Sea-level, sediment supply and coastal changes: Examples from the coast of Ireland

Sediment supply and pre-existing shoreline morphology are crucial factors in controlling coastal changes due to sea-level rise. Using examples from both southeast and northeast Ireland, it can be shown that sea-level change may trigger a sequence of events which leads to both static and dynamic shoreline equilibrium. Cliff erosion and longshore sediment movement in east Co. Wexford has led to injection of sediment onto the shelf, and the growth, under both wave and tide regimes, of linear offshore shoals. These shoals now control the pattern of shoreline erosion and provide a template for possible stepwise evolution of the coast under any future sea-level rise. In contrast, the nearby coast of south Co. Wexford comprises a series of coarse clastic barriers moving monotonously onshore, via overwash processes. Here the behavior of the barrier is conditioned by the antecedent morphology of both the beach face and stream outlet bedforms. Finally, the rock platform coast of Co. Antrim presents a far more resistant shoreline to incident marine processes, yet even here there is strong evidence of present process control over so-called ‘raised’ platforms and embayments. It is concluded that coastal sediment supply and dynamics, together with coastal morphology and its interaction with waves, present a far more complex variety of sea-level indicators than is normally acknowledged.     

Seasonal Variation in the Biomass of Marine Macrophyta from Greek Coasts

Abstract. The marine plant communities of the littoral zone in different biotopes of the Greek coasts were investigated in 1980-81. Seasonal distribution and variation of marine plant biomass were assessed. The communities of Cystoseira crinita and C. compressa were outstanding with maximum biomass during the summer months. Corallina officinalis and Pterocladia capillacea + Viva rigida communities predominated with maximum biomass in autumn and exhibited a decrease in winter, except in stressed biotopes. The species diversity and productivity of seaweeds along the Greek coasts are interpreted in relation to a number of environmental parameters.     

Simulation of additive transport from the land surface on the basis of experimental data on heat transfer in the atmospheric surface layer

A method is proposed to study the transport of a passive additive in the atmospheric surface layer with the use of the atmospheric transfer function. This method makes it possible to estimate the spatial distribution of the concentration of a passive additive in the atmospheric surface layer from the additive’s surface source without experimentally determining the vertical profile of the transport coefficient or without resorting to various hypotheses for the character of its behavior. The transfer function, which contains the information on the wind-field structure, can be obtained from simple one-point measurements of surface-and air-temperature fluctuations and from subsequent spectral processing of the data. The effects of the wind-velocity profile and turbulence on the spatial distribution of additive concentration are assessed. This method allows one to simplify experiments during development and verification of the models of atmospheric diffusion. This method may also be useful in emergency situations to predict the propagation of hazardous additives.     

Probing molecular-level transformations of dissolved organic matter: insights on photochemical degradation and protozoan modification of DOM from electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Molecular-level characterization of natural organic matter (NOM) has been elusive due to the inherent complexity of natural organic mixtures and to the fact that individual components are often polar and macromolecular. Electrospray ionization (ESI) is a “soft” ionization technique that ionizes polar compounds from aqueous solution prior to injection into a mass spectrometer. The highest resolution and mass accuracy of compounds within NOM have been achieved when ESI is combined with an ultrahigh-resolution mass spectrometer such as the Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS). With this technique, individual molecules within a variety of natural organic mixtures can be detected and their elemental composition can be determined. At low mass-to-charge (m/z) ratio, the resolution is high enough to assign exact molecular formulas allowing specific components of these mixtures to be identified. In addition to molecular identification, we can now use ESI FT-ICR MS to examine molecular-level changes in different organic mixtures as a function of relevant geo-processes, such as microbial alterations and photochemistry. Here we present the results from the application of ESI FT-ICR MS to two geochemical questions: (1) the effect of photoirradiation on the molecular composition of fulvic acids and (2) the role of protozoan grazers in the modification of DOM in aquatic systems.     

Temperature fluctuations in the atmospheric surface layer over the thermally inhomogeneous underlying surface

The influence of both spatial and temporal temperature inhomogeneities of the underlying surface on the temperature field in an unstably stratified atmospheric surface layer is considered. The methods of correlation and spectral analyses are proposed to estimate statistical characteristics of surface-air temperature fluctuations caused by both turbulent mixing and inhomogeneities in the temperature of the underlying surface. Analysis of experimental data obtained from measurements in the atmospheric surface layer yields estimates for the contribution made by the time-dependent thermal properties of the underlying surface to the total variance of air-temperature fluctuations. It is shown that the additional air-temperature fluctuations generated by surface-temperature inhomogeneities and unrelated to shear flow may reach 70% and 30% of the total variance of measured fluctuations under variable cloudiness and clear skies, respectively. For the height z = 2 m within the wave-number range 2 × 10^?3 rad m^?1 < k < 0.1 rad m^?1, the contribution made by a spatial surface-temperature inhomogeneity to the variance of air-temperature fluctuations does not exceed 10% of the total variance. Correlation and spectral analyses of experimental data make it possible to isolate the spectra of properly turbulent fluctuations from the measured fluctuations and thus to obtain more accurate values of the universal function of similarity theory for temperature in the range of small wave numbers beyond the inertial range.     

Assessment of cytochrome P450 1A in harbour seals (Phoca vitulina) using a minimally-invasive biopsy approach

Biomarkers of organochlorine exposure, such as the induction of cytochrome P450 1A (CYP1A), can be used to assess the impact of environmental contaminants on the health of free-ranging marine mammal populations. The objective of the present study was to measure CYP1A in skin and liver biopsies obtained from live harbour seals (Phoca vitulina). Twelve harbour seal pups, aged three to five weeks, were captured from the Fraser River estuary, British Columbia, Canada, and temporarily held in captivity. Skin ( approximately 60 mg) and liver ( approximately 40 mg) biopsies, obtained while seals were under general anaesthesia, yielded sufficient tissue for the measurement of CYP1A by immunoblot analysis and ethoxyresorufin O-deethylase activity. A short-term exposure experiment, in which harbour seals (n=3) were treated orally with beta-naphthoflavone (BNF), resulted in increased hepatic and cutaneous CYP1A protein levels, consistent with observations in other mammals. This study is the first to measure CYP1A in skin and liver biopsies from live harbour seals and to report in vivo BNF-associated CYP1A induction in a marine mammal. The results demonstrate that microsamples collected using minimally-invasive techniques can provide toxicologically-relevant information form marine mammals.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

计算域的选取对风暴潮数值模拟的影响

作者以 72 0 3号台风过程中引起的黄海沿岸水文测站的风暴潮过程为例 ,选取不同计算域 ,模拟计算的同一测站的风暴潮增水值有很大差异。只有选取整个黄渤海海域 ,才能得到较精确的风暴潮增水结果。从而揭示在封闭或半封闭海域中由风暴过程激发的区域自由振荡 ,是风暴潮增水中不容忽视的量。说明该海域中的风暴潮过程是海域整体效应的响应 ,因此认为数值模拟中计算域应选取整个封闭或半封闭海域