Silver and silver microparticles of the Cretaceous-Paleogene boundary sediment of Fish Clay Højerup (Stevns Klint,Denmark)

We report the occurrence of micrometer-sized silver particles in the red (“impact” or “ejecta”) layer of the Fish Clay. These appear to be embedded into the biogenic/abiogenic calcite matrix. Energy dispersive X-ray analysis indicates that these microparticles are composed of pure silver (>99% of the total weight). Scanning electron microscopy images reveal irregular and predominantly rounded shapes with rugged surfaces. Numerous silver microparticles are spherical, and some exhibit dendritic textures. These microparticles were probably originated during the Chicxulub asteroid impact event, or immediately afterwards, and dispersed globally.     

Hazards and Risks of Recreational Water Use: Vectors of International Studies. Effects of Recreation on Ecosystems and Biota

Water Resources - English-language publications on the assessment of hazards and risks in recreation water use are reviewed. The main themes and results of foreign studies into the effect of...     

Distance estimate of M31 based on the size distribution of Hii regions and dark clouds

The size distribution of dark clouds and of H II regions were used to derive a distance of 440±22 kpc for M31. Some galactic H II regions and dark clouds were combined with the same ingredients in M31 to study the mass spectrum of both phenomena. A gas to dust ratio of 10001 has been derived for M31. Radii of the classical H II regions as derived in this work using distance of 440 kpc agrees with the galactic classical H II region radii.     

Photo—gravitational effects in the two—body problem

The effect of the radiation-pressure in the problem of the two bodies is analysed. It is found that such an effect is the same as that of reducing the stellar mass, m, by the factor p (0 ≤ p ≤ 1). The case p < 0 leads to stellar instability and, consequently, it is not considered here. The problem of the mass determination from spectroscopic observations is reviewed and an iterative method is recommended.     

Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

The Magma Feeding System of the Klyuchevskaya Group of Volcanoes (Kamchatka)

Doklady Earth Sciences - Using observations from a large-scale seismic station network, we built a seismic tomography model of velocity anomalies for longitudinal (P-wave) and transverse (S-wave)...     

The Crust–Mantle Carbon Cycle and Origin of Abiogenic Hydrocarbons

Oceanology - Abstract—The paper studies carbon transformation and transfer processes in the crust and mantle. Sediments dragged into subduction zones are dewatered, broken down, and altered...     

Primitive island arc and oceanic lavas from the hunter ridge-hunter fracture zone. Evidence from glass,olivine and spinel compositions

Summary At its southernmost end, the main spreading centre of the North Fiji Basin is propagating into arc crust of the poorly-known Hunter Ridge. We define nine magmatic groups from major element glass chemistry and olivine and spinel compositions in samples dredged from twenty six sites in this area by the R/V Academician A. Nesmeyanov in 1990. These include groups of boninites, island arc tholeiites (IAT), mid-ocean ridge basalts (MORB), enriched mid-ocean ridge basalts (E-MORB), olivine porphyritic andesites and basaltic andesite and Na-rhyolites. Primitive lavas containing highly forsteritic olivine phenocrysts are common in all the groups, except for the rhyolites.We report over 100 glass analyses for dredged rocks from this region, and about 300 olivine-spinel pairs for representatives of all the magmatic groups identified, except the Na-rhyolites.The MORB in this region are probably produced at the propagating spreading centre in the southern part of the North Fiji Basin. Juxtaposition of shallow, hot MORB-source diapirs supplying the MORB in this area, and the sub-arc damp, refractory upper mantle beneath the Hunter Ridge, provides suitable petrogenetic conditions to produce a range of magma types, from island arc tholeiites through to high-Ca boninites. The latter were recovered in eleven dredges.The E-MORB lavas recovered from the extreme southern margin of the North Fiji Basin are shown to be essentially identical to those dredged from adjacent older South Fiji Basin crust. It is hypothesized that the former were either scraped off the South Fiji Basin crust during an episode of oblique subduction that may have generated the Hunter Ridge during the last 5 Myr, or alternatively, that slices of the South Fiji Basin crust were trapped and incorporated into the North Fiji Basin as the subduction zones fronting the Vanuatu arc stepped or propagated southward.

