Sur quelques concentrations plombo-zinciferes du devonien inferieur du massif schisteux rhenan

Zusammenfassung The Lower Devonian of the Rhine Schist Massif is characterized by a fine detrital sedimentation which reflects a coastal plain environment located between the Old Red Sandstone continent in the N and the marine Bohemian Facies in the SE. Mineralisations are located within these coastal-plain sediments, especially in fractured horizons topped by pelitic and floored by sandy sediments of Sieg Emsian age. The mineralised localities occur in three zones: the districts of Bensberg, Eitorf and Mayen. The Lüderich locality (Bensberg) is the most important having approximately one million tons of Zn and Pb metal. It is localised within a zone having marked sedimentary characteristics since the Siegenian. Mineralisation occurs as penecontemporaneous lenses, fracture fillings etc, formed at abnormal contacts between lithological units having different competance during Siegenian and Lower Emsian deformation. However, locally there is lateral transition between the upper units of the sandy channel series and the lower units of the pelitic swamp facies. Vertical extension of mineralisations is strictly limited to the tectonic contact zone between the Odenspiel Sandstone and the Bensberg pelites. Study of mineralisations at various levels (mapping, morphology, structure, paragenetic and geochemical) leads to the formulation of a genetic model requiring complex fracturation at the contact between contrasting lithologies and preferential drainage through these fractured zones; metals are trapped on the sandstone floor, the pelitic roof trapping the vadose hydrothermal solutions. These basic controls seem to apply throughout the Bensberg, Eitorf and Mayen districts. On a more regional scale the age variations of the gangue sediments reflects a lateral displacement of red/grey facies limits due to coastal evolution. Thus one may demonstrate a type of mineral occurrence whose model may be that of epigenetic reconcentration within fractures affecting syngenetic geochemical anomalies.Zusammenfassung Das Unterdevon des Rheinischen Schiefergebirges wird durch eine feinkörnige detritische Sedimentation gekennzeichnet. Die Verteilung dieser detritischen Sedimente widerspiegelt eine flache Küstenlandschaft zwischen dem Kontinent des Unterrotliegenden im Norden und des Meeres mit der Böhmischen Fazies im Südosten. In diesen Schichten befinden sich gangförmige Vererzungen, die in Bruchzonen auftreten, die ein pelitisches Hangendes und ein sandsteinreiches Liegendes vom Siegen-Ems Alter haben. Die Lagerstätten kommen in drei Bezirken vor: Der Bensberger Bezirk, der Bezirk Eitorf und der Bezirk Mayen. Die Lagerstätte Lüderich (Bensberger Revier) ist die größte (ungefähr eine Million Tonnen Metall Zink+Blei). Sie befindet sich in einer Zone, in der schon in der Siegen-Stufe bemerkenswerte sedimentäre Strukturen auftreten. Die Vererzung tritt als penekonkordante Linsen, Gänge, Stockwerke in tektonischen Kontaktzonen auf. Diese Kontaktzonen befinden sich zwischen 2 verschiedenen sedimentären Einheiten, deren Gesteinseigenschaften sehr verschieden sind. Es handelt sich um Pelite mit Sandstein-Einschaltungen einerseits, die zur unteren Emsstufe gehören sollen und um fluviatile Sandsteine andererseits, die zur oberen Siegenstufe gehören sollen. Lokal ist ein lateraler Übergang durch Faziesänderung von den oberen Sandsteinen in die unteren Pelitschichten jedoch nicht unmöglich. Die Sandsteine vertreten einen fluviatilen Sedimentationsbereich, die Pelite einen sumpfigen Sedimentationsbereich. Die Vererzung (mit einer vertikalen Ausdehnung ungefähr von 300 m) tritt nur im Bereich der Kontaktzone zwischen den Odenspieler Sandsteinen und den Peliten der Unteren Bensberger Schichten auf. Die Resultate der Kartographie, der morphologischen Studie der Erzkörper, der Struktur und der Paragenese führen zu einem genetischen Modell. Dabei spielt die Anwesenheit einer Bruchstruktur an der Grenze zwischen 2 Bereichen mit verschiedenen lithologischen Eigenschaften eine Hauptrolle für die Konzentration der im Hangenden fein verteilten Metalle. Die hydrothermalen Lösungen kommen demnach nicht von der Teufe, sondern aus dem Nebengestein. Im ganzen Bensberger Erzrevier wie in der Gegend von Eitorf und in der Gegend von Mayen finden wir dieselben Leitfäden für die Vererzung in den Lagerstätten und Vorkommen. Beobachtet man die ganze Provinz, dann merkt man, daß die Altersverschiedenheiten in den Nebengesteinen der verschiedenen Lagerstätten eine geographische Wanderung der Faziesgrenze zwischen rot und grau in dieser küstennahen Ebene Widerspiegeln. Die verschiedenen Vorkommen und Lagerstätten treten immer in unmittelbarer Nähe dieser Grenze auf. Die Eigenschaften dieser Lagerstätten weisen auf eine Bildung durch eine epigenetische Umlagerung in eine gangförmige Bruchstruktur hin.     

