Parsimonious wave‐equation travel‐time inversion for refraction waves

We present a parsimonious wave‐equation travel‐time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave‐equation travel‐time inversion. Numerical results show that the parsimonious wave‐equation travel‐time tomogram has about the same accuracy as the tomogram computed by standard wave‐equation travel‐time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.     

匹配滤波方法研究2016年意大利中部MW6.0地震的余震迁移

2016年8月24日意大利中部发生M_W6.0地震,2个月之后,震中附近相继发生M_W5.5、M_W5.9、M_W6.5地震。研究这几次较大地震间的相互触发作用及机制十分必要,然而在大地震之后传统地震目录通常缺失很多余震事件,缺失的余震事件包含着早期余震时空分布和迁移规律的信息,为完善余震目录本文利用匹配滤波方法对M_W6.0地震后80天内的连续数据进行余震检测,得到了数十倍于模板数量的新检测事件,检测事件与模板事件组成的新余震目录完备震级为1.0,提高了地震目录的完备性。依据新余震目录进行余震时空分布研究,结果显示M_W6.0、M_W5.9、M_W6.5地震的早期余震迁移规律不同。M_W6.0地震的早期余震沿着断裂走向同时朝两侧迁移;而M_W5.9、M_W6.5地震的早期余震向南、北迁移表示出不对称的特征。通过拟合余震迁移前端发现,M_W6.0、M_W5.5地震的早期余震朝着随后较大地震的方向迁移,且较符合lgt的特征,表明余震迁移可能与慢滑动有关。     

Three-dimensional analysis of ozone and PM<Subscript>2.5</Subscript> distributions obtained by observations of tethered balloon and unmanned aerial vehicle in Shanghai,China

A lightweight unmanned aerial vehicle (UAV) and a tethered balloon platform were jointly used to investigate three-dimensional distributions of ozone and PM_2.5 concentrations within the lower troposphere (1000 m) at a localized coastal area in Shanghai, China. Eight tethered balloon soundings and three UAV flights were conducted on May 25, 2016. Generalized additive models (GAMs) were used to quantitatively describe the relationships between air pollutants and other obtained parameters. Field observations showed that large variations were captured both in the vertical and horizontal distributions of ozone and PM_2.5 concentrations. Significant stratified layers of ozone and PM_2.5 concentrations as well as wind directions were observed throughout the day. Estimated bulk Richardson numbers indicate that the vertical mixing of air masses within the lower troposphere were heavily suppressed throughout the day, leading to much higher concentrations of ozone and PM_2.5 in the planetary boundary layer (PBL). The NO and NO₂ concentrations in the experimental field were much lower than that in the urban area of Shanghai and demonstrated totally different vertical distribution patterns from that of ozone and PM_2.5. This indicates that aged air masses of different sources were transported to the experimental field at different heights. Results derived from the GAMs showed that the aggregate impact of the selected variables for the vertical variations can explain 94.3% of the variance in ozone and 94.5% in PM_2.5. Air temperature, relative humidity and atmospheric pressure had the strongest effects on the variations of ozone and PM_2.5. As for the horizontal variations, the GAMs can explain 56.3% of the variance in ozone and 57.6% in PM_2.5. The strongest effect on ozone was related to air temperature, while PM_2.5 was related to relative humidity. The output of GAMs also implied that fine aerosol particles were in the stage of growth in the experimental field, which is different from ozone (aged air parcels of ozone). Geographical parameters influenced the horizontal variations of ozone and PM_2.5 concentrations by changing underlying surface types. The differences of thermodynamic properties between land and sea resulted in quick changes of PBL height, air temperature and dew point over the coastal area, which was linked to the extent of vertical mixing at different locations. The results of GAMs can be used to analyze the sources and formation mechanisms of ozone and PM_2.5 pollutions at a localized area.     

The relationship between significant wave height and Indian Ocean Dipole in the equatorial North Indian Ocean

Based on reanalysis data, we find that the Indian Ocean Dipole (IOD) plays an important role in the variability of wave climate in the equatorial Northern Indian Ocean (NIO). Significant wave height (SWH) in the equatorial NIO, especially over the waters southeast to Sri Lanka, exhibits strong interannual variations. SWH anomalies in the waters southeast to Sri Lanka correlate well with dipole mode index (DMI) during both summer and autumn. Negative SWH anomalies occur over the oceanic area southeast to Sri Lanka during positive IOD events and vary with different types of IOD. During positive prolonged (unseasonable) IOD, the SWH anomalies are the strongest in autumn (summer); while during positive normal IOD, the SWH anomalies are weak in both summer and autumn. Strong easterly wind anomalies over the southeast oceanic area of Sri Lanka during positive IOD events weaken the original equatorial westerly wind stress, which leads to the decrease in wind-sea waves. The longer wave period during positive IOD events further confirms less wind-sea waves. The SWH anomaly pattern during negative IOD events is nearly opposite to that during positive IOD events.     

