Chironomid assemblages in cores from multiple water depths reflect oxygen-driven changes in a deep French lake over the last 150 years

We sampled modern chironomids at multiple water depths in Lake Annecy, France, before reconstructing changes in chironomid assemblages at sub-decadal resolution in sediment cores spanning the last 150 years. The lake is a large, deep (z_max = 65 m), subalpine waterbody that has recently returned to an oligotrophic state. Comparison between the water-depth distributions of living chironomid larvae and subfossil head capsules (HC) along three surface-sediment transects indicated spatial differences in the influence of external forcings on HC deposition (e.g. tributary effects). The transect with the lowest littoral influence and the best-preserved, depth-specific chironomid community characteristics was used for paleolimnological reconstructions at various water depths. At the beginning of the twentieth century, oxygen-rich conditions prevailed in the lake, as inferred from M. contracta-type and Procladius sp. at deep-water sites (i.e. cores from 56 to 65 m) and Paracladius sp. and H. grimshawi-type in the core from 30 m depth. Over time, chironomid assemblages in cores from all three water depths converged toward the dominance of S. coracina-type, indicating enhanced hypoxia. The initial change in chironomid assemblages from the deep-water cores occurred in the 1930s, at the same time that an increase in lake trophic state is inferred from an increase in total organic carbon (TOC) concentration in the sediment. In the 1950s, an assemblage change in the core from 30 m water depth reflects the rapid expansion of the hypoxic layer into the shallower region of the lake. Lake Annecy recovered its oligotrophic state in the 1990s. Chironomid assemblages, however, still indicate hypoxic conditions, suggesting that modern chironomid assemblages in Lake Annecy are decoupled from the lake trophic state. Recent increases in both TOC and the hydrogen index indicate that changes in pelagic functioning have had a strong indirect influence on the composition of the chironomid assemblage. Finally, the dramatic decrease in HC accumulation rate over time suggests that hypoxic conditions are maintained through a feedback loop, wherein the accumulation of (un-consumed) organic matter and subsequent bacterial respiration prevent chironomid re-colonization. We recommend study of sediment cores from multiple water depths, as opposed to investigation of only a single core from the deepest part of the lake, to assess the details of past ecological changes in large deep lakes.     

Reassessment of Prejanopterus curvirostris,a Basal Pterodactyloid Pterosaur from the Early Cretaceous of Spain

Prejanopterus curvirostra, from the Early Cretaceous of La Rioja province, was the first pterosaur genus and species described from Spain. The material comprises disarticulated cranial and postcranial remains from several individuals. The fossil-bearing bed is assigned to the lacustrine Leza Formation (eastern Cameros Basin, NW margin of the Iberian Range). This unit is regarded as either Berriasian-Valanginian or Barremian-Aptian. Prejanopterus curvirostris (specific name emended) was originally diagnosed on the basis of several characters of which the most significant was a lateral curvature of the rostrum. Re-examination of the holotype (rostrum) and paratype (partial rostrum with teeth) indicates that there is no genuine sideways bend of the preserved premaxilla-maxilla segments, but a slight dorsal curvature. Prejanopterus is characterized by a unique combination of characters: an emended diagnosis is provided. In contrast with previous estimates, the wing span of Prejanopterus was probably not much (if ever) in excess of 2 m. A phylogenetic analysis suggests that Prejanopterus is a basal pterodactyloid positioned between Pterodactylus and Cycnorhamphus-Gallodactylus. Prejanopterus represents the first evidence of Pterodactylidae in the Early Cretaceous of the Iberian Peninsula.     

Mechanical behaviour and failure of cohesive granular materials

We investigate the stress–strain behaviour and failure of a cohesive granular material both by experiments and numerical simulations. The material is an assembly of aluminium rods glued together by means of an epoxy resin. The behaviour of cohesive bonds (force–displacement relationship, failure conditions) is characterized by performing simple loading tests (tension/compression, shear…) on a couple of rods. Then, this local behaviour is introduced in a numerical code based on a discrete element method in order to perform numerical compression tests on large samples. The validation of this approach was the main goal of the present investigation that is essentially achieved by a direct comparison between the numerical results and similar experimental tests. As a basic application, we derive the macroscopic cohesion and friction characteristics of random cohesive materials by systematic numerical simulations in a biaxial geometry. Copyright © 2004 John Wiley & Sons, Ltd.     

