The Reticulatus method for shear strengthening of fair-faced masonry

This paper presents the results of several experimental campaigns recently carried out by the authors and devoted to the investigation of the mechanical performance of wall panels strengthened by applying repointing mortar and high strength stainless steel or composite cords. The reinforcement system, known as Reticulatus, allows the reinforcement of regular and irregular-shape masonry walls, when the fair-faced aspect must be kept. In the perspective of using this reinforcement method, this article summarizes the research that has been done so far, presenting new original test results and discussing the design procedures. Twenty-two square wall panels were loaded in their plane by means of a single point load acting through the panel’s diagonal. Experimental results are presented for four types of cord reinforcement using matched samples, reinforced and not. Increases in shear strength from 15 to 170 % were achieved for the strengthened panels. Each wall panel was loaded well into the lateral post-elastic regime and then unloaded. Experimental results were in good agreement with predictions from simple models which assume the wall panels to behave like a plate, neglecting the contribution of the repointing mortar, and accounting for the non-linear behavior of the masonry.     

Energetics of multiple oxides with spinel structure

A thermodynamic model for multiple oxides with spinel structure based on the atomistic approach (lattice energy, enthalpy, bulk modulus) and semiempirical estimates (heat capacity functions, entropy, thermal expansion) is presented. The model fits the experimental high temperature free energy values of the reference compounds, with a mean absolute error of 0.65 percent (19 values). The standard state stable configuration of most reference compounds is shown to be achieved at a local minimum in the free energy vs. degree of inversion function. This is interpreted as evidence of internal consistency of the model.     

A new set of integrals of motion to propagate the perturbed two-body problem

A formulation of the perturbed two-body problem that relies on a new set of orbital elements is presented. The proposed method represents a generalization of the special perturbation method published by Peláez et al. (Celest Mech Dyn Astron 97(2):131–150, 2007) for the case of a perturbing force that is partially or totally derivable from a potential. We accomplish this result by employing a generalized Sundman time transformation in the framework of the projective decomposition, which is a known approach for transforming the two-body problem into a set of linear and regular differential equations of motion. Numerical tests, carried out with examples extensively used in the literature, show the remarkable improvement of the performance of the new method for different kinds of perturbations and eccentricities. In particular, one notable result is that the quadratic dependence of the position error on the time-like argument exhibited by Peláez’s method for near-circular motion under the $J_{2}$ perturbation is transformed into linear. Moreover, the method reveals to be competitive with two very popular element methods derived from the Kustaanheimo-Stiefel and Sperling-Burdet regularizations.     

A quantitative approach to trace element and Sr isotope evolution in the Adamello batholith (northern Italy)

A development of De Paolo's mathematical procedure (1981) for magmatic AFC (Assimilation-Fractional Crystallization) processes is discussed with respect to both trace element and Sr isotopic ratio behaviours during the genesis and evolution of Adamello batholith (northern Italy). Resolution of a two equation-system (one relative to ⁸⁷Sr/⁸⁶Sr ratio variation in a magma generated by an AFC process, the other to its trace element content variations) gives the F (mass of magma at time t/mass of initial magma) and D (bulk partition coefficient) values, by which one can deduce the r (rate of assimilation/rate of crystallization) value during each step of magmatic evolution. This quantitative approach suggests that: 1) there was a common precursor magma for all the Adamello granitoids, with a Mg-rich tholeiitic composition; 2) each intrusive unit appears to have been generated by different extents of AFC; 3) the trace element distribution in the magma seems essentially influenced by mineral fractionation, rather than by the composition of the assimilated crustal material.     

Inclined K–Ar illite age spectra in brittle fault gouges: effects of fault reactivation and wall‐rock contamination

K–Ar clay fraction ages of brittle faults often vary with grain size, decreasing in the finer size fractions, producing an inclined age–grain‐size spectrum. K–Ar ages and mineralogical characterization of gouges from two normal faults in the Kongsberg silver mines, southern Norway, suggest that inclined spectra derived from brittle fault rocks reflect the mixing of inherited components with authigenic mineral phases. The ages of the coarsest and finest fractions constrain faulting at c. 260–270 Ma and reactivation around 200–210 Ma, respectively. This study demonstrates how wall‐rock contamination influences the K–Ar age of the coarsest size fractions and that authigenic illite and K‐feldspar can crystallize synkinematically under equivalent conditions and thus yield the same K–Ar ages.     

