Site effects in the Aterno River Valley (L’Aquila,Italy): comparison between empirical and 2D numerical modelling starting from April 6th 2009 Mw 6.3 earthquake

In this paper, we focused our attention on a cross-section of the Aterno River Valley where a good quality geological and geophysical dataset allowed to reconstruct accurately the geometry and the Vs profiles along all the plane of the section. Its trace is deliberately aligned close to the strong motion stations that recorded the Mw 6.3 (April 6th 2009) L’Aquila earthquake. We analysed strong and weak motion data available at these latter stations as well as at one of the temporary stations installed during the Microzonation activities and located on outcropping bedrock, in proximity of the cross-section. We used the H/V technique to select a reliable reference site and once we found it, we applied the SSR technique to compute amplification functions in correspondence of two strong motion stations. In turn, for both sites we performed a site response numerical modelling with two different 2D codes and we compared simulated versus experimental transfer functions. We found that the cross-section is well constrained based on the very reasonable agreement between results of numerical modelling and earthquake data analysis. We pointed out also a strong amplification of the deposit at the centre of the valley due to the constructive interference of S and surface waves, not predictable by means of 1D numerical modelling. We also compared the H/V as well as the SSR obtained from strong motion data with the ones computed from weak motion finding evidences of non-linearity in soil behaviour.     

Simplified seismic soil classification: the Vfz matrix

Site effect assessment studies aim at predicting the effect of seismic shaking on structures by modeling the subsoil as an oscillator coupled to another oscillator representing the construction. The resulting amplification functions and response spectra depend on so many strong assumptions and parameters that, in the standard engineering practice, simplified seismic classifications appear preferable to complex modeling procedures which can only offer an illusory better accuracy. Since stratigraphic seismic amplification is not properly related to the absolute rigidity of subsoil but to impedance contrasts, the standard simplified approaches based on the ‘average’ rigidity of subsoil in the first few meters (e.g. Vs30) can hardly be effective. Here it is proposed a simplified soil classification approach that takes into account the basic Physics of seismic amplification and its parameters, i.e. the average shear wave velocity of the cover layer, the resonance frequency and the impedance contrast between the cover and the bedrock, which we summarize as VfZ. A possible classification approach is illustrated through a set of examples.     

A coquinoid tsunamite from the Pliocene of Salento (SE Italy)

A Pliocene composite shell concentration from a shallow-marine carbonate succession located in the small, slowly subsiding Novoli graben (Salento peninsula, Puglia, S-Italy) is interpreted as a tsunamite. This interpretation is based on taphonomic, palaeoecological and sedimentologic features. The deposit appears to drape the previous substrate, with thinning on the topographic highs and thickening in the lows, and consists of up to six sub-layers showing repeated grading (normal and reverse), suggesting that deposition occurred during up to six surges. The shell assemblage results from a chaotic mixing of taxa spanning a large spectrum of environments and taphonomic features. Although a fraction of broken shells is present, most shells are integral, suggesting a transport mechanism preventing strong impacts. On the other hand, the high comminution of skeletal remains occurring in the matrix of the deposit is thought to reflect the composition of sea-floor sediment before the inferred high-energy event.The predominance of displaced, but still articulated valves indicates that bivalves were mostly transported while still alive, after having been lifted from the sea bed. Exhumation, displacement, and large-scale transport of large-sized, deep-infaunal organisms (such as Panopea) implies that across relatively large areas the upper few decimetres of the middle–inner shelf floor were eroded by highly turbulent flows of exceptional intensity. A transport as turbulent suspension, very rapid deposition and immediate and permanent burial are strongly suggested by the general integrity of the shells indicating limited effects of physical damage and lack of biological alteration. The variable faunal characteristics of the unit lying below the inferred tsunamite suggest that deposition of the latter took place in settings ranging from a somewhat restricted, relatively low-energy bay, to a more open inner-shelf environment.     