Rhone River flood deposits in Lake Le Bourget: a proxy for Holocene environmental changes in the NW Alps, France

The Holocene evolution of Rhone River clastic sediment supply in Lake Le Bourget is documented by sub-bottom seismic profiling and multidisciplinary analysis of well-dated sediment cores. Six high-amplitude reflectors within the lacustrine drape can be correlated to periods of enhanced inter- and underflow deposition in sediment cores. Based on the synthesis of major environmental changes in the NW Alps and on the age-depth model covering the past 7500 years in Lake Le Bourget, periods of enhanced Rhone River flood events in the lake can be related to abrupt climate changes and/or to increasing land use since c. 2700 cal. yr BP. For example, significant land use under rather stable climate conditions during the Roman Empire may be responsible for large flood deposits in the northern part of Lake Le Bourget between AD 966 and 1093. However, during the Little Ice Age (LIA), well-documented major environmental changes in the catchment area essentially resulted from climate change and formed basin-wide major flood deposits in Lake Le Bourget. Up to five 'LIA-like' Holocene cold periods developing enhanced Rhone River flooding activity in Lake Le Bourget are documented at c. 7200, 5200, 2800, 1600 and 200 cal. yr BP. These abrupt climate changes were associated in the NW Alps with Mont Blanc glacier advances, enhanced glaciofluvial regimes and high lake levels. Correlations with European lake level fluctuations and winter precipitation regimes inferred from glacier fluctuations in western Norway suggest that these five Holocene cooling events at 45°N were associated with enhanced westerlies, possibly resulting from a persistent negative mode of the North Atlantic Oscillation.     

New palaeontological data from the organic-rich layers of the Bathonian of the Grands Causses (France)

The palaeontological content (charophytes and vertebrates) of organic-rich layers from the Middle Jurassic (Bathonian) of the Grands Causses at Mostuéjouls (Aveyron, France) has been examined. It is rich in gyrogonites of Porochara douzensis. The vertebrates of the lower layer include a single hybodontiform tooth, “semionotiform” teeth and scales, and one pycnodontiform tooth whereas the upper layer has yielded one hybodontiform tooth, a variety of actinopterygian remains (mostly Caturus sp. and indeterminate pycnodontiforms) and a few possible reptile remains. The variation in fauna between the two layers is ascribed to a different degree of marine influence.     

Anhydrite–gypsum transition in the argillites of flooded salt workings in eastern France

This study aims at understanding the physico-chemical interactions between the saturated brine and the rocks enclosing the underground salt workings in Lorraine (eastern France). These anhydrite-rich and argillaceous rocks were characterized in terms of mineralogy, micro-texture and connected porosity. Then, the two main lithofacies, massive anhydrite and anhydrite-rich argillite, were immersed in brine during more than 1 year. During this batch experiment, the argillites were affected by macroscopic splitting, contrarily to the massive anhydrite. Micro-texture and brine chemical analyses clearly show the swelling due to the hydration of anhydrite into gypsum inside the argillites, whereas hydration occurs superficially on the massive anhydrite, due to its very low permeability. Anhydrite–gypsum transformation is promoted by the presence of dissolved strontium and potassium in saturated brine. The low activity of water in saturated brine does not allow the clay fraction to swell significantly during the experiment. Thus, the expansion resulting from the hydration of anhydrite into gypsum might be responsible of the splitting of argillite in a saturated brine environment. The superficial anhydrite hydration on massive anhydrite can be explained by the low amount of connected porosity (less than 1%).     

