The Late Pleistocene clastic deposits in the Romito Cave,southern Italy: a proxy record of environmental changes and human presence

Clastic sediments deposited in caves and rock shelters bear peculiar sedimentological characteristics and have seldom been considered as a high‐resolution proxy record of climatic or environmental changes. The Romito Cave has its entrance at 275 m above sea level, about 25 km from the Tyrrhenian coast of Calabria, southern Italy. New archaeological excavation performed since 2000 has revealed a sedimentary succession spanning the record of Gravettian to Late Epigravettian cultures (Late Pleistocene). The present study focuses on the lower part (2.5 m thick) of the succession, where three main unconformity‐bounded stratigraphic units have been recognised (labelled RM1–3). Each unit consists of water‐lain deposits indicating high‐ to low‐competence flow, capped with anthropogenic deposits. The gradual deactivation and reactivation of the water drainage between 23 475 ± 190 and 16 250 ± 500 cal. a BP is correlated with regional precipitation changes due to the onset of dry climatic conditions of the Last Glacial Maximum. However, the deactivation of cave drainage after the deposition of unit RM3, around 15 400 ± 500 cal. a BP, deviates from the regional hydrological trend of progressively increasing water discharges and is attributed to the drainage cut‐off by probable cave wall collapses. Copyright © 2008 John Wiley & Sons, Ltd.     

The rate of sedimentation from turbulent suspension: An experimental model with application to pyroclastic density currents and discussion on the grain‐size dependence of flow runout

Large‐scale experiments generating ground‐hugging multiphase flows were carried out with the aim of modelling the rate of sedimentation, of pyroclastic density currents. The current was initiated by the impact on the ground of a dense gas‐particle fountain issuing from a vertical conduit. On impact, a thick massive deposit was formed. The grain size of the massive deposit was almost identical to that of the mixture feeding the fountain, suggesting that similar layers formed at the impact of a natural volcanic fountain should be representative of the parent grain‐size distribution of the eruption. The flow evolved laterally into a turbulent suspension current that sedimented a thin, tractive layer. A good correlation was found between the ratio of transported/sedimented load and the normalized Rouse number of the turbulent current. A model of the sedimentation rate was developed, which shows a relationship between grain size and flow runout. A current fed with coarser particles has a higher sedimentation rate, a larger grain‐size selectivity and runs shorter than a current fed with finer particles. Application of the model to pyroclastic deposits of Vesuvius and Campi Flegrei of Southern Italy resulted in sedimentation rates falling inside the range of experiments and allowed definition of the duration of pyroclastic density currents which add important information on the hazard of such dangerous flows. The model could possibly be extended, in the future, to other geological density currents as, for example, turbidity currents.     

Complexity in Sequences of Solar Flares and Earthquakes

In this paper the statistical properties of solar flares and earthquakes are compared by analyzing the energy distributions, the time series of energies and interevent times, and, above all, the distributions of interevent times per se. It is shown that the two phenomena have different statistics of scaling, and even the same phenomenon, when observed in different periods or at different locations, is characterized by different statistics that cannot be uniformly rescaled onto a single, universal curve. The results indicate apparent complexity of impulsive energy release processes, which neither follow a common behaviour nor could be attributed to a universal physical mechanism.     

Small‐scale experimental simulation of talus evolution

We investigated a small‐scale laboratory model of a talus slope evolution. Five different size classes of basaltic rock were selected and marked with different colours. Homogenized mixtures of grains of different sizes were dropped from a fixed height onto a tilted experimental board covered with a loose granular layer. This was conducted in a series of regular sequences, and the resulting distribution on the board was studied after each sequence. At the beginning of the experiment, the grains developed a longitudinal gradation similar to natural talus slopes, where small grains settle at the top while the large ones roll down to the distal part. However, after a transient period dominated by single‐particle dynamics on the inert granular medium, the evolution proved to be more variable than expected. Due to the continuous shower of falling grains, the shear stress at the bottom of the upper granular layer increased. This resulted initially in a slow creep down slope that finally collapsed in large avalanches homogenizing the material. The slides occurred at the boundary between a weaker layer created by migration of small grains through the interstices, and marked by a vertical transition between small and large grains. We compare the experimental findings with observations from natural talus slopes, and suggest that similar experiments may be helpful in understanding the evolution of taluses. Copyright © 2009 John Wiley & Sons, Ltd.     

