海拉尔盆地贝尔凹陷兴安岭群储层粘土矿物组成及成因研究

油田注水开发是保持地层能量,提高采收率的有效手段.海拉尔地区由于粘土矿物含量高,在开发过程中储层遇水易泥化、坍塌,严重影响油气的有效开采.通过X射线衍射、偏光显微镜观察和扫描电镜分析,确定了海拉尔盆地贝16断块兴安岭群储层自上而下存在三种粘土矿物组合:蒙脱石 高岭石 (绿泥石)→高岭石 伊/蒙间层 伊利石 (绿泥石)→伊利石 绿泥石 绿/蒙间层 伊/蒙间层.粘土总量在9.1%～69.1%之间,由地层浅部到深部呈现由高到低的变化规律.详细研究了水敏性极强的钠蒙脱石及其间层矿物,认为凝灰物质的水解蚀变以及长石和中、酸性岩屑在成岩过程中的次生变化是造成海拉尔地区粘土含量高的主要因素.     

岩石破坏前后曲线分类及脆-延转换围压研究——蚀变岩常规三轴压缩试验Ⅰ

蚀变岩是工程中少见的软弱岩类,在西南某重大水电工程中,蚀变岩处于工程的重要部位,为保证工程的长期稳定性,对蚀变岩力学特性进行了深入全面的试验研究.通过对孔隙度不同的饱水蚀变岩进行系统的常规三轴压缩试验和总结分析,提出了蚀变岩三轴压缩下破坏前应力.应变曲线可分为3大类,破坏后应力-应变曲线亦可分为3大类的形态模式.并得出结论:蚀变岩的破坏类型受围压与孔隙度的共同影响,在给定的12 MPa围压下蚀变岩以脆性破坏为主,只有孔隙度大于16%且围压大于4 MPa时才有可能进入脆-延转换状态,且脆-延转换围压随孔隙度增加而降低,临界状态应力比随孔隙度增大而增加.     

一种新的波浪变形三维数值模式──0-1混合型边界元

为提高边界元法模拟三维波场波浪变形的数值计算精度,借鉴常数元和线性元剖分方式、波势函数及波势函数法向导数对单元节点设定的各自适应性,提出了一种新的单元剖分模式──0-1混合型边界元,以控制和减缓由于计算误差累计而造成的波浪数值计算上的“横向振动”,借此结合边界元法的分区模式可实现较大范围的波场线性波浪变形计算,并为时域内的波浪非线性变形计算提供时间步长的数值保证.     

The wave transformation and breaking phenomena in shallow water

Ｔｈｅｗａｖｅｔｒａｎｓｆｏｒｍａｔｉｏｎａｎｄｂｒｅａｋｉｎｇｐｈｅｎｏｍｅｎａｉｎｓｈａｌｌｏｗｗａｔｅｒ￥ＬｉＹｕｃｈｅｎｇ（１．ＤａｌｉａｎＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｄａｌｉａｎ１１６０２３，Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：...     

腹泻性贝毒的高效液相色谱法测定条件改进及其运用

对腹泻性贝毒的高效液相色谱测定方法的条件进行改变，使原来对实验条件要求苛刻的方法更适宜于一般的实验室使用，使其有可能替代国内目前常用的小鼠生物方法。井成功地运用于冬季大连海域贝类腹泻性贝毒的检测，首次报道了大连地区海域贝类腹泻性贝毒的主要成分大田软海绵酸的含量，其结果是2000年1—3月大连地区海域贝类腹泻性贝毒除个别海区外一般都末检出。     

浙江西沪港重金属铜的配位容量和形态分析

根据2000年6月10～14日在浙江省西沪港采集的海水样品,利用AA-800石墨炉原子吸收分光光度技术和阳极溶出伏安法测定样品中重金属铜的含量,获得铜在海水中受不同的有机配体控制.不同粒级的铜表观配位容量表明西沪港海水过孔径1.00μm微孔膜的(ACuCC)较高,为144.4nmol/dm3;过0.40和0.20μm滤膜的(ACuCC)分别为103.0和102nmol/dm3;铜的有机配体条件稳定常数的对数值在7.25～9.14之间.铜的总量为21.72nmol/dm3.铜全部为稳定溶解态,其中pH2酸溶态占95.0%,强有机结合态占5.0%.溶解态铜中有机结合态占过滤海水中总铜的61.6%.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.