Shear strength of frozen clay under freezing-thawing cycles using triaxial tests

Using a new low-temperature dynamic triaxial apparatus, the influence law of freezing-thawing cycles on clay shear strength is studied. In this research, the concept of correction coefficients of freezing-thawing cycles on clay static strength, cohesion and internal friction angles is proposed, and the change patterns, correction curves and regressive formulae of clay static strength, cohesion and internal friction angles under freezing-thawing cycles are given. The test results indicate that with increasing numbers of freezing-thawing cycles, the clay static strength and cohesion decrease exponentially but the internal friction angle increases exponentially. The performance of static strength, cohesion and internal friction angles are different with increasing numbers of freezing-thawing cycles, i.e., the static strength decreases constantly until about 30% of the initial static strength prior to the freezing-thawing cycling and then stays basically stable. After 5–7 freezing-thawing cycles, the cohesion decreases gradually to about 70% of the initial cohesion. The internal friction angle increases about 20% after the first freezing-thawing cycle, then increases gradually close to a stable value which is an increase of about 40% of the internal friction angle. The freezing-thawing process can increase the variation of the density of the soil samples; therefore, strict density discreteness standards of frozen soil sample preparation should be established to ensure the reliability of the test results.     

Human-induced changes in recent sedimentation rates in Bohai Bay,China: Implications for coastal development

In many countries, coastal planners strive to balance the demands between civil, commercial strategy and environmental conversation interests for future development, particularly given the sea level rise in the 21 st century. Achieving a sustainable balance is often a dilemma, especially in low-lying coastal areas where dams in inland river basin are trapping significant amounts of fluvial sediments. We recently investigated the shore of Bohai Bay in northern China where there has been a severe increase in sea level following a program of large-scale coastal reclamation and infrastructure development over the last five decades. To investigate this trend, we obtained sediment cores from near-shore in Bohai Bay, which were dated by ~(137)Cs and ~(210)Pb radionuclides to determine the sedimentation rates for the last 50 years. The average sedimentation rates of Bohai Bay exceeded 10 mm yr~(-1) before 1963, which was much higher than the rate of local sea-level rise. However, our results showed an overall decreasing sedimentation rate after 1963, which was not able to compensate for the increasing relative sea-level rise in that period. In addition, our results revealed that erosion occurred after the 1980 s in the shallow sea area of Bohai Bay. We suggest that this situation places the Bohai Bay coast at a greater risk of inundation and erosion within the next few decades than previously thought, especially in the large new reclamation area. This study may be a case study for many other shallow sea areas of the muddy coast if the sea level continues to rise rapidly and the sediment delivered by rivers continues to decrease.     

筋土界面特性宏细观分析试验仪器研制与应用

为了更全面地分析筋土界面相互作用特性,改制了一台可视加筋土界面特性宏细观分析的试验仪器,可开展不同土工合成材料与填料的直剪和拉拔试验;该仪器改进了试验箱的尺寸,可方便两种试验的对比分析,增加了图像摄录系统,可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验,试验结果表明:两种试验条件下,土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大;直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响,拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著,对似摩擦角的影响较小。随着宏观变量法向应力的增加,细观参数孔隙率减小,平均接触数增加,反映在宏观上的现象就是填料颗粒被压密,筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性,获得关键技术指标以用于加筋结构的设计。      

网络环境下城市公开版电子地图数据更新方法

针对目前数据更新的研究落后于数据生产的现状以及广大用户对城市公开版电子地图的现势性的迫切需要,在已有研究成果的基础上,提出了网络环境下城市公开版电子地图数据更新的方法,并分析了数据更新周期的决定因子及其方式和周期,最后用实例加以证明。     

一种新的BOC调制无模糊跟踪鉴别器设计

建立了导航接收机码跟踪延迟锁定环的数学模型,讨论了DP和EMLP鉴别器在不同信号、不同前端滤波器带宽的鉴别曲线特性,阐述了BOC调制模糊跟踪产生的原因。针对BOC调制信号的模糊跟踪问题,从BOC调制的机理出发,将BOC调制分成伪码和副栽波两部分分析,阐述了一种新的鉴别器设计。实验表明：新鉴别器设计,鉴别曲线线性跟踪区域斜率最高为9,可实现BOC调制的无模糊跟踪。     

High‐Precision,High‐Accuracy Oxygen Isotope Measurements of Zircon Reference Materials with the SHRIMP‐SI

Analytical protocols for SHRIMP‐SI oxygen isotope analysis (δ¹⁸O) of a suite of zircon reference materials (RMs) are presented. Data reduction involved a robust estimate of uncertainties associated with the individual spot as well as for groups where the spot data are combined. The repeatability of δ¹⁸O measurements is dependent on both the analytical conditions and the choice of the primary reference material. Under optimised conditions, repeatability was often better than 0.4‰ (2s) allowing sample uncertainties to be obtained to better than 0.2‰ (at 95% confidence limit). Single spot uncertainty combined the within‐spot precision with the scatter associated with repeated measurements of the primary zircon reference material during a measurement session. The uncertainty for individual spots measured under optimised conditions was between 0.3 and 0.4‰ (at 95% confidence). The analytical protocols described were used to assess a variety of zircon RMs that have been used for geochronology and for which laser fluorination oxygen isotope data are available (Temora 2, FC1, R33, QGNG and Ple?ovice), as well as zircons that have been used as RMs for trace element or other types of determination (Mud Tank, Monastery, 91500, AS57, AS3, KIM‐5, OG1, SL13, CZ3 and several other Sri Lankan zircons). Repeated analyses over nine sessions and seven different mounts show agreement within analytical uncertainty for Temora 2, FC1, R33, QGNG, Ple?ovice and 91500, when normalised to Mud Tank. For existing ion microprobe mounts with these materials, an appropriate δ¹⁸O can be determined. However, care should be taken when using zircons from the Duluth Complex (i.e., FC1, AS57 and AS3) as reference materials as our data indicated an excess scatter on δ¹⁸O values associated with low‐U zircon grains.