基于本体的地理空间信息集成框架与实现

论述了地理本体的基本概念、结构,介绍了地理本体的建模方法,提出了基于地理本体的空间数据集成框架,包括构建地理本体、数据预处理、概念映射、数据映射和数据抽取与转换5个步骤;设计了基于本体的空间数据集成方案,以数字地形图数据、海图数据向标准本体的集成为例对方案进行验证试验,并取得了初步成果。     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

扬州市6－7月份天气预报服务业务化系统

从地（市）级气象台的业务工作出发,试图建立通过微机实现的对上接收信息、对外预报服务、对下预报指导的三位一体的天气预报服务业务化系统,以发挥地（市）级气象台在经济建设和防灾减灾中的作用,推动天气预报和服务的现代化建设,把基层气象工作推向一个新的台阶。     

矿产预测中成矿信息的提取和强化

成矿信息的提取是矿产预测的重要手段,其方法的有效性直接影响到预测成果的可靠性。在成矿规律研究的基础上,有意识地干预模型的构成,突出与成矿有关的信息;抑制某些成矿意义不明显和属干扰的信息,有目的地使模型向反映成矿信息的方向逼近,提高模型与矿床实际赋存地质环境的吻合程度,均是成矿信息提取和强化的内涵。本文从研究实践中总结了先验约束模型和非先验约束模型的强化方法,在新疆阿勒泰地区的地质－找矿工作中已取得     

新疆地震预报研究

新疆的地震预报是1970年开始的。二十多年来在“边观测、边研究、边预报”、“多路探索、多兵种联合作战”、“走综合预报之路”的方针指导下取得了长足的进展。建设了43个地震台站,投入189套仪器,建成了遍布全疆的地震无线通讯网,开展了历史地震调查和地震烈度区划工作,建立健全了地震会商预报制度,进行了多方面的地震预报研究。实际地震预报统计分析表明,扣除自然发震概率之后,趋势预报的成功率约0.3,短临预报的成功率约0.1。在前兆台网控制范围内取得了一些震例,说明地震确实是有前兆的,但又是非常复杂的。地震预报作为科学难题还有漫长的路要走。作者简要地讨论了地震观测的间接性和地震异常的离散性、难以区别的地震异常和地壳变动异常、建立在复杂现象基础上的地震前兆以及地震的混沌性对地震预报的影响等科学问题。     

地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。     

Characteristics of afferent activity of ampullary electroreceptors in catfish Parasilurus asotus

The spontaneous and evoked activity of electroreceptors were electrophysiologically studied. The results are:

Two-dimensional pH distributions and dynamics in bioturbated marine sediments

The seafloor is the site of intense biogeochemical and mineral dissolution-precipitation reactions which generate strong gradients in pH near the sediment-overlying water interface. These gradients are usually measured in one-dimension vertically with depth. Two-dimensional pH distributions in marine sediments were examined at high resolution (65 × 65 μm pixel) and analytical precision over areas of ∼150 to 225 cm² using a newly developed pH planar fluorosensor. Dramatic three-dimensional gradients, complex heterogeneity, and dynamic changes of pH occur in the surficial zone of deposits inhabited by macrofauna. pH can vary by ±2 units horizontally as well as vertically over millimeter scales. pH minima zones often form in association with redoxclines within a few millimeters of inner burrow walls, and become more pronounced with time if burrows remain stable and irrigated for extended periods. Microenvironmental pH minima also form locally around decaying biomass and relict burrow tracks, and dissipate with time (∼5 d). H⁺ concentrations and fluxes in sandy mud show complex acid-base reaction distributions with net H⁺ fluxes around burrows up to ∼12 nmol cm⁻² d⁻¹ and maximum net reaction rates varying between −90 (consumption) to 120 (production) μM d⁻¹ (∼90 nmol cm⁻¹ d⁻¹ burrow length). Acid producing zones that surround irrigated burrows are largely balanced by acid titration zones along inner burrow walls and outer radial boundaries. The geometry and scaling of pH microenvironments are functions of diagenetic reaction rates and three-dimensional transport patterns determined by sediment properties, such as diffusive tortuosity, and by benthic community characteristics such as the abundance, mobility, and size of infauna. Previously, undocumented biogeochemical phenomena such as low pH regions associated with in-filled relict biogenic structures and burrowing tracks are readily demonstrated by two-dimensional and time-dependent images of pH and sedimentary structure.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.