RbSr and KAr ages of paleozoic glauconites from Ohio—Indiana and Missouri,U.S.A.

Glauconite pellets from the Lower Silurian Brassfield Formation on both limbs of the Cincinnati Arch in Ohio and Indiana give a RbSr age of 370 ± 11 Ma, which is substantially younger than the stratigraphic age of the formation. The age is concordantcwith conventional KAr ages of 355 ± 6 and 368 ± 5 Ma for two of the same glauconites. Concordant ages were also obtained from the Viburnum Trend in Missouri, where glauconite pellets from the Davis Formation in an ore-zone collapse structure into the underlying Bonneterre Formation give a RbSr age of 387 ± 21 Ma and conventional KAr ages of 368 ± 5 and 369 ± 5 and 369 ± 5 Ma. A third suite of glauconite from the Bonneterre Formation in the Old Lead Belt ～ 10 km from the nearest ore body has given a RbSr age of 423 ± 7 Ma and slightly older conventional KAr ages of 434 ± 6, 445 ± 6 and 441 ± 11 Ma.Because these glauconite-bearing rocks have been buried to depths of less than 1 km, thermal resetting of the RbSr and KAr systematics appears unlikely. The initial ${}^{87}\text{Sr}{}^{86}\text{Sr}$ ratios of the RbSr isochrons are similar to the ratios for vein- and vug-filling dolomite and calcite. This is consistent with resetting of the RbSr and KAr systems during diagenetic changes which included the isotopic equilibration (perhaps by cation exchange) of the Sr in the glauconite with that in the diagenetic and Mississippi Valley-type ore fluids. This interpretation implies that the age of the Mississippi Valley-type mineralization in the Viburnum Trend is Devonian rather than Carboniferous—Permian as has been inferred from paleomagnetic measurements.Cation-exchange experiments with a dilute Sr-bearing solution and an artificial oilfield brine indicate that glauconite adsorbs large amounts of Sr, some of which is sufficiently strongly attached to the glauconite lattice as to resist leaching with ammonium acetate. The introduction of this strongly attached Sr may be the first step in the resetting of the RbSr systematics of glauconite by cation exchange.     

Spatial variability in soil moisture as predicted from airborne thematic mapper (ATM) data

In the first part of this project, the extent to which moisture content of alluvial soils could be predicted from imagery derived from an airborne thematic mapper (ATM) was investigated. From sampling done on the same day as the flight, it was found that digital numbers derived from the thermal channel (waveband 11) were strongly correlated with gravimetric moisture content. From sampling three fields of contrasting land cover, the relationship between waveband 11 values and moisture content was found to be independent of land cover type. Spatial variation in waveband 11 values and thus moisture content were related to palaeochannel patterns on the alluvial land. This was investigated by deriving variograms for long transects from each of the three investigated fields. The range and sills of the variograms are shown to express the nature and pattern of palaeochannels. By the application of such geostatistical techniques, high resolution imagery can thus be used to quantify palaeochannel characteristics on alluvial land.     

Mt. Pelée, martinique: may 8 and 20, 1902, pyroclastic flows and surges

The distribution, stratigraphic relationships and fragmental components of the May 8 and 20, 1902, pyroclastic flows from Mt. Pelée, Martinique, together with eyewitness accounts, suggest the following explanation for those eruptions. The eruptions were vertically directed magmatic (perhaps initiated phreatically), and contained abundant juvenile lithics from congealed magma of the dome and neck. This resulted in a two-part eruption column having (1) a dense, lithic-charged part which collapsed into the crater and flowed out of a pre-existing notch in its side, giving rise to pyrochlastic flows, and (2) a magmatically derived column containing gases, juvenile vitric material and crystals which largely by-passed the neck and dome and escaped into the atmosphere. All of the energy of the flows was apparently focused through the notch. They emerged fully turbulent and flowed down Rivière Blanche. Gravity segregation of large and abundant fragments soon resulted in a dense, high-concentration, poorly fluidized block-and-ash flow confined to the valley, leaving above a fully turbulent, high-energy ash-cloud surge. As the ash-cloud surge moved down the mountain, it continued to expand outward. The process of gravity segregation continued as the ash-cloud surge expanded, resulting in secondary block-and-ash underflows. Toward St. Pierre, the secondary block-and-ash flows developed on a gently sloping upland surface 100 m or more above the valley of Rivière Blanche. The turbulent, fragment-depleted surges above the secondary block-and-ash flows maintained sufficient energy to devastate the landscape outward to about 3000 m, including St. Pierre. The surges refracted around obstacles and in one place, moved up a small valley in a direction opposite to the main flows.     

The scaling of flow in vegetative structures

Sensible heat flux data obtained from the U.S. Environmental Protection Agency's Regional Air Pollution Study in St. Louis, Missouri are presented and discussed. Large spatial variations exist in heat flux on both a land-use scale and the urban scale. Arguments based upon empirical data and sampling theory show that estimates of heat flux representative of an upwind fetch l _x require a minimum observation height proportional to z ^3/4. The influence of advection on the magnitude of the heat flux is also explored for both the urban and sub-urban or land-use scales. The data clearly indicate that advection can strongly modulate and even dominate the vertical heat flux above surfaces in areas which maintain large horizontal temperature gradients. The advection contribution is positive for cold air advection and negative for warm air advection, and may result from either the urban heat island or land-use mesoscale features. The depth of advective influence is directly proportional to the horizontal scale of the phenomenon and inversely proportional to horizontal temperature gradient.     

Modelling sediment transport as a moving wave — The transfer and deposition of mining waste

The movement of slugs of bedload from a discrete input point down a river has proved difficult to model using conventional finite-difference formulations of equations of motion. A model is proposed which makes explicit allowance for the mean sediment velocity and, through a dispersion coefficient, the distribution of sediment velocity about the mean. A second comparative model uses the normal mass conservation or sediment transport continuity approach. The models have been tested over a 43-month period using data from seven monitored cross-sections of the Kawerong River on Bougainville Island, Papua New Guinea, a system which receives waste from a large copper mine. The dispersion model performs considerably better than the mass-conservation model.     

Hydrogeology of the Winnipeg Formation in Manitoba, Canada

The Winnipeg Formation is the basal sedimentary unit throughout much of southern and central Manitoba, Canada, where it forms a regional aquifer over most of its extent. This aquifer is an important source of water in southeastern Manitoba and in Manitoba’s Interlake area, but in most other areas, groundwater within the aquifer is saline. Chemical and isotopic evidence indicate the presence of groundwaters of three different origins: (1) basin brines; (2) modern meteoric recharge; and (3) subglacial recharge that occurred during the late Pleistocene. Hydraulic head and sedimentary facies distributions indicate that the flow system in parts of the area is not in a state of equilibrium and saline waters will encroach on areas currently occupied by freshwater in some areas, while in other areas, freshwater will replace saline water. These features must be considered in groundwater resource management, as groundwater withdrawals will likely hasten these processes.

---

Resumen La Formación Winnipeg es la unidad sedimentaria basal en la mayor parte de Manitoba central, Canadá, donde forma un acuífero regional en la mayor parte de su extensión. Este acuífero es una fuente importante de agua en el Sureste de Manitoba y el área de entrelagos de Manitoba, pero en la mayoría de las otras zonas del acuífero, el agua es salina. Las evidencias químicas e isotópicas indican que existen aguas subterráneas de tres orígenes diferentes: (1) salmueras de cuenca; (2) recarga meteórica actual; y (3) recarga subglacial ocurrida durante el Pleistoceno Superior. Los niveles piezométricos y la distribución de las facies sedimentarias indican que el sistema de flujo no se encuentra en estado de equilibrio en parte del área y las aguas salinas irán invadiendo áreas actualmente ocupadas con aguas dulces, mientras que en otras zonas el agua dulce está reemplazando al agua salina. Estos hechos deben ser considerados en la gestión de las aguas subterráneas como recurso, ya que las extracciones de agua acelerarán probablemente estos procesos.

---

Résumé La Formation de Winnipeg est l’unité sédimentaire de base sur la plus grande partie du Sud et du centre du Manitoba au Canada, où elle forme un aquifère régional sur pratiquement toute son extension. Cet aquifère représente une ressource en eau importante dans le Sud-Est du Manitoba et dans les zones d’entre les lacs, mais salée dans la plus part des autres zones. Les indications isotopiques et chimiques permettent de distinguer trois différentes origines des eaux souterraines: (1) les saumures de bassin; (2) la recharge météoritique moderne; (3) la recharge sub-glaciaire qui est apparue durant le Pléistocène récent. Les charges hydrauliques et la distribution des faciès sédimentaires indiquent que le système d’écoulement dans certaines zones n’est pas dans un état d’équilibre et que les eaux salées empièteront sur des zones d’eau douce, tandis que dans d’autres zones l’eau douce remplacera les eaux salées. Ces aspects doivent être considérés dans la gestion des ressources en eau souterraine, car le prélèvement des eaux souterraines pourrait accentuer ces processus.

     

Transport and deposition of large woody debris in streams: a flume experiment

Large woody debris (LWD) is an integral component of forested streams of the Pacific Northwest and elsewhere, yet little is known about how far wood is transported and where it is deposited in streams. In this paper, we report the results of flume experiments that examine interactions among hydraulics, channel geometry, transport distance and deposition of floating wood. These experiments were carried out in a 1.22-m-wide×9.14-m-long gravel bed flume using wooden dowels of various sizes as surrogate logs. Channel planforms were either self-formed or created by hand, and ranged from meanders to alternate bars. Floating pieces tended to orient with long axes parallel to flow in the center of the channel. Pieces were deposited where channel depth was less than buoyant depth, typically at the head of mid-channel bars, in shallow zones where flow expanded, and on the outside of bends. We hypothesize that the distance logs travel may be a function of the channel's debris roughness, a dimensionless index incorporating ratios of piece length and diameter to channel width, depth and sinuosity. Travel distance decreased as the ratio of piece length to both channel width and radius of curvature increased, but the relative importance of these variables changed with channel planform. Large pieces can move further than our debris roughness models predict if greater than 50% of the active channel area is deeper than the buoyant depth of the piece, or if momentum is high enough to carry pieces across shallows. Our debris roughness model allows first-order prediction of the amount of wood transport under various channel geometries.     

Calibrate yourself to your data! A vital first step in seismic interpretation

Stratigraphic, reservoir and fluid interpretation demands a thorough understanding of the seismic-to-well tie. Data phase, polarity and tuning effects significantly influence this tie and are often poorly understood. By relating seismic character to known subsurface geology, the interpreter should gain better understanding and be able to calibrate himself to his data. This is an important preliminary stage in any seismic interpretation beyond structure.