The Central Main Ethiopian Rift is younger than 8 Ma: confirmation through apatite fission‐track thermochronology

An isolated block of Precambrian basement rocks and Mesozoic sediments is exposed at Kella along the western margin of the Central Main Ethiopian Rift (MER), surrounded by Tertiary to Quaternary volcanic rocks. Apatite fission‐track thermochronology on two basement samples yielded ages of 7.2 ± 1.0 Ma and 6.7 ± 3.0 Ma and a long mean track length (>14.5 μm). Rapid Late Miocene cooling is attributed to denudation related to rifting. Despite the paucity of data, due to the absence of suitable lithologies in the area, our data confirm that the Central MER is younger than 8 Ma as recently proposed on the basis of field evidence and radiometric dating of volcanics. This implies that the Central MER formed after the Northern MER, indicating a diachronous development of this third arm of the Red Sea–Gulf of Aden–Ethiopian Rift system. Terra Nova, 00, 000–000, 2010     

New fission-track age determinations on impact glasses

Abstract— Four samples from Libyan Desert glass, one sample from Muong-Nong-type tektite, labelled Guang-Dong, and one sample from Czech Moldavite were analysed using the fission-track dating method. The Moldavite was unaffected by partial thermal track annealing, whereas the ages of Libyan Desert glass and Guang-Dong tektite appear to have been thermally lowered. Fission-track ages of the latter impact glasses were corrected using the plateau method. Apparent ages of Libyan Desert glass (between 26.0 ± 1.8 Ma and 29.0 ± 1.8 Ma) and Guang-Dong tektite (0.61 ± 0.05 Ma), as well as plateau ages (weighted mean: 28.5 ± 0.8 Ma for Libyan Desert glass and 0.77 ± 0.08 Ma for Guang-Dong) resulted in close agreement with previous determinations published in the late 1970s by Storzer and Wagner (1977). The age of the Moldavite (15.2 ± 0.08 Ma) also resulted in agreement with previous fission track and K-Ar determinations.     

A new late glacial to early Holocene palaeobotanical and archaeological record in the Eastern Pre‐Alps: the Palughetto basin (Cansiglio Plateau,Italy)

A late glacial to early Holocene lacustrine and peat succession, rich in conifer remains and including some palaeolithic flint artefacts, has been investigated in the Palughetto intermorainic basin (Venetian Pre‐Alps). The geomorphological and stratigraphical relationships, ¹⁴C dates and pollen analyses allow a reconstruction of the environmental history of the basin and provide significant insights into the reforestation and peopling of the Pre‐Alps. The onset of peat accumulation is dated to 14.4–14.1 kyr cal. BP, coinciding with reforestation at middle altitudes that immediately post‐dates the immigration of Larix decidua and Picea abies subsp. europaea. Plant macrofossils point to the expansion of spruce about 14.3 kyr cal. BP, so far one of the earliest directly dated in the late glacial period of southern Europe. The previous hypothesis of an early Holocene spruce immigration in the Southern Alps from Slovenia needs reconsideration. Organic sedimentation stopped at the end of the Younger Dryas and was followed by the evolution of hydromorphic soils containing lithic artefacts, anthropic structures and wood charcoal. The typological features of the flint implements refer human occupation of the site to the end of the recent Epigravettian. Charcoals yielded dates either consistent with, or younger than, the archaeological chronology, in the early and middle Holocene. Copyright © 2000 John Wiley & Sons, Ltd.     

Solubility and speciation of sulfur in silicate melts: The Conjugated Toop-Samis-Flood-Grjotheim (CTSFG) model

A Conjugated Toop-Samis-Flood-Grjotheim (CTSFG) model is developed by combining the framework of the Toop-Samis polymeric approach with the Flood-Grjotheim theoretical treatment of silicate melts and slags. Electrically equivalent ion fractions are computed over the appropriate matrixes (anionic and cationic) in a Temkin notation for fused salts, and are used to weigh the contribution of the various disproportionation reactions of type: