Laboratory investigations of the role of biofilms on stream-bed surfaces in debris-flow runout

Debris-flow runout is a fascinating process to understand due to its implications for downstream alluvial fans. Based on the propagation-deposition behaviors of the Dongyuege (DYG) debris flow, in Yunnan, the effect of biofilms on channel surfaces on debris-flow runout is investigated in laboratory flumes with two different internal surfaces: surfaces are lined with granite slabs (Model I) and gravel (Model II), respectively. Our results show that biofilms can significantly reduce frictional resistance to flows. They increase flow velocities, slow down the deceleration of the snouts, prolong runout distances, and subsequently extend the areas covered with resulting deposits, thus greatly assisting the propagation of experimental debris flows. Slippery biofilms consisting mainly of diatoms and their extracellular mucus (ECM) reduce the contact friction between the flume-beds and the overlying fluids, and greatly promote the propagation of tested flows. Well-developed biofilms are found on the underwater channel surfaces of the DYG Creek. Acting as lubricating layers, they likely played a key role in the DYG debris-flow runout. Most of the debris transported during the DYG event was deposited on overbanks, and the sediment that caused the disaster was transported to the populated fan region through the stream-bed clad in the thick biofilms. Owing to their impacts on the development and width of the temporary debris dam breach, the stream-bed covered with biofilms became a direct contributor to the debris-flow hazard. Because of the ubiquitous presence of biofilms on mountain stream-bed surfaces, the development of perennial streamflows can be viewed as an indicator of gully susceptibility to debris flows threatening creek fans. The underwater areas of pre-event channel cross-sections should be regarded as slip or low-friction boundaries, and the parts above stream-levels can be viewed as no-slip boundaries. © 2019 John Wiley & Sons, Ltd.     

京西北地区地应变观测与小震震源机制解一致性研究

以京西北地区作为研究区域,采用应变参数方法解算定点地应变观测数据,将所得应变参数时间序列作为研究对象,利用该结果与研究区内同期小震震源机制解进行一致性分析,研究得出呈拉张性质的定点观测最大主应变方位与震源机制解最大拉张变形方向（T轴）水平投影具有良好的对应性,整体以NNW—NE向为主,且自西向东排布的测点最大主应变方位与震源机制解最大拉张变形方向均表现为逐渐东向偏移的趋势,与华北平原块体北部发生顺时针旋转活动的特征相吻合,结果进一步检验了地应变观测反映区域应变场信息的能力。     

The rotation of 53 Be stars

Through spectral observations we obtained the rotational velocity Vsini for 53 Be stars, and estimated the values of V and i on the basis of Hutching's method. We analysed the effect of rotation on the width of emission lines and used the emission peak separation to determine the relative size of the shell and the photosphere and the dilution factor. We discuss in depth fast rotating models where stellar winds are present and their relation to the Be phenomenon.     

Fatigue-Damage Evolution Characteristics of Interbeded Marble Subjected to Dynamic Uniaxial Cyclic Loads

In this work, uniaxial fatigue tests combined with post-test X-ray computed tomography (CT) scanning were conducted on marble samples with different interbed orientations, in order to reveal the anisotropic damage evolution characteristics during rock failure. The dynamic elastic modulus, damping ratio, fatigue deformation, damage evolution, accumulative damage modeling and crack pattern were systematically analyzed. The testing results indicate that the interbed structure in marble affects the damage evolution and the associated dynamic mechanical behaviors. The damage curve in “S” style indicates three-stage trend, namely, initial damage stage, steady damage stage and the accelerated damage stage. The damage index during cyclic deformation for marble presents obvious discrepancy. In addition, a fatigue damage prediction models was employed numerically as double-term power equations based on the experimental data. It is found that the selected damage model is suitable in modeling the rapid damage growth in the early and final stage of rock fatigue lifetime. Moreover, post-test CT scanning further reveals the anisotropic damage characteristics of marble, the crack pattern in the fractured sample is controlled by the interbed structure. What is more, the most striking founding is that the fracture degree is in consistent with the damage accumulation within the steady damage stage. Through a series of damage mechanical behavior analysis, the internal mechanism of the effect of interbed orientation on damage evolution of marble is firstly documented.

     

树根桩在厂房扩建工程地基处理中的应用

在苏南某工业厂房扩建工程中,为了妥善解决新旧熔炉区的不均匀沉降,通过多方案的比选,最终采用树根桩托换技术进行地基加固。并且对新旧熔炉区的基础进行了化学植筋连接和防渗漏处理。     

位场小波变换研究进展

小波变换的具有多尺度分析的特点,在位场资料分析中得到了广泛应用.本文总结了位场小波变换的理论基础及应用现状,介绍了位场小波基函数的概念.小波分析可以应用于位场分离、去噪、反演及综合地质解释等分析.文中从小波的数学性质和物理意义等角度讨论了位场资料处理中小波基函数的选取问题.     

Cracking mechanisms during galena mineralization in a sandstone-hosted lead–zinc ore deposit: case study of the Jinding giant sulfide deposit, Yunnan, SW China

There are two types of lead–zinc ore bodies, i.e., sandstone-hosted ores (SHO) and limestone-hosted ores (LHO), in the Jinding giant sulfide deposit, Yunnan, SW China. Structural analysis suggests that thrust faults and dome structures are the major structural elements controlling lead–zinc mineralization. The two types of ore bodies are preserved in two thrust sheets in a three-layered structural profile in the framework of the Jinding dome structure. The SHO forms the cap of the dome and LHO bodies are concentrated beneath the SHO cap in the central part of the dome. Quartz, feldspar and calcite, and sphalerite, pyrite, and galena are the dominant mineral components in the sandstone-hosted lead–zinc ores. Quartz and feldspar occur as detrital clasts and are cemented by diagenetic calcite and epigenetic sulfides. The sulfide paragenetic sequence during SHO mineralization is from early pyrite to galena and late sphalerite. Galena occurs mostly in two types of cracks, i.e., crescent-style grain boundary cracks along quartz–pyrite, or rarely along pyrite–pyrite boundaries, and intragranular radial cracks in early pyrite grains surrounding quartz clasts. The radial cracks are more or less perpendicular to the quartz–pyrite grain boundaries and do not show any overall (whole rock) orientation pattern. Their distribution, morphological characteristics, and geometrical relationships with quartz and pyrite grains suggest the predominant role of grain-scale cracking. Thermal expansion cracking is one of the most important mechanisms for the generation of open spaces during galena mineralization. Cracking due to heating or cooling by infiltrating fluids resulted from upwelling fluid phases through fluid passes connecting the SHO and LHO bodies, provided significant spaces for crystallization of galena. The differences in coefficients of thermal expansion between pyrite and quartz led to a difference in volume changes between quartz grains and pyrite grains surrounding them and contributed to cracking of the pyrite grains when temperature changed. Combined thermal expansion and elastic mismatch due to heating and subsequent cooling resulted in the radial and crescent cracking in the pyrite grains and along the quartz–pyrite grain boundaries.     

Hydraulic redistribution in the Inner Mongolia Huangfuchuan basins under different climate scenarios

This paper describes the scaling up to a day scale of the Ryel hour scale model incorporating the process of hydraulic redistribution (HR). The Ryel model was applied to the Inner Mongolia Huangfuchuan basins to analyze transpiration, evaporation and stomatal conductance of Artemisia tridentate, and to indicate the added value of the feedback by comparing simulations with and without incorporating HR. Five climate scenarios were designed based on 40-y continuous climate data from the study area and the response of HR to the different climate scenarios was modeled. Under 1991 climate conditions, cumulative transpiration and evaporation with HR during the growing season were 161.7 mm and 206.14 mm, respectively, compared with transpiration of 140.7 mm and evaporation of 174.2 mm without HR. Under the five different climate change scenarios, HR influenced evaporation more than transpiration. The effect of HR on transpiration, evaporation and stomatal conductance was very different among the scenarios. Inclusion of HR gave rise to the largest increase in transpiration and evaporation under the T2P0 scenario and the smallest under the T2P2 scenario, but transpiration and evaporation decreased under the T0P-2 scenario. Stomatal conductance significantly increased with the inclusion of HR. The model used in this study has potential benefits for incorporating HR into soil processes, such as water movement and mass transfer.     

Sustainability evaluation of different systems for sea cucumber (Apostichopus japonicus) farming based on emergy theory

Emergy analysis is effective for analyzing ecological economic systems. However, the accuracy of the approach is af-fected by the diversity of economic level, meteorological and hydrological parameters...     

Long-term monitoring of the individual self-feeding behavior of rainbow trout Oncorhynchus mykiss

Self-feeding device is extensively used in aquaculture farms, but for salmonids the individual feeding behavior has seldom been continuously observed. In this article, the individual self-feeding behavior of 10 rainbow trout was continuously monitored with a PIT tag record for 50 days with three replicates. The fish fell into three categories according to their feeding behavior, i.e. high triggering fish (trigger behavior more than 25% of the group, HT), low triggering fish (1%–25%, LT) and zero triggering fish (less than 1%). The results showed that in a group of 10 individual 1–2 HT fish accounted for most of the self-feeding behavior (78.19%–89.14%), which was far more than they could consume. The trigger frequency of the fish was significantly correlated with the initial body weight (P <0.01), however, no significant difference in growth rate among the HT, LT, and ZT fish was observed (P >0.05). Cosinor analysis showed that the two HT fish in the same group had similar acrophase. Though some of the HT fish could be active for 50 d, there were also HT fish decreased triggering behavior around 40 d and the high trigger status was then replaced by other fish, which was first discovered in salimonds. Interestingly, the growth of the group was not affected by the alternation triggering fish. These results provide evidence that in the self-feeding system the HT fish didn’t gain much advantage by their frequent self-feeding behavior, and high trigger status of the HT fish is not only an individual character but also driven by the demand of the group. In the self-feeding system, the critical individual should be closely monitored.