Schorlomite: a discussion of the crystal chemistry, formula, and inter-species boundaries

Examination of schorlomite from ijolite at Magnet Cove (USA) and silicocarbonatite at Afrikanda (Russia), using electron-microprobe and hydrogen analyses, X-ray diffraction and Mössbauer spectroscopy, shows the complexity of substitution mechanisms operating in Ti-rich garnets. These substitutions involve incorporation of Na in the eightfold-coordinated X site, Fe²⁺ and Mg in the octahedrally coordinated Y site, and Fe³⁺, Al and Fe²⁺ in the tetrahedrally coordinated Z site. Substitutions Ti⁴⁺Fe³⁺Fe³⁺_–1Si_–1 and Ti⁴⁺Al³⁺Fe³⁺_–1Si_–1 are of major significance to the crystal chemistry of schorlomite, whereas Fe²⁺ enters the Z site in relatively minor quantities (<3% Fe). There is no evidence (either structural or indirect, such as discrepancies between the measured and calculated Fe²⁺ contents) for the presence of ^[6]Ti³⁺ or ^[4]Ti⁴⁺ in schorlomite. The simplified general formula of schorlomite can be written as Ca₃Ti⁴⁺₂[Si_3-x(Fe³⁺,Al,Fe²⁺)_xO₁₂], keeping in mind that the notion of end-member composition is inapplicable to this mineral. In the published analyses of schorlomite with low to moderate Zr contents, x ranges from 0.6 to 1.0, i.e. Ti⁴⁺ in the Y site is <2 and accompanied by appreciable amounts of lower-charged cations (in particular, Fe³⁺, Fe²⁺ and Mg). For classification purposes, the mole percentage of schorlomite can be determined as the amount of ^[6]Ti⁴⁺, balanced by substitutions in the Z site, relative to the total occupancy in the Y site: (^[6]Ti⁴⁺–^[6]Fe²⁺–^[6]Mg²⁺– ^[8]Na⁺)/2. In addition to the predominant schorlomite component, the crystals examined in this work contain significant (>15 mol.%) proportions of andradite (Ca₃Fe³⁺₂Si₃O₁₂), morimotoite (Ca₃Fe²⁺TiSi₃O₁₂), and Ca₃MgTiSi₃O₁₂. The importance of accurate quantitative determination and assignment of Fe, Ti and other cations to the crystallographic sites for petrogenetic studies is discussed.

