Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.     

Constraints on the flux of meteoritic and cometary water on the Moon from volatile element (N–Ar) analyses of single lunar soil grains,Luna 24 core

We report new nitrogen and argon isotope and abundance results for single breccia clasts and agglutinates from four different sections of the Luna 24 drill core in order to re-evaluate the provenance of N trapped in lunar regolith, and to place limits on the flux of planetary material to the Moon’s surface. Single Luna 24 grains with ⁴⁰Ar/³⁶Ar ratios <1 show δ¹⁵N values between ?54.5‰ and +123.3‰ relative to terrestrial atmosphere. Thus, low-antiquity lunar soils record both positive and negative δ¹⁵N signatures, and the secular increase of the δ¹⁵N value previously postulated by Kerridge (Kerridge, J.F. [1975]. Science 188(4184), 162–164. doi:10.1126/science.188.4184.162) is no longer apparent when the Luna and Apollo data are combined. Instead, the N isotope signatures, corrected for cosmogenic ¹⁵N, are consistent with binary mixing between isotopically light solar wind (SW) N and a planetary N component with a δ¹⁵N value of +100‰ to +160‰. The lower δ¹⁵N values of Luna 24 grains compared to Apollo samples reflect a higher relative proportion of solar N, resulting from the higher SW fluence in the region of Mare Crisium compared to the central near side of the Moon. Carbonaceous chondrite-like micro-impactors match well the required isotope characteristics of the non-solar N component trapped in low-antiquity lunar regolith. In contrast, a possible cometary contribution to the non-solar N flux is constrained to be ?3–13%. Based on the mixing ratio of SW to planetary N obtained for recently exposed lunar soils, we estimate the flux of micro-impactors to be (2.2–5.7) × 10³ tons yr^?1 at the surface of the Moon. Our estimate for Luna 24 agrees well with that for young Apollo regolith, indicating that the supply of planetary material does not depend on lunar location. Thus, the continuous influx of water-bearing cosmic dust may have represented an important source of water for the lunar surface over the past ～1 Ga, provided that water removal rates (i.e., by meteorite impacts, photodissociation, and sputtering) do not exceed accumulation rates.     

Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.     

Geology and petroleum potential of the Fairway Basin in the Tasman Sea

The Fairway Basin is a large, generally north – south-trending, sediment-filled structure in water 1500 – 3000 m deep, on the eastern slope of the Lord Howe Rise in the Tasman Sea, and is partly within Australian jurisdiction. It was poorly known until a few years ago, when seismic profiling and piston coring cruises were carried out. The basin, about 1100 km long and 120 – 200 km wide, can be divided into three segments—north, central and south—that trend northwest, north and north-northwest, respectively. All three segments probably formed by thinning of continental crust during breakup of Lord Howe Rise and surrounding aseismic continental ridges in the Late Cretaceous and Paleocene. Normal faulting, large inputs of terrigenous sediment and subsidence to bathyal marine depths occurred during that time. A period of compression, perhaps related to overthrusting on New Caledonia, occurred in the Eocene, leading to uplift (and in parts, erosion) of northern Lord Howe Rise, and reversal of faulting in the basin. By the Oligocene, the area was again in bathyal depths, and pelagic ooze and some turbidites accumulated. The basinal sequence is generally 2000 – 4000 m thick, with 1200 – 3200 m of Cretaceous to Eocene sediment concentrated in depocentres, capped by 500 – 800 m of Oligocene and younger sediment. In the depocentres, numerous sedimentary diapirs pierce sedimentary sequences. The sedimentary diapirs appear to be fed by Cretaceous muds deposited during rifting. Often, these diapirs are overlain by faults extending to the seafloor, and hummocky bathymetry is possibly caused by fluid escape. The overall geology suggests that the Fairway Basin may be a large frontier hydrocarbon province. Seismic profiles display a bottom-simulating reflector above many depocentres, 500 – 700 m below the seafloor. The bottom-simulating reflector has positive polarity, which could result from a diagenetic phase transformation, a thin gas hydrate layer with a sharp top, or from the sharp base of a gas layer (probably beneath gas hydrates). Standard piston cores taken above diapirs and apparent fluid-escape features have recovered little gas. Other than drilling, the next steps in assessing petroleum potential are to clearly document fluid-escape structures, and to sample any fluids emitted for hydrocarbons.     