Sar Interferometry And Its Applications

Satellite mounted Synthetic Aperture Radars (SAR) provide informationof the amplitude of the backscatterer its phase. This corresponds to the totaltravel time (source receiver and back), plus the phase of the scatterer itself.SAR interferometry yields the image of the differences of the phases takenin two successive passes. Or in the same pass if two receivers are availableon board; these images give a good digital elevation model of the terrain,with a vertical resolution that could be in the meter range. Millimetric motionof large areas of the terrain or of corner reflectors can also be measured withgood reliability; the system then measures subsidence, co-seismic motions andsmall motions of buildings and constructions. The coherence of t e interferometric pair, i.e., the permanence of the scattering characteristics of the terrain from one pass to the next combined with the more usual backscatterer amplitude, leads to high quality image segmentation. The possibilities and the limits of this technique are summarized.     

Evaluation of lindane diffusion along the southeastern Adriatic coastal strip (Mediterranean Sea): a case study in an Albanian industrial area

This study aimed to analyze the impact at sea of a pesticide factory located 7 km north of Durres (Albania) by investigating a lowland area under the sea situated 0.7 km from the shoreline. The main product of this factory was lindane. Production ceased in 1991 during the Albanian civil war, and a large amount of industrial waste was dispersed over the ground surrounding the factory, resulting in a high level of lindane pollution. A water-scoop channels the ground water accumulated around the disused factory directly into the sea. The concentrations of lindane in sediments collected along the coasts of the region ranged from 0.60 to 22.55 ng g(-1). The average concentration in the muscles of fish did not exceed the limits specified by European Commission legislation, whereas the concentration in the liver did exceed these limits; consequently, liver is not recommended for consumption.     

Land subsidence along the Ionian coast of SE Sicily (Italy), detection and analysis via Small Baseline Subset (SBAS) multitemporal differential SAR interferometry

The paper presents the results of a multi‐temporal, differential interferometric synthetic aperture radar (DInSAR) analysis aiming to identify active surface deformation phenomena in south‐eastern Sicily. The study area has been chosen because of its strong seismicity, high concentration of industrial and agricultural activities, and high density of people living in the coastal area. Furthermore, the morphology, lithology and climatic features of this sector of the Hyblean foreland are suitable for an interferometric analysis, providing a high coherence over the area. The Small BAseline Subset (SBAS) multitemporal DInSAR technique was used to calculate mean ground velocity maps and displacement time series from a large data set of European Remote Sensing Satellites (ERS 1–2) images spanning the time period 1992–2000. The reliability of the DInSAR results was tested calculating the East_SAR and Up_SAR values over two permanent global positioning system (GPS) stations in the area, and comparing them with the East_GPS and Up_GPS values. The residuals between GPS and DInSAR velocities were 1 and 0.6 mm/yr for the Up and East components, respectively. Four main subsiding areas, previously undetected, have been identified, corresponding with the towns of Augusta, Siracusa, Priolo, and Villasmundo. The observed deformation phenomena are located within coastal structural basins, filled with Pleistocene and Holocence deposits, except the Villasmundo land subsidence, which is located on the Hyblean plateau. The measured deformation rates reach values up to ?18 mm/yr in Augusta, –6 mm/yr in Siracusa, –5 mm/yr in Villasmundo and ?4.5 mm/yr in Priolo. The examination of velocity profiles, time series, and geological data allows us to relate all the detected deformation patterns primarily to groundwater over‐exploitation. A multi‐dimensional interpolation with kriging was performed to obtain a field subsidence map. A first‐order elastic deformation model was used to simulate the peculiar features of the Villasmundo subsidence. Copyright © 2011 John Wiley & Sons, Ltd.     

Appraisal problem in the 3D least squares Fourier seismic data reconstruction

Least squares Fourier reconstruction is basically a solution to a discrete linear inverse problem that attempts to recover the Fourier spectrum of the seismic wavefield from irregularly sampled data along the spatial coordinates. The estimated Fourier coefficients are then used to reconstruct the data in a regular grid via a standard inverse Fourier transform (inverse discrete Fourier transform or inverse fast Fourier transform). Unfortunately, this kind of inverse problem is usually under‐determined and ill‐conditioned. For this reason, the least squares Fourier reconstruction with minimum norm adopts a damped least squares inversion to retrieve a unique and stable solution. In this work, we show how the damping can introduce artefacts on the reconstructed 3D data. To quantitatively describe this issue, we introduce the concept of “extended” model resolution matrix, and we formulate the reconstruction problem as an appraisal problem. Through the simultaneous analysis of the extended model resolution matrix and of the noise term, we discuss the limits of the Fourier reconstruction with minimum norm reconstruction and assess the validity of the reconstructed data and the possible bias introduced by the inversion process. Also, we can guide the parameterization of the forward problem to minimize the occurrence of unwanted artefacts. A simple synthetic example and real data from a 3D marine common shot gather are used to discuss our approach and to show the results of Fourier reconstruction with minimum norm reconstruction.