Mass transport triggered by heavy rainfall: the role of endorheic basins and epikarst in a regional karst aquifer

This study aims at recognizing the mechanisms of mass transport between the karst surface and the saturated zone in a morphostructural relief of the Mesozoic karst carbonate platform of Murgia (Puglia, Southern Italy). The large dimension of the karst aquifer, the regional scale of the flow system, the boundary condition constituted by the sea, and the lack of freshwater springs constrain to the use of wells as monitoring points and limit the study area to the recharge area comprising 986 endorheic basins. The concentrations of non‐reactive tracers (nitrates) in the waters of autogenic recharge (from endorheic basins) have been modeled through the evaluation of effective infiltration, land use, and nitrogen surplus, with reference to a time window, which includes a low precipitation period followed by significant rainfall events. The comparison between the modeled nitrate concentrations and the nitrate concentrations measured in ground waters, coupled with the analysis of groundwater chemograms and records of hydraulic heads (all referred to the same time window), allows inferring the mechanism of mass transport between the karst surface and the groundwater table. The mass transport conceptual model requires the presence of the epikarst. The infiltration of significant rainfall in the endorheic basins after a low precipitation period displaces waters stored in the epikarst toward the saturated zone. Ground waters in the post‐event period show higher concentrations of nitrates, lower concentrations of total organic carbon, and higher Mg/Ca ratios than both those of the pre‐event period and the autumn‐winter recharge period. The post‐event recharge from epikarst storage determines a transient hazard of groundwater pollution with a time lag from the occurrence of the heavy rainfall.     

Shear wave propagation along infinite slopes: A theoretically based numerical study

In this paper, the seismic response of ‘infinitely’ long slopes is numerically analysed via the formulation of a 1D analytical/numerical model, in which the soil mechanical behaviour is assumed to be elasto‐perfectly viscoplastic and simple shear (SS) kinematical constraints are imposed. In order to simplify the problem, a theoretically based procedure to set up a fully 1D shear constitutive model is defined, within which the mechanical response of a multiaxial relationship is condensed. The use of a 1D shear constitutive model is aimed at reducing the number of unknowns and, therefore, the computational costs. In particular, the case of the Mohr–Coulomb yield criterion is considered, while an enhanced Taylor–Galerkin finite element algorithm is employed to simulate the seismic wave propagation within the soil stratum. The proposed ‘condensation’/calibration procedure captures both the ‘pseudo’‐hardening pre‐failure behaviour and the influence of dilation on the occurrence of strain‐localization, which characterize, under SS conditions, the static response of virgin perfectly plastic soils. The effectiveness of the conceived method is shown with reference to freshly deposited deposits, while, in the case of highly overconsolidated strata, some difficulties arise because of the brittle behaviour induced both by unloading and non‐associativeness. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic response of multiply connected primary-secondary systems

A method to evaluate the dynamic response of composite multiply connected primary-secondary systems is presented. For this purpose the nodal equations of motion of the composite system are given in ‘total’ and ‘relative’ coordinates. In the framework of the component-mode synthesis method a coordinate transformation, here defined as an admissible one, is used to reduce the nodal equations of motion. This coordinate transformation is theoretically and numerically compared with the coordinate transformation usually used in the literature, which generally gives larger errors with respect to the former when a reduced number of nodes is considered.     

Magma-clustering and galaxy-clustering: a comparison

The analogies between clustering processes in magmas and clustering ones in galaxies are pursued. By using reasonable assumptions about the properties of the fluids in magmas and in the Earth's mantle, it is shown that: (1) in both processes instabilities are formed by density fluctuations; (2) in both phenomena the process of clusters is of the hierarchical kind; (3) magmas and galaxies both exhibit a simultaneous superposition of mass, momentum and energy transports; (4) coalescence occurring in magmas can be considered the corresponding phenomenon to the close encounters in the galactic groups; and (5) vorticity of the Taylor Proudman type in magmatic systems can be regarded as the corresponding phenomenon to cannibalism in the galaxies. It is suggested that there is a single transport mechanism that may be universally applicable.     

Adaptive strategy of brackish-water fauna in pure and polluted waters

A comparative analysis of various brackish-water biotopes has indicated certain characteristics of the community structure, and the colonization and adaptation of various species to very different ecological situations. A large diversity of the fauna in the various biotopes has been ascertained, each of them showing peculiar properties. Together with species typical of these environments, there are many others, often until now never collected in brackish waters, which, according to different local situations, characterize and distinguish various situations. A comparison of the fauna between brackish waters and sea waters polluted by organic wastes point out to what degree adaptive strategies are analogous. Genetic variability of the organisms makes standardization of monitoring methods difficult in these unpredictable environments.     

