt (MORB)-derivedplagioclase-lacking epidote ± garnet amphibolite intimatelyassociated with peraluminous trondhjemitic–tonalitic rocks.Field relations, major element bulk-rock compositions, mineralassemblages, peak metamorphic conditions (c. 750°C, 14–16kbar), experimental evidence, and theoretical phase relationssupport formation of the trondhjemitic–tonalitic rocksby wet melting of subducted amphibolites. Phase relations andmass-balance calculations indicate eutectic- and peritectic-likemelting reactions characterized by large stoichiometric coefficientsof reactant plagioclase and suggest that this phase was completelyconsumed upon melting. The magmatic assemblages of the trondhjemitic–tonaliticmelts, consisting of plagioclase, quartz, epidote, ±paragonite, ± pargasite, and ± kyanite, crystallizedat depth (14–15 kbar). The peraluminous composition ofthe melts is consistent with experimental evidence, explainsthe presence of magmatic paragonite and (relict) kyanite, andplaces important constraints on the interpretation of slab-derivedmagmatic rocks. Calculated P–T conditions indicate counterclockwiseP–T paths during exhumation, when retrograde blueschist-faciesoverprints, composed of combinations of omphacite, glaucophane,actinolite, tremolite, paragonite, lawsonite, albite, (clino)zoisite,chlorite, pumpellyite and phengite, were formed in the amphibolitesand trondhjemites. Partial melting of subducted oceanic crustin eastern Cuba is unique in the Caribbean realm and has importantconsequences for the plate-tectonic interpretation of the region,as it supports a scenario of onset of subduction of a youngoceanic lithosphere during the early Cretaceous (c. 120 Ma).The counterclockwise P–T paths were caused by ensuingexhumation during continued subduction. KEY WORDS: amphibolite; Cuba; exhumation; partial melting; trondhjemite; subduction     

Residual Exchange Flows in Subtropical Estuaries

Observations of residual exchange flows at the entrance to four subtropical estuaries, two of them semiarid, indicate that these flows are mainly tidally driven, as they compare favorably with theoretical patterns of tidal residual flows. In every estuary examined, the tidal behavior was that of a standing or near-standing wave, i.e., tidal elevation and tidal currents were nearly in quadrature. The pattern of exchange flow that persisted at every estuary exhibited inflow in the channel and outflow over the shoals. Curiously, but also fortuitously, this pattern coincides with the exchange pattern driven by density gradients in other estuaries. The tidal stresses and the residual elevation slopes should be the dominant mechanisms that drive such tidal residual pattern because the Stokes transport mechanism is negligible for standing or near-standing waves. Time series measurements from the semiarid estuaries showed fortnightly modulation of the residual flow by tidal forcing in such a way that the strongest net exchange flows developed with the largest tidal distortions, i.e., during spring tides. This modulation is opposite to the modulation that typically results in temperate estuaries, where the strongest net exchange flows tend to develop during neap tides. The fortnightly modulation on tidal residual currents could be inferred from previous theoretical results because residual currents arise from tidal distortions but is made explicit in this study. The findings advanced herein should allow the drawing of generalities about exchange flow patterns in subtropical estuaries where residual flows are mainly driven by tides.     

Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.     

Natural Arsenic Attenuation via Metal Arsenate Precipitation in Soils Contaminated with Metallurgical Wastes: I. Wet Chemical and Thermodynamic Evidences

Arsenic from natural and anthropogenic sources is a worldwide contaminant of aqueous environments, such as groundwater and soils. The present investigation was performed on Mexican soils contaminated with residues from metallurgical processes that have shown a natural As attenuation. Experimental aqueous arsenic extractions in these were successfully simulated for almost half of the soil samples using a database updated for all known metal arsenate formation constants, revealing the predominance of solubility-controlled As mobility via Pb, mixed Pb–Cu, and Ca arsenate solid formation. The relatively low total Fe/As ratios (2–13 w/w) present in the soils studied, together with the high and equivalent contents of As, Pb, and Cu in these, favor the precipitation process over As(V) adsorption to Fe oxides, despite a 2% average Fe content in the soils studied. Under these conditions bicarbonate was found to be a highly unsuitable extractant due to its indirect As release from the solid arsenates, via heavy metal carbonate precipitation processes.