Local amplification of deep mining induced vibrations Part 1: Experimental evidence for site effects in a coal basin

The work presented in this paper lies under the scope of a research program aiming to assess the impact of deep coal mining induced vibrations on the surface constructions. The concerned section of the program is dedicated to the study of geological site effects and their influence on the mining induced vibrations for which the experimental investigations have been carried out and developed in this paper (Part 1). The empirical methods based on H/V spectral ratios have been applied on data sets provided from mining induced vibrations recorded within private residences above the deep coalmine as well as complementary measurements of ambient noise. The results evidence an amplified zone in the southern part of the Gardanne basin where drilling data confirmed the presence of particularly fractured and soft stratigraphic units. This joint analysis of induced seismicity and ambient noise enabled to validate the method based on H/V ratios applied to the mining context.     

Chemical composition of Russian Arctic precipitation in 2007-2015

The results of observations of the chemical composition of precipitation in the Russian Arctic in 2007-2015 are summarized including the data from NP-35 drifting ice station obtained in 2007-2008 in the framework of the joint program of Arctic and Antarctic Research Institute and Voeikov Main Geophysical Observatory. The qualitative and quantitative difference in the chemical composition of precipitation in the Atlantic, Siberian, and Pacific sectors of the Russian Arctic is revealed. It is found that the concentration of microelements (heavy metals) in precipitation at NP-35 ice station did not exceed 12% of total ions at the lowest mineralization. The comparative analysis is presented of the concentration of sulfate ions in precipitation in Norilsk and at NP-35 ice stations.     

The temple of apollo (Delphi) strengthens novel thermoluminescence dating method

The temple of Apollo in Delphi (Greece), built in 550 B.C., has been used to reconfirm a novel method of dating carved megalithic stone buildings using thermoluminescence (TL) (Liritzis, 1994). A calcitic (marble) sample was taken from the western side of the well-known inscribed polygonal wall, which constitutes the southern external support foundations of the temple. A partially bleached TL methodology was devised to determine first the ancient residual TL and then the correct archaeological dose. The obtained TL age of 420 ± 300 B.C. is compatible, within the margin of error, with the archaeological age. © 1997 John Wiley & Sons, Inc.     

THE MULTIPLICITY PRINCIPLE IN MODERN REMOTE SENSING METHODS AND ITS APPLICATION TO AGRICULTURAL IMAGE INTERPRETATION

The authors elaborate upon the “multiplicity principle” in remote sensing, i.e., the need for repeated imaging at a variety of scales, spatial resolutions, spectral bands, and times of imaging in order to attain the maximum information possible. They then explore the ways it can be applied in agricultural research, through two different image comparison and interpretation strategies. A detailed example is presented of the use of a multitemporal imaging strategy for the recognition of several agricultural crops from false color composite imagery. Translated by Edward Torrey, Alexandria, VA 22308 from: G. V. Dobrovol'skiy and V. L. Andronikov, eds., Aerokosmicheskiye metody v pochvo-vedenii i ikh ispol'zovaniye v sel'skom khozyaystve: sbornik nauchnykh trudov [Remote Sensing Methods in Soil Science and Their Utilization in Agriculture: A Collection of Scientific Works]. Moscow: Nauka, 1990, pp. 47-55.     

Quantification of the environmental structural risk with spoiling ties: is randomization worthwhile?

Many recent works show that copulas turn out to be useful in a variety of different applications, especially in environmental sciences. Here the variables of interest are usually continuous, being times, lengths, weights, and so on. Unfortunately, the corresponding observations may suffer from (instrumental) adjustments and truncations, and eventually may show several repeated values (i.e., ties). In turn, on the one hand, a tricky issue of identifiability of the model arises, and, on the other hand, the assessment of the risk may be adversely affected. A possible remedy is to adopt suitable randomization procedures: here three different strategies are outlined. The goal of the work is to carry out a simulation study in order to evaluate the effects of the randomization of multivariate observations when ties are present. In particular, it is investigated whether, how, and to what extent, the randomization may change the estimation of the structural risk: for this purpose, a coastal engineering example will be used, as archetypical of a broad class of models and problems in engineering applications. Practical advices and warnings about the use of randomization techniques are hence given.