---

Primitive Inselbogen- und ozeanische Laven von Hunter Rücken und der Hunter BruchZone: die Bedeutung der Zusammensetzung von Glas, Olivin und Spinell

Zusammenfassung Das spreading centre des Nord-Fidschi-Beckens setzt sich an seinem südlichsten Ende in die Inselbogen-Kruste des noch wenig bekannten Hunter-Rückens fort.Wir definieren 9 magmatische Gruppen auf der Basis der Hauptelement-Zusammensetzung von Gläsern und der Zusammensetzung von Olivin und Spinell in Proben die das Forschungsschiff R/V Akademiker A. Nesmeyanov von 26 Stellen im Jahr 1990 aufgesammelt hat. Zu diesen gehören Gruppen von Boniniten, Inselbogentholeiiten (IAT), Basalten zentralozeanischer Rücken (MORB), angereicherte zentralozeanische Rücken (E-MORB), Olivin-porphyritische Andesite und basaltische Andesite, sowie Na-Rhyolite. Primitive Laven mit Olivinkristallen, die reich an Forsterit-Komponenten sind, kommen in allen diesen Gruppen, mit Ausnahme der Rhyolite, vor.Wir legen über 100 Glas-Analysen von Gesteinen aus diesem Gebiet vor und über 300 Olivin-Spinell-Paare für Vertreter aller der hier identifizierten magmatischen Gruppen, mit Ausnahme der Natriumrhyolite.Die MORB in diesem Gebiet sind wahrscheinlich an dem aktiven Spreading Center im Südteil des Nord-Fidschi-Beckens entstanden. Das nebeneinander Vorkommen von seichten heißen MORB-Quellen Diapiren, die MORB in diesem Gebiet erzeugen, und der Sub-Inselbogen, wasserhaltige, refraktäre obere Mantel unter dem Hunter Rücken führen zu geeigneten petrogenetischen Bedingungen für die Entstehung einer Vielfalt von Magmatypen, von Inselbogentholeiiten bis zu sehr Kalziumreichen Boniniten. Die letzteren wurden in 11 Dredge-Proben gefunden.Die E-MORS Laven, die aus dem extremen Südteil des Nord-Fidschi-Beckens entnommen wurden, sind im wesentlichen mit jenen identisch, die aus der benachbarten älteren Kruste des Süd-Fidschi-Beckens stammen. Es wird vermutet, daß die letzteren entweder aus dem Süd-Fidschi-Becken während einer Episode obliger Subduktion, die in den letzten 5 Millionen Jahren zur Entstehung des Hunter Ridge geführt hat, abgeschert wurden, oder auch daß Teile der Kruste des Süd-Fidschi-Beckens in das Nord-Fidschi-Becken inkorporiert wurden als Subduktionszonen gegenüber dem Vanuato-Bogen sich nach Süden fortbewegten.

     

Tuning a physically-based model of the air–sea gas transfer velocity

Air–sea gas transfer velocities are estimated for one year using a 1-D upper-ocean model (GOTM) and a modified version of the NOAA–COARE transfer velocity parameterization. Tuning parameters are evaluated with the aim of bringing the physically based NOAA–COARE parameterization in line with current estimates, based on simple wind-speed dependent models derived from bomb-radiocarbon inventories and deliberate tracer release experiments. We suggest that A = 1.3 and B = 1.0, for the sub-layer scaling parameter and the bubble mediated exchange, respectively, are consistent with the global average CO₂ transfer velocity k. Using these parameters and a simple 2nd order polynomial approximation, with respect to wind speed, we estimate a global annual average k for CO₂ of 16.4 ± 5.6 cm h^?1 when using global mean winds of 6.89 m s^?1 from the NCEP/NCAR Reanalysis 1 1954–2000. The tuned model can be used to predict the transfer velocity of any gas, with appropriate treatment of the dependence on molecular properties including the strong solubility dependence of bubble-mediated transfer. For example, an initial estimate of the global average transfer velocity of DMS (a relatively soluble gas) is only 11.9 cm h^?1 whilst for less soluble methane the estimate is 18.0 cm h^?1.