Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

An in-situ integrated suspended sediment stream sampler (IS3)

An inexpensive, lightweight stream sampler is described which provides a method for continuous collection of suspended stream sediments. The IS^3* sampler collects integrated suspended stream samples, and because the sampler relies on basic sedimentation principles, it can be deployed to collect suspended sediment stream samples for environmental studies or geochemical exploration in remote areas. The sampler trapped from 0.45 to 1.2 g of dry sediment during 7- to 8-d field tests conducted during 1985.     

Seeing Conditions at Sutherland. Results of the 1992/93 seeing campaign

In order to decide whether the seeing conditions at SAAO/Sutherland justify the erection of a 3.5 m telescope and also to compare Sutherland with the Gamsberg/Namibia site, a seeing campaign covering 15 months has been carried out. For direct comparison with the results of the seeing campaign at Gamsberg twenty years before the same QUESTAR telescope was employed. The seeing is determined by the scattering of the star-trail exposed on a film in the focal plane of the telescope. The campaign commenced in February 1992. Up to May 1993, data for 204 nights, that is 47.3% of the total number of nights, were collected. Due to wind speeds above 30 km h^-1, 25 out of the 204 nights were not considered in the final reduction. The useful 179 nights are evenly distributed over the campaign period. The median seeing value for the whole period is = 0.52. There are differences during the year: the best season gives = 0.42, the worst = 0.67. Each night was divided into three intervals, although data for each of the three intervals were not always available. Generally, there is an improvement in the seeing during the course of a night. The results are compared to the seeing values of Gamsberg/Namibia and ESO/La Silla.     

The Total Irradiance Monitor (TIM): Instrument Design

The Total Irradiance Monitor (TIM) instrument is designed to measure total solar irradiance with an absolute accuracy of 100 parts per million. Four electrical substitution radiometers behind precision apertures measure input radiant power while providing redundancy. Duty cycling the use of the radiometers tracks degradation of the nickel-phosphorous absorptive black radiometer interiors caused by solar exposure. Phase sensitive detection at the shutter frequency reduces noise and simplifies the estimate of the radiometer's equivalence ratio. An as-designed uncertainty budget estimates the instrument's accuracy goal. The TIM measurement equation defines the conversion from measured signal to solar irradiance.     

Stable isotope paleohydrology and chemostratigraphy of the Albian Wayan Formation from the wedge-top depozone,North American Western Interior Basin

Understanding of the role of atmospheric moisture and heat transport in the climate system of the Cretaceous greenhouse world represents a major challenge in Earth system science.Stable isotopic paleohydrologic data from mid-Cretaceous paleosols in North America,from paleoequatorial to paleoArctic latitudes,have been used to constrain the oxygen isotope mass balance of the Albian hydrologic cycle.Over the range from 40°-50°N paleolatitude,sideritic paleosols predominate,indicating paleoenvironments with positive precipitation-evaporation(P-E)balances.Local exceptions occur on leeward side of the Sevier Orogen,where calcic paleosols in the wedge-top depozone record paleoenvironments with negative P-E balances in the orographic rain shadow.Stratigraphic sections in the Wayan Formation of Idaho(WF)were sampled from the wedge-top depozone.The units consist of stacked m-scale mudstone paleosols separated by m-scale sandstone-siltstone beds.Sections were sampled for organic carbon isotope profiles,and B-horizons from 6 well-developed paleosols were sampled for detrital zircons to determine maximum depositional ages.The first of these from the WF has produced a U-Pb concordia age of 101.0±1.1 Ma.This same WF section has produced a stratigraphic trend of upwardly decreasingδ~(13)C values ranging from-24‰upwards to-27‰VPDB,suggesting correlation to the late Albian C15 C-isotope segment.Pedogenic carbonates from the WF principally consist of micritic calcite,with carbon-oxygen isotope values that array along meteoric calcite lines(MCLs)withδ~(18)O values that range from-9.47‰up to-8.39‰VPDB.At approximately 42°N paleolatitude,these MCL values produce calculated paleoprecipitation values of-8.12‰to-7.04‰VSMOW,a range that is consistent with the estimates produced from other proxies at the same paleolatitudes across North America.These results indicate that despite the orographic rain shadow effect,the processes of meridional atmospheric moisture transport in this locale were similar to those in more humid mid-latitude paleoenvironments elsewhere in the continent.     

Numerical Modeling of Ice Fog in Interior Alaska Using the Weather Research and Forecasting Model

An ice microphysics parameterization scheme has been modified to better describe and understand ice fog formation. The modeling effort is based on observations in the Sub-Arctic Region of Interior Alaska, where ice fog occurs frequently during the cold season due to abundant water vapor sources and strong inversions existing near the surface at extremely low air temperatures. The microphysical characteristics of ice fog are different from those of other ice clouds, implying that the microphysical processes of ice should be changed in order to generate ice fog particles. Ice fog microphysical characteristics were derived with the NCAR Video Ice Particle Sampler during strong ice fog cases in the vicinity of Fairbanks, Alaska, in January and February 2012. To improve the prediction of ice fog in the Weather Research and Forecasting model, observational data were used to change particle size distribution properties and gravitational settling rates, as well as to implement a homogeneous freezing process. The newly implemented homogeneous freezing process compliments the existing heterogeneous freezing scheme and generates a higher number concentration of ice crystals than the original Thompson scheme. The size distribution of ice crystals is changed into a Gamma distribution with the shape factor of 2.0, using the observed size distribution. Furthermore, gravitational settling rates are reduced for the ice crystals since the crystals in ice fog do not precipitate in a similar manner when compared to the ice crystals of cirrus clouds. The slow terminal velocity plays a role in increasing the time scale for the ice crystals to settle to the surface. Sensitivity tests contribute to understanding the effects of water vapor emissions as an anthropogenic source on the formation of ice fog.     

