Sponge disease in the Adriatic Sea

A mass mortality episode involving three marine dyctioceratid sponges, Ircina variabilis, Sarcotragus spinosulus and Spongia officinalis, was observed on ‘Scoglio del Trave’ (Conero Promontory, North Adriatic Sea) in late summer 2009. In this area, calm sea and high temperatures throughout summer created unfavorable environmental conditions, leading to the outbreak of the disease. Affected specimens showed evident necrotic areas and portions with bare skeleton, and many specimens of S. spinosulus were covered with a white mat of cyanobacteria. In September 2009, about 22% of these demosponges suffered from this disease. The mortality event ceased when sea temperature dropped below 20 °C. Small specimens turned out to be more sensitive to the diseases, whereas the damaged tissues of large specimens were able to recover. In October, the damaged specimens were detached by the rough sea and more than 900 beached sponges were found along the 1‐km‐long beach, showing the seriousness of the phenomenon, which probably involved not only the area studied but also areas adjacent to it.     

The coral assemblages of an off‐shore deep Mediterranean rocky bank (NW Sicily,Italy)

In this study we characterized the deep assemblages dwelling at 200–250 m depth on a large shoal off Capo St. Vito Promontory (Northwestern coast of Sicily, South Tyrrhenian Sea) by means of ROV‐imaging. Two assemblages of suspension feeders, dominated by the gorgonian Callogorgia verticillata and by the black coral Leiopathes glaberrima, together with a tanatocoenosis of the colonial yellow scleractinian coral Dendrophyllia cornigera, were examined. The three main species were significatively distributed into two areas corresponding to different habitat preferences: a more elevated hardground hosting black corals and a gently sloping, silted rocky bottom hosting the other coral species. The study area is subjected to a heavy pressure from the professional fishery, resulting in the mechanical damage of numerous colonies, some of which are then overgrown by various epibionts including a parasitic bioluminescent zoanthid, new for the Mediterranean fauna, and tentatively identified as Isozoanthus primoidus. In the Mediterranean Sea, these deep off‐shore rocky banks are widely known among recreational and professional fishermen due to their rich fish fauna. However, there has been still little effort into quantifying and characterizing the extent of the impact and its consequences on the benthic communities, which may represent, as in this case, only a partial picture of their original structure and extent.     

The effect of Dauphiné twinning on plastic strain in quartz

We present an electron backscatter diffraction analysis of five quartz porphyroclasts in a greenschist facies (T = 300–400°C) granitoid protomylonite from the Arolla unit of the NW Alps. Mechanical Dauphiné twinning developed pervasively during the incipient stage of deformation within two porphyroclasts oriented with a negative rhomb plane {z} almost orthogonal to the compression direction (z-twin orientation). Twinning was driven by the anisotropy in the elastic compliance of quartz and resulted in the alignment of the poles of the planes of the more compliant positive rhomb {r} nearly parallel to the compression direction (r-twin orientation). In contrast, we report the lack of twinning in two porphyroclasts already oriented with one of the {r} planes orthogonal to the compression direction. One twinned porphyroclast has been investigated with more detail. It shows the localization of much of the plastic strain into discrete r-twins as a consequence of the higher amount of elastic strain energy stored by r-twins in comparison to z-twins. The presence of Dauphiné twins induced a switch in the dominant active slip systems during plastic deformation, from basal <a> (regions without twinning) to {π} and {π′} <a> (pervasively twinned regions). Dynamic recrystallization is localized along an r-twin and occurred dominantly by progressive subgrain rotation, with a local component of bulging recrystallization. Part of the recrystallized grains underwent rigid-body rotation, approximately about the bulk vorticity axis, which accounts for the development of large misorientation angles. The recrystallized grain size piezometer for quartz yields differential stress of 100 MPa. The comparison of this palaeostress estimate with literature data suggests that mechanical Dauphiné twinning could have a potential use as palaeopiezometer in quartz-bearing rocks.     

Distribution and population structure of deep‐dwelling red coral in the Northwest Mediterranean

Commercially harvested since ancient times, the highly valuable red coral Corallium rubrum (Linnaeus, 1758) is an octocoral endemic to the Mediterranean Sea and adjacent Eastern Atlantic Ocean, where it occurs on rocky bottoms over a wide bathymetric range. Current knowledge is restricted to its shallow populations (15–50 m depth), with comparably little attention given to the deeper populations (50–200 m) that are nowadays the main target of exploitation. In this study, red coral distribution and population structure were assessed in three historically exploited areas (Amalfi, Ischia Island and Elba Island) in the Tyrrhenian Sea (Western Mediterranean Sea) between 50 and 130 m depth by means of ROV during a cruise carried out in the summer of 2010. Red coral populations showed a maximum patch frequency of 0.20 ± 0.04 SD patches·m^?1 and a density ranging between 28 and 204 colonies·m^?2, with a fairly continuous bathymetric distribution. The highest red coral densities in the investigated areas were found on cliffs and boulders mainly exposed to the east, at the greatest depth, and characterized by medium percentage sediment cover. The study populations contained a high percentage (46% on average) of harvestable colonies (>7 mm basal diameter). Moreover, some colonies with fifth‐order branches were also observed, highlighting the probable older age of some components of these populations. The Ischia population showed the highest colony occupancy, density and size, suggesting a better conservation status than the populations at the other study locations. These results indicate that deep dwelling red coral populations in non‐stressed or less‐harvested areas may diverge from the inverse size‐density relationship previously observed in red coral populations with increasing depth.     