Granulite-amphibolite facies metasediments from the Serre (Calabria,Southern Italy): their protoliths and the processes controlling their chemistry

In the northwestern Serre, a near continuous section through the Palaeozoic lower continental crust crops out. This paper deals with granulite facies metasedimentary rocks of this section. Fifty-five chemical analyses (major elements, Sc, V, Cr, Co, Ni, Rb, Sr, Y, Nb and Ba) are given. Chemical data indicate that the original sedimentary sequence was made up of arenites in the lower part and mainly Fe and Mg rich pelites in the upper part. The metapelites experienced anatexis and removal of some melt, whereas the meta-arenites suffered only incipient anatexis and became dehydration granulites. The various rock types display an overall relatively low K/Rb ratio due mainly to the stability of K- and Rb-retaining phases. A weighted mean composition of the fragment of the lower continental crust outcropping in the Serre has been established by integrating the chemical data for metasediments (55 analyses), metabasites (92 analyses) and dioritic and tonalitic gneisses (10 analyses) with the field data. This composition compared to the compositions of the bulk continental crust and of other sections considered as belonging to the lower crust, confirms the hypothesis that (1) the lower crust is heterogeneous, and (2) it is more basic than the continental crust.     

Middle-Late Pleistocene polycyclic evolution of a stable coastal area (southern Apulia, Italy)

The Otranto–Leuca coastal tract is marked by the presence of numerous sea caves placed close to present sea level. They are located generally at the back of a shore platform covered by a sequence of breccia deposits, marine sediments and speleothems. At Grotta di Masseria dell'Orte, marine cemented sands rest on a narrow shore platform at about 6.2 m above mean sea level and are covered by speleothems older than 185 ka. At Grotta del Diavolo, which is mostly filled by breccia deposits, three beach levels have been detected at about 3.0, 3.5 and 5.9 m above msl. They are either covered by or overlie speleothems that yield an U/Th age of 340, 78 ka and between 170.3 and 146.5, respectively. Geomorphological evidence and radiometric ages indicate that the area after a period of uplift has been tectonically stable since the last part of the Middle Pleistocene so that marine landforms close to the present shoreline underwent a polycyclic evolution. The sedimentary fills of sea caves formed during Middle-Late Pleistocene glacial stages, when arid or semiarid conditions promoted the removal of regolith and the development of thick breccia deposits. During Marine Isotope Stages (MIS) 9.3, 5.5 and 5.1, cave sediments were partially eroded whereas beach layers and related speleothems developed. These are, in fact, the only marine isotope stages marked by a sea level position which in this Mediterranean region was either close to, or slightly higher than, the present one.     

Installation of a vertical slurry wall around an Italian quarry lake: complications arising and simulation of the effects on groundwater flow

Slurry walls are non-structural barriers that are constructed underground to impede groundwater flow or manage groundwater control problems. The study area is in the Piemonte plain (Italy), close to the River Po. Quarrying works carried out below the piezometric surface created two big quarry lakes. The local groundwater system is characterized by a lower semi-confined aquifer, which is overlain by a semi-permeable bed of clayey peat (aquitard) and an upper unconfined aquifer. Locally, the peat fades away and the granulometry of this horizon becomes silty sandy. A planned enlargement of the quarry will increase the size and depth of the quarry lakes. So the aquitard bed between the two aquifers will be damaged, creating a mixing rate of groundwater. Such a procedure would not be compatible with the presence of two municipal wells upstream from the quarries. Consequently, the installation of a vertical diaphragm (slurry wall) is recommended to separate the aquifers and to act as a filter for the groundwater flowing from the unconfined to the semi-confined aquifer. To predict the consequences caused by the installation of the vertical diaphragm separating the unconfined aquifer and the semi-confined one, a specifically adjusted finite-difference model was used. The model showed a maximum rising of the water table equal to 12 cm, just upstream of the diaphragm and for a distance of about 100 m, and a maximum lowering of 2 cm just downstream of the diaphragm. However, the slurry wall would not cause any change in the piezometric head in the area where there are municipal wells and, hence, will not have any negative effect on the functionality of the municipal wells. Moreover, the migration of water from the unconfined aquifer through the vertical diaphragm will stimulate a series of attenuation and auto-depuration processes of eventual contaminants. These processes are due to the higher crossing time that the groundwater flow takes to go through the vertical barrier (t _a = 96.5 days, whereas for the horizontal semi-permeable layer t _a = 9.6 days). So, the vertical diaphragm can be a resolutive element, representing a mediation and separation factor between the unconfined and the semi-confined aquifers along the border of the quarrying areas, and a protective barrier for the water quality of the quarry lake and the semi-confined aquifer.