The hard solar X-ray burst of 18 September 1963

A hard solar X-ray burst was observed by J-P. Legrand on 18 September 1963, 13:56 UT, at balloon altitude. It lasted a few minutes; a steep increase was followed by an exponential decay. During its declining phase a weak radio burst was observed on 3 and 10 cm, not on longer wavelengths.Maximum radio intensity occurred two minutes after that of the X-ray burst. The X-ray and radio bursts ended almost simultaneously. Optically a small shortlived (some minutes) flare point occurred simultaneously with the X-ray burst in a magnetically interesting part of the active region of September 1963. The X-burst photons seem to have had an energy of about 0.5 MeV. The burst was therefore of a fairly rare type, since very few other bursts with similar photon energies have been detected up to now.It is suggested that a mass of gas, magnetically confined to a volume of about 5·10²⁵ cm³ in the low corona, containing about 3·10³⁵ electrons was accelerated to energies of about 0.5 MeV. The gas gradually expanded, partly also to higher levels. The gyro-synchrotron radiation, emitted by the plasma became observable after about two minutes. At the lower radio frequencies the radiation was absorbed by overlying undisturbed coronal matter. Quantitative computations justify this model. A detailed summary of the events, and some numerical data are given in the concluding Section 8 and in Table V.     

Validation of an annual cycle simulation with a T42-L20 GCM

An annual cycle of an atmospheric general circulation model (AGCM) is presented. The winter and summer zonal averages of the atmospheric fields are compared with an observed climatology. The main features of the observed seasonal means are well reproduced by the model. One of the main discrepancies is that the simulated atmosphere is too cold, particularly in its upper part. Some other discrepancies might be explained by the interannual variability. The AGCM surface fluxes are directly compared to climatological estimates. On the other hand, the calculation of meridional heat transport by the ocean, inferred from the simulated energy budget, can be compared to transport induced from climatologies. The main result of this double comparison is that AGCM fluxes generally are within the range of climatological estimates. The main deficiency of the model is poor partitioning between solar and non-solar heat fluxes in the tropical belt. The meridional heat transport also reveals a significant energy-loss by the Northern Hemisphere ocean north of 45° N. The possible implications of model surface flux deficiencies on coupling with an oceanic model are discussed.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute for Meteorology. Guest Editor for these papers is Dr. L. Dümenil     

Invariant manifolds, phase correlations of chaotic orbits and the spiral structure of galaxies

In the presence of a strong   m = 2  component in a rotating galaxy, the phase-space structure near corotation is shaped to a large extent by the invariant manifolds of the short-period family of unstable periodic orbits terminating at L ₁ or L ₂. The main effect of these manifolds is to create robust phase correlations among a number of chaotic orbits large enough to support a spiral density wave outside corotation. The phenomenon is described theoretically by soliton-like solutions of a Sine–Gordon equation. Numerical examples are given in an N -body simulation of a barred spiral galaxy. In these examples, we demonstrate how the projection of unstable manifolds in configuration space reproduces essentially the entire observed bar–spiral pattern.     

Fast integration of low orbiter's trajectory perturbed by the earth's non-sphericity

A fast algorithm is proposed to integrate the trajectory of a low obiter perturbed by the earth's non-sphericity. The algorithm uses a separation degree to define the low-degree and the high-degree acceleration components, the former computed rigorously, and the latter interpolated from gridded accelerations. An FFT method is used to grid the accelerations. An optimal grid type for the algorithm depends on the trajectory's permissible error, speed, and memory capacity. Using the non-spherical accelerations computed from EGM96 to harmonic degree 360, orbit integrations were performed for a low orbiter at an altitude of 170 km. For a separation degree of 50, the new algorithm, together with the predict-pseudo correct method, speeds up the integration by 145 times compared to the conventional algorithm while keeping the errors in position and velocity below 10⁻⁴ m and 10⁻⁷ m/s for a 3-day arc. Received: 28 July 1997 / Accepted: 1 April 1998     

Reference frame stability and nonlinear distortion in minimum-constrained network adjustment

The aim of this paper is to investigate the influence of the minimum constraints (MCs) on the reference frame parameters in a free-net solution. The non-estimable part of these parameters (which is not reduced by the available data) is analysed in terms of its stability under a numerical perturbation of the constrained datum functionals. In practice, such a perturbation can be ascribed either to hidden errors in the known coordinates/velocities that participate in the MCs or to a simple change of their a priori values due to a datum switch on a different fiducial dataset. In addition, a perturbation of this type may cause a nonlinear variation to the estimable part of the reference frame parameters, since it theoretically affects the adjusted observations that are implied by the network’s nonlinear observational model. The aforementioned effects have an impact on the quality of a terrestrial reference frame (TRF) that is established via a minimum-constrained adjustment, and our study shows that they are both controlled through a characteristic matrix which is inherently linked to the MC system (the so-called TRF stability matrix). The structure of this matrix depends on the network’s spatial configuration and the ‘geometry’ of the datum constraints, while its main role is the filtering of any MC-related errors into the least-squares adjustment results. A number of examples with different types of geodetic networks are also presented to demonstrate the theoretical findings of our study.     