Energy partitioning during seismic slip in pseudotachylyte-bearing faults (Gole Larghe Fault, Adamello, Italy)

The determination of the earthquake energy budget remains a challenging issue for Earth scientists, as understanding the partitioning of energy is a key towards the understanding the physics of earthquakes. Here we estimate the partition of the mechanical work density into heat and surface energy (energy required to create new fracture surface) during seismic slip on a location along a fault. Earthquake energy partitioning is determined from field and microstructural analyses of a fault segment decorated by pseudotachylyte (solidified friction-induced melt produced during seismic slip) exhumed from a depth of ~ 10 km—typical for earthquake hypocenters in the continental crust. Frictional heat per unit fault area estimated from the thickness of pseudotachylytes is ~ 27 MJ m^− 2. Surface energy, estimated from microcrack density inside clast (i.e., cracked grains) entrapped in the pseudotachylyte and in the fault wall rock, ranges between 0.10 and 0.85 MJ m^− 2. Our estimates for the studied fault segment suggest that ~ 97–99% of the energy was dissipated as heat during seismic slip. We conclude that at 10 km depth, less than 3% of the total mechanical work density is adsorbed as surface energy on the fault plane during earthquake rupture.     

UNESCO World Heritage sites in Italy affected by geological problems, specifically landslide and flood hazard

A National Research Council, Research Institute for Hydrogeological Protection (IRPI) study on Italian monuments included in the UNESCO World Heritage List has revealed that many are affected by geological, geomorphological, and engineering geological problems. These monuments are static entities set in an environment that often manifests highly dynamic processes. As part of the efforts to protect sites of cultural and natural heritage, this study has applied a preliminary and empirical Geographical Information System-based method developed to characterize the environmental hazards at the sites where the monuments are located. Because the study of hydrogeological degradation falls within the province of IRPI, this hazard zoning focuses on river and mountain slope dynamics specifically concerning landslides and floods.     

The DEM or Mt. Etna: geomorphological and structural implications

Abstract

A Digital Elevation Model (DEM) of Mt. Etna is presented; it has altimetric and planimetric resolution of 1 m and 5 m, respectively, and covers an area of about 120 km . This 3-D view of Mt. Etna allowed both recognition and location of the main morphostructural and volcano-tectonic features of the volcano. A slope map has been generated from the DEM; on the basis of slope distributions and surface textures, five acclivity domains have been recognized. The largest domain, south of the summit craters, reflects the occurrence of old plateau lavas, distinct from central volcanoes which built the present Etnean volcanic system. Interaction between the central volcanoes, with their summit calderas and failed slopes, produced the other recognised domains. Furthermore, newly identified relevant morphostructural lines are discussed. © Elsevier, Paris     

Petrogenesis of the Paleoproterozoic basalt–andesite–rhyolite dyke association in the Carajás region, Amazonian craton

Paleoproterozoic basaltic, andesitic and rhyolitic dykes crosscut the Archaean Carajás basement. Basalts are distinguished into a high and a low TiO₂ group (HTi and LTi), each group consisting of geochemically distinct NE- and NW-trending swarms. The HTi dykes are evolved transitional basalts having essentially EMORB-type geochemistry. The LTi basalts are tholeiites (NE-trending swarm) and high-Al basalts (NW-trending swarm) displaying incompatible trace elements patterns with variably negative Nb anomaly, enrichment in Rb, Ba, K (LILE) and La, Ce and Nd (LREE) and positive Sr anomaly. With respect to orogenic analogues, andesites have lower Al₂O₃, CaO and Ni, higher FeO, LILE, LREE, Nb, Zr and Ti and negative Sr anomaly. Rhyolites have geochemical characteristics comparable with those of A-type granites. At 1.8 Ga, ranges from 0.700 to 0.705 in the HTi basalts and from 0.700 to 0.704 in the LTi group. Andesites define an isochron of 1874±110 Ma (Sr_o=0.7038±0.0010). Rhyolites from Southern and Northern Carajás define two isochrons of 1802±130 Ma (Sr_o=0.7062±0.0046) and 1535±82 Ga (Sr_o=0.7625) respectively, the younger date being interpreted as resetting of the Rb–Sr isotopic system. We propose a petrogenetic model relating LTi basalts with melting of lithospheric mantle metasomatized by acid melts derived from incipient melting of eclogites, representing in turn the subsolidus product of basaltic batches trapped in the mantle. The HTi basalts are explained by melting of the lithospheric mantle containing the complementary residual eclogite. Andesite petrogenesis is consistent with crystal fractionation from a high-Mg andesite parent derived from a mantle source more extensively metasomatized by eclogite-derived melts. Rhyolite composition is consistent with low melting degree of the basement rocks. The basalt–andesite–rhyolite dykes may represent the effects of crustal extension and arching in Carajás, which produced the anorogenic acid to intermediate magmatism (Uatumã group) and affecting a large part of the Amazon craton between 1.85 and 1.7 Ga.     

A combined methodology for estimating the potential natural aquifer recharge in an arid environment

ABSTRACT

An innovative methodology that combines an indirect physiography-based method for determining the runoff coefficient at a sub-basin scale and a water balance model applied on a daily time scale was developed to calculate the natural groundwater recharge in three watersheds within the Oum Zessar arid area, Tunisia. The effective infiltration was calculated as part of the water surplus by considering the average available water content (AWC) of soil and an average runoff coefficient for each sub-basin. The model indicates that the sub-basins covered mainly by the “artificial” soils of tabias and jessour, characterized by average AWC values greater than 150 mm, did not contribute to natural groundwater recharge over the 10-year period (2003–2012) considered. The estimated volume for the Triassic aquifer amounted to about 4.5 hm³ year^?1, which is consistent with previous studies. For the Jurassic and Cretaceous aquifers, the estimated volumes amounted to about 200 dm³ year^?1.