Simulation of marine boundary layer characteristics using a 1-D PBL model over the Bay of Bengal during BOBMEX-99

The characteristic features of the marine boundary layer (MBL) over the Bay of Bengal during the southwest monsoon and the factors influencing it are investigated. The Bay of Bengal and Monsoon Experiment (BOBMEX) carried out during July–August 1999 is the first observational experiment under the Indian Climate Research Programme (ICRP). A very high-resolution data in the vertical was obtained during this experiment, which was used to study the MBL characteristics off the east coast of India in the north and south Bay of Bengal. Spells of active and suppressed convection over the Bay were observed, of which, three representative convective episodes were considered for the study. For this purpose a one-dimensional multi-level PBL model with a TKE-ε closure scheme was used. The soundings, viz., the vertical profiles of temperature, humidity, zonal and meridional component of wind, obtained onboard ORV Sagar Kanya and from coastal stations along the east coast are used for the study. The temporal evolution of turbulent kinetic energy, marine boundary layer height (MBLH), sensible and latent heat fluxes and drag coefficient of momentum are simulated for different epochs of monsoon and monsoon depressions during BOBMEX-99.The model also generates the vertical profiles of potential temperature, specific humidity, zonal and meridional wind. These simulated values compared reasonably well with the observations available from BOBMEX.     

The Traigh Bhan na Sgurra Sill, Isle of Mull: Flow Localization in a Major Magma Conduit

Field evidence points to localization of magma flowing in aTertiary doleritic sill on the Isle of Mull, Inner Hebrides,Scotland. Regions of the sill in which flow was short-livedhave chilled margins, a narrow or absent metamorphic aureole,and alignment of plagioclase crystals resulting in pronounced,flow-parallel, lineations on fracture surfaces (Type I regions).Prolonged flow resulted in blocky, coarse-grained dolerite withno chilled margins, and an extensive metamorphic aureole (TypeII regions). The distribution of Type I and Type II regionsshows no spatial pattern, with stagnant solidifying sectionsimmediately adjacent to sections with contemporaneous activeand sustained flow. The transition between Type I and Type IIregions occurs as the sill thickness exceeds 3·5 m. Ourobservation that sustained flow was only possible in regionsof the sill thicker than 3.5 m is consistent with previouslypublished theoretical models which predict a critical sill thicknessin the range 2·2–5 m. Regions of the sill narrowerthan this experienced a single injection of magma. Simple modelsto determine flow duration from the width of the metamorphicaureole demonstrate that progressive focusing of flow into widerparts of the conduit created discrete channels active for upto 5 months. KEY WORDS: flow localization; magma; Mull; sill; Traigh Bhàn na Sgùrra     

Compression mechanisms of coesite

 The structure of coesite has been determined at ten pressures up to a maximum of 8.68 GPa by single-crystal X-ray diffraction. The dominant mechanism of compression is the reduction of four of the five independent Si–O–Si angles within the structure. There is no evidence of the fifth linkage, Si1–O1–Si1, deviating from 180°. Some Si–O bond distances also decrease by up to 1.6% over the pressure range studied. The pattern of Si–O–Si angle reduction amounts to a rotation of the Si2 tetrahedron around the [001] direction. This rotation induces significant internal deformation of the Si1 tetrahedron. Comparison of the experimental data with rigid-unit distance least-squares simulations of coesite suggests that this pattern of compression, the anomalous positive values of both s₂₃ and K′′ in the equation of state of coesite, its high elastic anisotropy and the unusual straight Si1–O1–Si1 linkage within the structure are all consequences of the connectivity of the tetrahedral framework. Received: 11 July 2002 / Accepted: 14 January 2003 Acknowledgements The help of Christian Baerlocher of ETH Zurich in providing both the DLS-76 software and advice in its use is gratefully acknowledged, as are discussions with Paul Ribbe of Virginia Tech and the comments of two anonymous reviewers. The data analysis was supported by the National Science Foundation under grant EAR-0105864 to N.L. Ross and R.J. Angel.     

Use of Geomorphological Information in Indirect Landslide Susceptibility Assessment

The objective of this paper is to evaluate the importance of geomorphological expert knowledge in the generation of landslide susceptibility maps, using GIS supported indirect bivariate statistical analysis. For a test area in the Alpago region in Italy a dataset was generated at scale 1:5,000. Detailed geomorphological maps were generated, with legends at different levels of complexity. Other factor maps, that were considered relevant for the assessment of landslide susceptibility, were also collected, such as lithology, structural geology, surficial materials, slope classes, land use, distance from streams, roads and houses. The weights of evidence method was used to generate statistically derived weights for all classes of the factor maps. On the basis of these weights, the most relevant maps were selected for the combination into landslide susceptibility maps. Six different combinations of factor maps were evaluated, with varying geomorphological input. Success rates were used to classify the weight maps into three qualitative landslide susceptibility classes. The resulting six maps were compared with a direct susceptibility map, which was made by direct assignment of susceptibility classes in the field. The analysis indicated that the use of detailed geomorphological information in the bivariate statistical analysis raised the overall accuracy of the final susceptibility map considerably. However, even with the use of a detailed geomorphological factor map, the difference with the separately prepared direct susceptibility map is still significant, due to the generalisations that are inherent to the bivariate statistical analysis technique.     

