Influence of Geo-environmental and Chemical Factors on Thermotolerant Coliforms and <Emphasis Type="Italic">E.coli</Emphasis> in the Groundwater of Central Kerala

Geo-environmental studies in parts of Ernakulam district (Kerala, India) were carried out. The study area comprises of sedimentary (Limestone, sandstone, Clay and Lignite) and crystalline (Charnockite and gneisses) rocks. The sedimentary terrain is characterized by confined and unconfined aquifers. In hard crystalline formations groundwater occurs under phreatic conditions in the shallow weathered portions and under semi confined to confined conditions in the deep-seated fractures. The study area is demarcated into five areas based on soil types. Climate is hot humid to hot summer with heavily raining monsoon. Two major rivers Periyar and Muvattupuzha drain through the area. Agricultural and industrial activities are prevalent in Ernakulam district. The major cause of pollution in the study area is due to the presence of coliforms. Detailed investigations carried out to identify the coliforms indicated spatial and seasonal changes in the distribution pattern. Monsoon and post monsoon showed significantly high total coliforms compared to pre-monsoon. Thermo-tolerant coliforms is high during monsoon season. This seasonal change could be due to the effect of rainfall, overland flow, nutrient load and temperature change. Wide variations in the coliform counts are observed in wells situated near rivers, canals, paddy fields and in water bodies lying close to pilgrimage center, fertilizer industry, and public places. It is noticed that the chemical characteristics of the groundwater influence the coliform survival. pH, nitrite, bicarbonate, hardness, and alkalinity play a significant role in controlling coliform count. At the outset, the study highlighted the impact of anthropogenic activities on ground water in a coastal district of Kerala state.     

Development of Earthquake Event Detection Technique Based on STA/LTA Algorithm for Seismic Alert System

The drainage basin of the Kalyani river, a tributary of Gomati river has been mapped and delineated using Survey of India toposheets (1:50,000 scale) and remote sensing satellite data. The digitization, slope map preparation and statistical calculations have been carried out with the help of geographical information system (Arc GIS 10). Kalyani a fifth order river exhibits meandering behavior having 2.45 sinuosity index (SI). The Kalyani river basin has about 1235 km²area with NW-SE sloping trend. The total number of first, second, third, and fourth order streams are 373, 71, 12 and 2 respectively, showing dominance of first order streams in the basin. The mean bifurcation ratio (Rb) of the entire basin is 4.8, which indicates that the drainage is not much influenced by geological structures and exhibits dendritic drainage pattern. Relief ratio (Rr) indicates low to medium surface run-off, and low stream power for erosion. The analysis of river bank height ‘r’ (escarpment) and longitudinal profile of the river closely reveals neotectonic activity at some locations in the basin. To prepare a comprehensive watershed development and management plan, it is important to understand the topography and drainage characteristics of the region.     

Geochemical Characterization and Controlling Factors of Chemical Composition of Spring Water in a Part of Eastern Himalaya

This paper focuses on the suitability of spring water for drinking and irrigation purposes in a part of eastern Himalaya, south Sikkim. There are many anthropogenic and geogenic factors contributing as a source of major cations and anions in the spring water. The spring water chemistry show a variation in EC, pH, TDS, Temperature, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe²⁺, Pb, Mn, Cu, HCO₃^-, Cl^-, PO₄^3-, NO₃^-, F^- and SO₄^2-. Mainly two types of water quality indexing has been used, one for suitability of spring water for drinking purposes and the other for irrigation purposes. For drinking purposes, Piper diagram used for determination of water type, water quality index (WQI) for quality monitoring and saturation index for mineral dissolution in water. % Na, RSC (Residual Sodium Carbon) and SAR (sodium absorption ratio) have been used for irrigation suitability. Piper diagram shows that CaHCO₃ type of water was dominant in the study area. The WQI depicted excellent category and SAR, percent sodium and RSC (Residual Sodium Carbon) depict excellent, good and permissible category for irrigation purposes. Principle component analysis (PCA) was used to determine the major influencing factor responsible for the variability in the parameters analysed of spring water.     