Validation of the SCEC Broadband Platform simulations for tall building risk assessments considering spectral shape and duration of the ground motion

Earthquake simulation technologies are advancing to the stage of enabling realistic simulations of past earthquakes as well as characterizations of more extreme events, thus holding promise of yielding novel insights and data for earthquake engineering. With the goal of developing confidence in the engineering applications of simulated ground motions, this paper focuses on validation of simulations for response history analysis through comparative assessments of building performance obtained using sets of recorded and simulated motions. Simulated ground motions of past earthquakes, obtained through a larger validation study of the Southern California Earthquake Center Broadband Platform, are used for the case study. Two tall buildings, a 20‐story concrete frame and a 42‐story concrete core wall building, are analyzed under comparable sets of simulated and recorded motions at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Spectral shape and significant duration are explicitly considered when selecting ground motions. Considered demands include story drift ratios, floor accelerations, and collapse response. These comparisons not only yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. This study highlights the utility of physics‐based simulations, and particularly the Southern California Earthquake Center Broadband Platform as a useful tool for engineering applications.     

Numerical experiments on the onset of convective instability in the Earth's mantle

Summary. A simplified model of convection in the mantle is used to investigate the transient effect of cooling a fluid layer from above, The model, representing the mantle overlain by the lithosphere, consists of a two-dimensional fluid layer overlain by a solid conducting lid. The initial temperature of both layers is the same, with the top surface of the lid kept at 0°C throughout. We observe the onset of small-scale flow in the model. In the absence of internal heating the behaviour of the system is controlled by the Rayleigh number, R , and the ratio of the thicknesses of the two layers, a . The onset time of convection as defined by reference to conduction temperature profiles is related simply to a boundary layer critical Rayleigh number. The mean temperature profiles for the convection model are also compared with the observed depth—age relation for oceanic lithosphere and the results are used to estimate the viscosity of the mantle.     

Using existing scientific capacity to set targets for ecosystem-based management: A Puget Sound case study

Human actions have altered the structure and function of coastal ecosystems worldwide. In many locations, the overall portfolio of goods, cultural amenities, and supporting services provided by the marine environment has deteriorated. Ecosystem-based management (EBM) offers significant promise for addressing these issues because it is a comprehensive and integrated approach designed to reconcile conflicts and trade-offs among users of marine resources. A key step in the implementation of EBM is the establishment of target reference levels, or desired states, for indicators that reflect the status of the ecosystem. This paper reviews five approaches, borrowed from a variety of disciplines, to establish target reference levels for EBM. The approaches include the use of existing reference levels, reference directions, and reference levels based on nonlinear functional relationships, baselines, or social norms. Each approach is particularly suitable for EBM because it can be used alone or in combination with others to contextualize status for a diverse suite of ecosystem goals influenced by a wide variety of human activities. Perhaps most importantly, these approaches offer a prospectus for moving forward with EBM by using readily available information, motivating existing scientific capacity, and addressing trade-offs implicit to the setting of targets. This last point is articulated via examples of how each type of reference level might be applied in Puget Sound, WA, USA, where the efforts of scientists, managers, and policy makers have aligned recently in the interest of EBM implementation.     

Hydrothermal Quartz Vein Formation, Revealed by Coupled SEM-CL Imaging and Fluid Inclusion Microthermometry: Shuteen Complex, South Gobi, Mongolia

Abstract. Scanning electron microscopy-cathodoluminescence (SEM-CL) imaging of vein quartz in the Cu-mineralised, Shuteen Complex (South Gobi, Mongolia) has revealed a complex history of crystal growth, dissolution and microfracture healing, associated with several hydrothermal events that could not be detected using other observational techniques (e.g. transmitted/reflected light microscopy, back-scattered electron imaging, or secondary electron imaging).
The quartz initially grew as CL-bright/grey crystals in a 345±30C liquid reservoir, as inferred by the analysis of primary liquid fluid inclusions (average Th of 343C; 6.6∼7.7 wt% NaCl_eq). Quartz precipitation occurred at the edge of the crystals as reservoir fluids cooled to 260±25C, as indicated by micron-scale CL-dark/CL-bright quartz growth bands containing abundant fluid inclusions (with an average T_h values of 261C). Pressure fluctuations were the likely cause of dissolution, as SEM-CL imaging reveals the quartz have corroded or rounded crystal edges, and precipitation of later quartz into open space. SEM-CL imaging shows the quartz contains healed microfractures that trapped low salinity fluids (3.9 wt% NaC1_eq) with Th values of 173±15C.
SEM-CL imaging provides a means of deciphering the thermal and chemical evolution of the fossil Shuteen hydrothermal system, and the nature of hydrothermal quartz vein-forming processes, by facilitating the correlation of distinct fluid inclusion populations and their relative chronology, with specific hydrothermal events.