Present activity and seismogenic potential of a low-angle normal fault system (Città di Castello,Italy): Constraints from surface geology,seismic reflection data and seismicity

We present new constraints on an active low-angle normal fault system in the Città di Castello–Sansepolcro basin (CSB) of the northern Apennines of Italy. New field data from the geological survey of the Carta Geologica d'Italia (CARG project) define the surface geometry of the normal fault system and lead to an interpretation of the CROP 03 deep-crust seismic reflection profile (Castiglion Fiorentino–Urbania segment), with particular attention paid to the geometry of the Plio-Quaternary extensional structures. Surface and sub-surface geological data are integrated with instrumental and historical seismicity in order to define the seismotectonics of the area.Low-angle east-dipping reflectors are the seismic expression of the well-known Altotiberina Fault (AF), a regional extensional detachment on which both east- and west-dipping high-angle faults, bounding the CSB, sole out. The AF breakaway zone is located ～ 10 km west of the CSB. Within the extensional allochthon, synthetic east-dipping planes prevail. Displacement along the AF is ～ 4.5 km, which agrees with the cumulative offset due to its synthetic splays. The evolution of the CSB has mainly been controlled by the east-dipping fault system, at least since Early Pleistocene time; this system is still active and responsible for the seismicity of the area. A low level of seismic activity was recorded instrumentally within the CSB, but several damaging earthquakes have occurred in historical times. The instrumental seismicity and the intensity data points of the largest historical earthquakes (5 events with maximum MCS intensity of IX to IX–X) allow us to propose two main seismogenic structures: the Monte Santa Maria Tiberina (Mmax = 5.9) and Città di Castello (Mmax up to 6.5) normal faults. Both are synthetic splays of the AF detachment, dipping to the NE at moderate (45–50°) to low (25–30°) angles and cutting the upper crust up to the surface. This study suggests that low-angle normal faults (at least with dips of 25–30°) may be seismogenic.     

Rainfall thresholds for landslide occurrence: systematic underestimation using coarse temporal resolution data

Natural Hazards - Rainfall thresholds for landslides occurrence derived in real applications tend to be lower than the ones one would obtain using exact data. This letter shows how the use of...     

Contrasting environmental effects of astronomically driven climate change on three Eocene hemipelagic successions from the Basque–Cantabrian Basin

Several processes can contribute to the formation of hemipelagic limestone–marl alternations as a consequence of astronomically driven climate change. The aim of this study was to decipher which environmental factors governed the formation of three Eocene hemipelagic successions of the Basque–Cantabrian Basin using a comprehensive set of physical and bulk carbonate geochemical data (bed thickness, mineralogy, %CaCO₃, δ¹³C and δ¹⁸O). The results show that the significance of several environmental processes varied depending on the palaeogeographic setting and eccentricity‐modulated precessional seasonality. In the Sopelana starved deep‐sea basin, limestones were formed as a consequence of high pelagic carbonate productivity during periods of warm seawater and sluggish circulation, which corresponded with periods of low seasonality (summers at aphelion); conversely, marls accumulated when pelagic carbonate productivity decreased during periods with cooler waters and more vigorous circulation, which occurred when seasonality was higher (summers at perihelion). In the Gorrondatxe submarine fan fringe, marls accumulated when high seasonality produced significant continental rainfall and run‐off, causing the dilution of pelagic carbonate sedimentation with terrigenous supplies. In the Oyambre upper slope, marls also accumulated when seasonality was high, as pelagic carbonate productivity decreased due to both the expansion of low‐salinity waters on the ocean surface and the increase in continentally derived nutrients, which caused detrimental seawater conditions for calcareous plankton. Both in Gorrondatxe and Oyambre, limestones accumulated when boreal summer at aphelion caused low seasonality, which allowed relatively stable conditions to prevail. At minimum eccentricity, when precession‐driven seasonality contrast diminished, changes in pelagic carbonate productivity were significant in the three sections. On the contrary, at maximum eccentricity, when seasonality peaked due to summers occurring at perihelion, the effects of other environmental processes, such as continental and oceanic currents, became influential. However, the influence of these processes minimized when summertime coincided with aphelion at maximum eccentricity and seasonality was weakest.     

Potential rock fall source areas identification and rock fall propagation in the province of Potenza territory using an empirically distributed approach

In this work an overview of the potential rock fall source areas and propagation assessment in the Province of Potenza territory has been presented. The rock fall process is characterized by two steps: the detachment of blocks and subsequently their propagation along the slope. The adopted methodology, used for the first time in the study area, and the software Histofit and FlowR have been very useful tools for the preliminary assessment of rock fall susceptibility at a regional scale, in particular because they have required low data of the study area. Only the DEM may be sufficient together with an appropriate choice of the input parameters and algorithms, that is to say: calculation method, directions algorithm, inertial algorithm and friction loss function. The output of the model is a map of the rock fall source areas, the propagation probabilities and the propagation kinetic energy. The results show that the adopted methodology is successful for the identification of rock fall source areas at a regional scale and the propagation probability obtaining an interesting rock fall susceptibility map.     