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).     

Lithofacies succession of maar crater deposits in the Eifel area (Germany)

ABSTRACT Maar craters often contain exceptionally preserved fossils and maar sediments may reflect detailed environmental changes. Volcanosedimentary processes in a Middle Eocene maar crater lake are illustrated by the deposits of Eckfeld Maar in the Tertiary Hocheifel Volcanic Field (Rhenish Massif, Germany). The maar origin of the basin is evident from a circular negative gravity anomaly which indicates a low-density funnel-shaped basin filling. From the facies analysis of an Eocene (Eckfeld) and a Pleistocene (Döttingen) maar we develop a lithozone classification for the interpretation of maar sediments: syn-/post-eruptive breccias are followed by a fining-upwards sequence of lacustrine mud with coarse layers and final swamp deposits. From the facies analysis and regional geological data we reconstruct the pre- to post-eruptive history of a maar crater prior to post-Eocene uplift. These observations can be used for the interpretation of Tertiary and Quaternary maar craters that are ideal fossil and sediment traps.     

Deformation at Stromboli volcano (Italy) revealed by rock mechanics and structural geology

We approach the reconstruction of the recent structural evolution of Stromboli volcano (Italy) and the analysis of the interplay between tectonics, gravity and volcanic deformation. By tying together structural, lithostratigraphic and rock mechanics data, we establish that since 100 ka BP, the edifice has faulted and jointed mainly along NE-striking planes. Faults mostly dip to the NW with normal displacement. Taking also into account the presence of a NW-trending regional least principal stress and of tectonic earthquake hypocenters inside the cone, we suggest that this fracturing can be related to the transmission of tectonic forces from the basement to the cone. Dyking concentrated along a main NE-trending weakness zone (NEZ) across the volcano summit, resembling a volcanic rift, whose geometry is governed by the tectonic field. In the past 13 ka, Stromboli experienced a reorganisation of the strain field, which was linked with the development of four sector collapses affecting the NW flank, alternating with growth phases. The tectonic strain field interplayed with dyking and fracturing related to unbuttressing along the collapse shoulders. We propose that tectonics control the geometry of dykes inside the cone and that these, in turn, contribute to destabilise the cone flanks.     

Evidence of long-lived I and Pu isotopes enrichment in vegetation samples around the Marcoule Nuclear Reprocessing Plant (France)

Iodine-129 and ²³⁸Pu, ²³⁹Pu and ²⁴⁰Pu are radionuclides posing a long-term safety concern due to their potential integration in bio and geo-chemical cycles and their significant half-lives. They are present throughout the environment at very low levels, and more particularly, nuclear fuel reprocessing plants (NRP) have been identified as local sources of these radionuclides. However, due to measurement difficulties, published data concerning their activity levels in terrestrial environments around NRP facilities remain scarce. The aim of the present paper is to communicate ¹²⁹I, ²³⁸Pu and ^239+240Pu measurements results from the area surrounding the Marcoule NRP, which is situated in SE France. Several vegetation samples were collected around the nuclear installation in 1999 and 2000, in order to examine the possible impacts of its atmospheric I and Pu discharges. Based on ²³⁸Pu/^239+240Pu activity ratios and ¹²⁹I/¹²⁷I isotopic ratios, local increases in Pu and ¹²⁹I were detected and related to industrial activity.     

Old inherited origin for the present near-bimodal topography of Africa

Africa’s landscape is dominated by a manifold of second-order epeirogenic structures superimposed on a first-order bimodal topography. Bivariate regression analysis of Africa’s surface topography shows that this is a complexly folded surface with regionally elevated areas in southern and eastern Africa, and a topographically low northern and western Africa. The apparent spatial relationships between these features are analysed using anomaly correlation between surface topography and free-air gravity anomalies. Occurrences of positively correlated features between gravity and topography in Africa are found to be limited to second-order epeirogenic features. Geophysical modelling and geologic evidence indicate that Africa’s bimodal topography is genetically distinct from these second-order features, and linked to sources as deep as the sublithospheric mantle. The age, measured and modelled elevation of the bimodal topography require that topographic uplift of south-central Africa be episodic. We infer from our findings together with relative sea-level changes, that the near-bimodality of Africa’s topography is an ancient feature inherited at least from upper Paleozoic times. Our reconstructed paleotopography suggests that Africa was largely a low-lying continent dominated by its cratons, and that basement distribution disregards the present-day uplift patterns of Africa.