A Comparison between WCS and OPeNDAP for Making Model Results and Data Products Available through the Internet

Numerical models produce output with a large number of variables, grid cells and time steps. The same applies to algorithms that produce gridded datasets from sparse or abundant raw data. Further use of the resulting data products has been challenging, especially for dissemination outside the institute of origin. Due to the gradually increasing size of data products, simply downloading copies of them is becoming impossible. A gradual transition from traditional download methods to web services is therefore observed. Web services allow for on‐the‐fly access to subsets of data that were hitherto considered as indivisible granules. Here we compare the most mature candidates to serve gridded data through the web: the Open‐source Project for a Network Data Access Protocol (OPeNDAP) and Web Coverage Service (WCS) protocols. In the framework of the new Dutch National Model and Data Centre (NMDC.eu) a distributed data storage has been created by coupling OPeNDAP servers. A WCS service layer is provided for the same data. This allows us to compare OPeNDAP and WCS. Using several use cases, we compare the usability, performance and features of the two protocols.     

Earth Observation Scientific Workflows in a Distributed Computing Environment

Geospatially Enabled Scientific Workflows offer a promising toolset to help researchers in the earth observation domain with many aspects of the scientific process. One such aspect is that of access to distributed earth observation data and computing resources. Earth observation research often utilizes large datasets requiring extensive CPU and memory resources in their processing. These resource intensive processes can be chained; the sequence of processes (and their provenance) makes up a scientific workflow. Despite the exponential growth in capacity of desktop computers, their resources are often insufficient for the scientific workflow processing tasks at hand. By integrating distributed computing capabilities into a geospatially enabled scientific workflow environment, it is possible to provide researchers with a mechanism to overcome the limitations of the desktop computer. Most of the effort on extending scientific workflows with distributed computing capabilities has focused on the web services approach, as exemplified by the OGC's Web Processing Service and by GRID computing. The approach to leveraging distributed computing resources described in this article uses instead remote objects via RPyC and the dynamic properties of the Python programming language. The Vistrails environment has been extended to allow for geospatial processing through the EO4Vistrails package ( http://code.google.com/p/eo4vistrails/ ). In order to allow these geospatial processes to be seamlessly executed on distributed resources such as cloud computing nodes, the Vistrails environment has been extended with both multi‐tasking capabilities and distributed processing capabilities. The multi‐tasking capabilities are required in order to allow Vistrails to run side‐by‐side processes, a capability it does not currently have. The distributed processing capabilities are achieved through the use of remote objects and mobile code through RPyC.     

Applications of AnnAGNPS model for soil loss estimation and nutrient loading for Malaysian conditions

The study evaluated the performance and suitability of AnnAGNPS model in assessing runoff, sediment loading and nutrient loading under Malaysian conditions. The watershed of River Kuala Tasik in Malaysia, a combination of two sub-watersheds, was selected as the area of study. The data for the year 2004 was used to calibrate the model and the data for the year 2005 was used for validation purposes. Several input parameters were computed using methods suggested by other researchers and studies carried out in Malaysia. The study shows that runoff was predicted well with an overall R² value of 0.90 and E value of 0.70. Sediment loading was able to produce a moderate result of R² = 0.66 and E = 0.49, nitrogen loading predictions were slightly better with R² = 0.68 and E = 0.53, and phosphorus loading performance was slightly poor with an R² = 0.63 and E = 0.33. The erosion map developed was in agreement with the erosion risk map produced by the Department of Agriculture, Malaysia. Rubber estates and urban areas were found to be the main contributors to soil erosion. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for planning and management of watersheds under Malaysian conditions.