关于海域面积精确计算的若干问题探讨

海域面积精确计算是实现海洋功能区划的基础和关键之一。本文通过对江苏省海洋功能区划工作中误差的分析 ,并针对其产生原因 ,在地图投影的选择和坐标的变换、扫描精度的控制、配准精度的控制、图象的数字化和图形编辑等方面 ,提出了相应的优化处理方法 ,提高了海域面积计算的精度 ,将其中误差控制在估计值范围内 ,从而在实际工作中有一定的应用价值。     

Heave compensation and formation strength evaluation from downhole acceleration measurements while coring

In order to evaluate the efficiency of heave compensation in the Ocean Drilling Program, we developed a device measuring the acceleration of the core barrels. First results show that heave compensation limits bit motion to 10% of the surface heave. We also use the acceleration data to characterize the formation. On rotary corers, acceleration amplitudes decrease with increasing hardness of the formation. Comparison with geophysical logs shows that this relationship can resolve cm-scale features. On piston corers, the maximum acceleration is characteristic of the sediment shear strength. Easy and fast to deploy, this tool allows to characterize formations before any sample analysis.     

Tectonics at the intersection of the East Pacific Rise with Tamayo Transform fault

During the Fall of 1979, a manned submersible program, utilizing DSRV ALVIN, was carried out at the intersection of the East Pacific Rise (EPR) with the Tamayo Transform boundary. A total of seven dives were completed in the vicinity of the EPR/Tamayo intersection depression and documented the geologic relationships that characterize the juxtaposition of these types of plate boundaries. The young volcanic terrain of the EPR axis can be traced into and across the Tamayo Transform valley but becomes buried by sedimentary talus that is being shed from sediment scarps along the unstable sediment slope that defines the north side of the intersection depression. Within 4 km of the transform boundary, the dominant trend (000°) of the fissures and faults that disrupt the rise-generated volcanics is markedly oblique to the regional direction of sea floor spreading (120°). Since no evidence was found to suggest that these structures accommodate significant amounts of strike-slip displacement, they are taken to reflect a distortion of the EPR extensional tectonic regime by a transform generated shear couple. The floor of the Tamayo Transform valley in this area is inundated by mass-wasted sediment, and the principal transform displacement zone is characterized at the surface by a narrow (<1.5 km) interval of fault scarps in sediment that trends parallel with the transform valley. Extrapolated to the west, this zone links with zones of transform deformation investigated during earlier submersible studies (CYAMEX and Pastouret, 1981). Evidence of low-level hydrothermal discharge was seen at one locality on the EPR axis and at another 8 km west of the axis at the edge of the zone of transform deformation.     

渤海南部表层沉积的相特征

通过海上调查及实验室分析,查明渤海南部表层沉积物在结构类型、矿物组合、生物组分及沉积构造等相特征方面具有明显的分区性。渤海南部存在五种沉积相:黄河水下三角洲相、陆架盆地相、海湾相、潮流浅滩相及古滨岸相。黄河水下三角洲相从河口延至水深15—20米处,沉积速率很高,沉积物富含碎屑云母及CaCo_3。陆架盆地相的沉积为粉砂质粘土,具有生物扰动构造。     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

A hydrodynamic model of a submerged lenticular wave energy device

The wavemaking capability and energy absorbing characteristics of a single submerged body, constrained to move horizontally in a surge mode, are examined. The body possesses both a vertical axis of symmetry and a horizontal plane of symmetry and is ‘thin’ in the sense that the body draft is small compared to the length. The behaviour of a single body subject to a constraint being placed upon the amplitude of its displacement and the properties of an array of interacting identical devices are also discussed.     

红海湾水域溶解氧、pH值、盐度和营养盐分布特征及相互关系研究

通过１９９８年６月对广东省红海湾海水养殖水域环境因子的调查,阐述了海水中溶解氧、盐度、ｐＨ值和营养盐的分布特征及其变化规律,并讨论了它们之间的相互关系,结果表明,溶解氧及海水ｐＨ值随温度由北（除１５￣１７号站）向南（除６号站）增高而增高。同时证实了光合作用是导致溶解氧含量和ｐＨ值增高的主要原因。而营养盐与盐度呈密度的负相关,浮游植物总量随营养盐由北向南降低而明显增高。     

Benthic Metabolism and Standing Stock in the Central and Northern Deep Red Sea

Abstract. Benthic metabolism and standing stocks were investigated in the deep Red Sea between 21^o and 27^oN, Activity was assessed by the determination of respiration rates with a shipboard method and by calculating oxygen consumption from the activity in the electron transport system. We attempted to compare results from different latitudes within the warm Red Sea and with data from cold Atlantic environments. Our investigations were part of an environmental risk assessment to evaluate future mining of metalliferous sediments from the Atlantis II Deep.