Stochastic forecasts of seawater intrusion towards sustainable groundwater management: application to the Korba aquifer (Tunisia)

A stochastic study of long-term forecasts of seawater intrusion with an application to the Korba aquifer (Tunisia) is presented. Firstly, a geostatistical model of the exploitation rates was constructed, based on a multi-linear regression model combining incomplete direct data and exhaustive secondary information. Then, a new method was designed and used to construct a geostatistical model of the hydraulic conductivity field by combining lithological information and data from hydraulic tests. Secondly, the effects of the uncertainties associated with the pumping rates and the hydraulic conductivity field on the 3D density-dependent transient model were analysed separately and then jointly. The forecasts of the impacts of two different management scenarios on seawater intrusion in the year 2048 were performed by means of Monte Carlo simulations, accounting for uncertainties in the input parameters as well as possible changes of the boundary conditions. Combining primary and secondary data allowed maps of pumping rates and the hydraulic conductivity field to be constructed, despite a lack of direct data. The results of the stochastic long-term forecasts showed that, most probably, the Korba aquifer will be subject to important losses in terms of regional groundwater resources.     

Projecting future drought in Mediterranean forests: bias correction of climate models matters!

Global and regional climate models (GCM and RCM) are generally biased and cannot be used as forcing variables in ecological impact models without some form of prior bias correction. In this study, we investigated the influence of the bias correction method on drought projections in Mediterranean forests in southern France for the end of the twenty-first century (2071–2100). We used a water balance model with two different atmospheric climate forcings built from the same RCM simulations but using two different correction methods (quantile mapping or anomaly method). Drought, defined here as periods when vegetation functioning is affected by water deficit, was described in terms of intensity, duration and timing. Our results showed that the choice of the bias correction method had little effects on temperature and global radiation projections. However, although both methods led to similar predictions of precipitation amount, they induced strong differences in their temporal distribution, especially during summer. These differences were amplified when the climatic data were used to force the water balance model. On average, the choice of bias correction leads to 45 % uncertainty in the predicted anomalies in drought intensity along with discrepancies in the spatial pattern of the predicted changes and changes in the year-to-year variability in drought characteristics. We conclude that the choice of a bias correction method might have a significant impact on the projections of forest response to climate change.     

Effects of different crystal faces on the surface charge of colloidal goethite (α-FeOOH) particles: an experimental and modeling study

The surface charge of colloidal particles is usually determined by potentiometric titration. These acid-base titrations make it possible to measure the pH of point-of-zero charge (pzc) for oxide minerals. This macroscopic property is the most important parameter used in surface complexation modeling to reproduce experimental data. The pzc values of goethite reported in the literature vary between 7.0 and 9.5. Carbonate adsorption and/or surface morphology are thought to account for this wide range.We demonstrate a procedure for the removal of the carbonate ions that initially adsorb on goethite and strongly affect the titration curves and pzc determination. We also investigated the crystal-face-specific reactivity of two morphologically different goethites. The z-profiles obtained from atomic force microscopy (AFM) images showed that the goethite with the smallest specific surface area (S = 49 m²/g, denoted G49) exhibits 70% of the (001) face, whereas this value is only 30% for the goethite with largest specific surface area (S = 95 m²/g, denoted G95). This morphologic difference results in slightly different pzc values: 9.0 for G49 goethite and 9.1 for G95 geothite. These experimental pzc values have been correlated with multisite complexation calculations using both the full-site and the 1-pK approaches. We used the full-site approach to consider all of the configurations of hydrogen bond interactions with surface site. The resulting mean charges gave estimated pzc values of 8.9 and 9.2 for the (001) and (101) faces, respectively. Considering these theoretical pzc values for individual faces and the face distributions obtained from AFM analysis, the calculated pzc values are in full agreement with the experimental pzc values. However, this morphologic difference is more expressed in surface charge values than in the pzc values. Indeed, the surface charge of G49 goethite is much higher than that of G95 goethite, and the 1-pK calculations make it possible to fit the titration data satisfactorily.     

Numerical resolution of well-balanced shallow water equations with complex source terms

This paper presents a well-balanced numerical scheme for simulating frictional shallow flows over complex domains involving wetting and drying. The proposed scheme solves, in a finite volume Godunov-type framework, a set of pre-balanced shallow water equations derived by considering pressure balancing. Non-negative reconstruction of Riemann states and compatible discretization of slope source term produce stable and well-balanced solutions to shallow flow hydrodynamics over complex topography. The friction source term is discretized using a splitting implicit scheme. Limiting value of the friction force is derived to ensure stability. This new numerical scheme is validated against four theoretical benchmark tests and then applied to reproduce a laboratory dam break over a domain with irregular bed profile.