DEM assessment of impact forces of dry granular masses on rigid barriers

In the design of sheltering structures/embankments for the mitigation of the risk due to rapid and long spreading landslides, a crucial role is generally played by the assessment of the impact force exerted by the flowing mass on the artificial obstacle. This paper is focused on this issue and in particular on the evaluation of the maximum impact force on the basis of the results obtained by performing an extensive numerical campaign by means of a 3D discrete element code, in which a dry granular mass is schematised as a random distribution of rigid spherical particles. The granular mass is generated just in front of the obstacle: its initial volume, velocity distribution, height, length and porosity are arbitrarily assigned, and the impact process is exclusively analysed. The initial conditions are varied to take a large variety of geometrical/mechanical factors, such as the initial front inclination, its height, the initial void ratio, the length of the impacting mass and the inter-particle friction angle, into consideration. A design formula is also proposed on the base of the obtained results and critically compared with the literature data.     

Biochemical and microbial features of shallow marine sediments along the Terra Nova Bay (Ross Sea,Antarctica)

Shallow marine sediments were collected from seven stations (three of which located at Gerlache Inlet, two at Tethys Bay, one at Adelie Cove and one just beneath the Italian Research Base) along the Terra Nova Bay coast (Ross Sea, Antarctica). Their chemical, biochemical and microbiological properties were studied in order to provide further insights in the knowledge of this Antarctic benthic ecosystem. Overall, the organic carbon (OC) represented the major fraction of total carbon (TC) and displayed concentrations similar to or slightly lower than those previously measured in Antarctic bottom sediments. The biopolymeric carbon within OC ranged from 4.1% to 19.9% and showed a wide trophic range (65–834 μg g⁻¹ d.w.). Proteins (PRT) represented on average the main biochemical class contributing to labile organic carbon, followed by lipids (LIP) and carbohydrates (CHO). The activity of aminopeptidase, β-d-glucosidase, alkaline phosphatase and esterase was checked, giving the highest values at Tethys Bay and at the deepest water sediments. The principal component analysis, which was computed considering physical, chemical (elemental and biochemical sedimentary composition) and microbiological parameters (including bacterial abundance, ectoenzymatic activities, T-RFs richness and diversity indices), allowed to obtain two main clusters (“Tethys Bay” and “other stations”). Based on data obtained, two representative 16S rRNA clone libraries using samples from Tethys Bay and Gerlache Inlet were constructed. The sequences of 171 clones were compared to those available in public databases to determine their approximate phylogenetic affiliations. Both aerobic and anaerobic bacteria were disclosed, with the majority of them affiliated with the Gamma- and Deltaproteobacteria, Bacteroidetes and Acidobacteria. The occurrence of strictly anaerobic bacteria suggests that sediments might also undergo anoxic conditions that, in turn, could favor the accumulation of PRT in respect to CHO, assuming that fermentation of amino acids is slower than that of sugars from decomposing polysaccharides.     

Suitability of LiDAR point density and derived landform curvature maps for channel network extraction

This study uses landform curvature as an approach for channel network extraction. We considered a study area located in the eastern Italian Alps where a high‐quality set of LiDAR data was available and where channel heads and related channel network were mapped in the field. In the analysis, we derived 1‐m DTMs from different ground LiDAR point densities, and we used different smoothing factors for the landscape curvature calculation in order to test the suitability of the LiDAR point density and the derived curvature maps for the recognition of channel network. This methodology is based on threshold values of the curvature calculated as multiples (1–3 times) of the standard deviation of the curvature. Our analyses suggested that (i) the window size for curvature calculations has to be a function of the size of the features to be detected, (ii) a coarse ground LiDAR point density could be as useful as a finer one for the recognition of main channel network features and (iii) rougher curvature maps are not optimal as they do not explore a sufficient range at which features occur, while smoother curvature maps overcome this problem and are more appropriate for the extraction of surveyed channels. Copyright © 2010 John Wiley & Sons, Ltd.