Transport behavior of nZnO in geosynthetic clay liner used in municipal solid waste landfills under temperature effect

The transport process of nZnO in geosynthetic clay liner (GCL), an anti-seepage material used in municipal solid waste (MSW) landfills, under different seepage temperature conditions was conducted. The transport behavior of nZnO in GCL was analyzed. Results showed that the retardation performance of current GCL used in MSW landfills anti-seepage system against nZnO pollutants was poor. nZnO successfully permeated the GCL and entered external soil–groundwater environment, posing health threats to the life of organisms. Although seepage temperature exerted a small effect on nZnO suspension leakage volume, change in seepage temperature affects the mass of transported nZnO in GCL by redispersion of nZnO in suspension. As the seepage temperature increases, the mass of nZnO that permeated the GCL increases, reaching a maximum at 50 °C, and then decreases.     

A study of the factors influencing the occurrence of landslides in the Wushan area

Due to the complex natural geological conditions, many slope-related geological hazards occur in the Three Gorges Reservoir area in China. This study focuses on the characteristics of landslide development and their underlying mechanisms in this area. A statistical analysis is conducted to determine the characteristics of landslide development in the Wushan area, including the landslide distribution as a function of the elevation, slope, landslide material composition, scale, lithology, boundary conditions, instability mechanism, stratigraphic age, attitude, and sliding direction. The mechanisms of slope instability and the effect on the occurrence of landslides are analyzed. This study provides important reference material for landslide research in the Three Gorges Reservoir area and similar stratigraphic areas.     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.     

Characterization,modeling, and remediation of karst in a changing environment

This introductory editorial paper provides a review and prospective outlook of the achievements and challenges in karst research under a changing environment. A brief discussion of the past and future karst research has been focused on: (1) data and new technologies; (2) modeling of karst flow and reactive transport; (3) responses of karst hydrosystems to climate variability and changes across scales.     

Impact of drilling mud on chemistry and microbiology of an Upper Triassic groundwater after drilling and testing an exploration well for aquifer thermal energy storage in Berlin (Germany)

After completion of an exploration well, sandstones of the Exter Formation were hydraulically tested to determine the hydraulic properties and to evaluate chemical and microbial processes caused by drilling and water production. The aim was to determine the suitability of the formation as a reservoir for aquifer thermal energy storage. The tests revealed a hydraulic conductivity of 1–2 E-5 m/s of the reservoir, resulting in a productivity index of 0.6–1 m³/h/bar. A hydraulic connection of the Exter Formation to the overlaying, artesian “Rupelbasissand” cannot be excluded. Water samples were collected for chemical and microbiological analyses. The water was similarly composed as sea water with a maximum salinity of 24.9 g/L, dominated by NaCl (15.6 g/L Cl and 7.8 g/L Na). Until the end of the tests, the water was affected by drilling mud as indicated by the high pH (8.9) and high bicarbonate concentration (359 mg/L) that both resulted from the impact of sodium carbonate (Na₂CO₃) additives. The high amount of dissolved organic matter (>?58 mg/L) and its molecular-weight distribution pattern indicated that residues of cellulose, an ingredient of the drilling mud, were still present at the end of the tests. Clear evidence of this contamination gave the measured uranine that was added as a tracer into the drilling mud. During fluid production, the microbial community structure and abundance changed and correlated with the content of drilling mud. Eight taxa of sulfate-reducing bacteria, key organisms in processes like bio-corrosion and bio-clogging, were identified. It can be assumed that their activity will be affected during usage of the reservoir.     

Spatial and temporal analyses of air pollutants and meteorological driving forces in Beijing–Tianjin–Hebei region,China

Due to its negative impact on the living environment of human beings, ambient air pollution has become a global challenge to human health. In this study, surface observations of six criteria air pollutants, including PM_2.5, PM₁₀, SO₂, NO₂, CO and O₃, were collected to investigate the spatial and temporal variation in the Beijing–Tianjin–Hebei (BTH) region during 2013–2016 and to explore the relationships between atmospheric pollutants and meteorological variables using quantile regression model (QRM) and multiple linear regression model (MLRM). The results show that BTH region has experienced significant air pollution, and the southern part generally has more severe conditions. The annual average indicates clear decreasing trends of the particulate matters, SO₂ and CO concentrations over the last 4 years and slight increasing trends of NO₂ and O₃ in several cities. The seasonal and monthly characteristics indicate that the concentrations of five species reach their maxima in the winter and their minima in the summer, whereas O₃ has the opposite behaviour. Finally, the pseudo R² values show that the QRMs have the best performance in the winter, followed by spring, fall, and summer. Specifically, all the meteorological factors have significant impacts on air pollution but change with pollutants and seasons. The MLRM results are generally consistent with the QRM results in all seasons, and the inconsistencies are more common in the fall and winter. The results of this research provide foundational knowledge for predicting the response of air quality to climate change in the BTH region.