航向测量仪在车载三维信息采集系统中的应用

航向测量仪(Vector Sensor)的作用就是为车载惯导系统初始化提供所必须的航向角;根据不同的应用环境和特性,用航向测量仪获取在各种条件下的航向角数据,通过对这些数据在精度、稳定性以及解算时间等性能上的对比分析,得到该仪器的最佳工作状态,进而获取该状态下的航向数据;通过实际的实验测试,此状态下的数据在精度和稳定性方面都能满足惯导系统的需求。     

3S技术在堰塞湖应急治理中的应用研究

以四川堰塞湖为例,首先阐述了3S技术的特点、项目实施基本指标和项目作业技术系统;其次重点叙述了3S技术在项目实施中的技术流程,包括资料收集、地形图矢量化、矢量数据空间分析、TM遥感影像处理、野外调查建立解译标志、遥感解译、土壤侵蚀强度计算、解译成果野外校核、数据库集成等步骤.最后列举了如何利用3S技术解决危情作出的贡献.     

Geochemical evidence of an extraterrestrial component in impact melt breccia from the Paleoproterozoic Dhala impact structure,India

The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the ¹⁸⁷Os/¹⁸⁸Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.     

折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外     

基于组合统计降尺度的华西南部地区冬季气温预测技术研究

利用1982—2017年华西南部地区冬季气温和NCEP再分析资料以及CFS模式实时预测资料,通过SVD诊断分析,选取影响华西南部地区冬季气温的同期关键区大气环流和前期海温及OLR因子场,建立预测与观测场相结合的组合统计降尺度预测模型。该统计降尺度预测模型对1982—2017年的回报结果显示：与观测场的空间相关系数较CFS模式原始预测结果有显著提高,多年均值从-0.06提升到0.38,最高可达0.85。同时,此降尺度预测模型可较好地回报出华西南区冬季气温的空间分布型。     

锦州湾表层海水微塑料分布特征

海洋微塑料是全球关注的新兴环境问题,海湾由于特殊的地理环境特征,成为微塑料分布研究的热点区域.本研究以锦州湾为研究海域,于2017年10月布设了11个点位开展表层海水微塑料样品采集,在实验室采用湿式氧化法开展样品前处理,应用傅立叶变换显微红外光谱仪分析鉴定微塑料成分.研究结果表明,锦州湾表层水体微塑料平均丰度为(0.9...     

Constitutive approach for rate‐sensitive anisotropic structured clays

This paper describes a constitutive approach to model the behavior of rate‐dependent anisotropic structured clay. Rate‐sensitivity is modeled using overstress viscoplasticity. Clay structure is treated as a viscous phenomenon whereby the viscosity of the undisturbed structured clay is initially very high and the viscosity degrades or decreases with plastic straining until the intrinsic or residual viscosity is reached. A microstructure tensor approach is used to make the structured viscosity anisotropic; whereas, the intrinsic viscosity is assumed to be isotropic. The behavior of the constitutive model is compared with the measured response of two clays (Gloucester and St. Vallier clay) from Eastern Canada during triaxial compression tests on specimens trimmed at different orientations to the vertical. The comparisons show that the constitutive framework is able to describe the anisotropic and rate‐sensitive response of both clays. The response of the model is also examined for the more general case of anisotropic consolidated triaxial compression and extension. Copyright © 2010 John Wiley & Sons, Ltd.     

大连新港的红粘土及其工程特性的形成

在大连新港油罐区的建设中,发现了一种具有高孔隙性、高含水量、高塑性、中低压缩性的特殊土。作者对这种土及其母岩的矿物学、岩石学、地球化学、物理化学和工程特性进行了系统研究,揭示了该区红粘土及其工程特性的形成机理,该区红粘土乃是蒙脱石化的粗玄岩,在中温带气候区红土花作用的产物。     

The Zoulang Nanshan Caledonian Subduct ion Complex in the Northern Qilian Mountains and Its Dynamics

The front of the Zoulang Nanshan Caledonian volcanic island arc zone in the northern Qilian Mountains is a forearc accretionary terrane, composed of multiple accretionary volcanic island arcs, flysch accretionary wedges,high-pressure metamorphosed detachment zones and remnants of ophiolites. It resulted from the northeastward subduction of the Early Palaeozoic Qilan oceanic crust beneath the Alxa block. High-pressure metamorphism, which occurred during the subduction, progressed through three stages: the initial stage of medium T-high P,the main stage of temperature decrease and pressure increase, and the lag stage of pressure decrease and temperature increase. Finally the paper presents a retrotrench subduction dynamic model indicative of northward subduction of the central Qilian block and southward accretion of the Alxa block during the period of 450-500 Ma.