Numerical solution and convergence analysis of steam injection in heavy oil reservoirs

In this paper, the numerical methods for solving the problem of steam injection in the heavy oil reservoirs are presented. We consider a 3-dimensional model of 3-phase flow, oil, water, and steam, with the effect of 3-phase relative permeability. Interphase mass transfer of water and steam is considered; oil is assumed nonvolatile. We apply the simultaneous solution approach to solve the corresponding nonlinear discretized partial differential equation in the fully implicit form. The convergence of finite difference scheme is proved by the Rosinger theorem. The heuristic Jacobian-Free-Newton-Krylov (HJFNK) method is proposed for solving the system of algebraic equations. The result of this proposed numerical method is well compared with some experimental results. Our numerical results show that the first iteration of the full approximation scheme (FAS) provides a good initial guess for the Newton method. Therefore, we propose a new hybrid-FAS-HJFNK method while there is no steam in the reservoir. The numerical results show that the hybrid-FAS-HJFNK method converges faster than the HJFNK method.     

Crustal melting and recycling: geochronology and sources of Variscan syn-kinematic anatectic granitoids of the Tormes Dome (Central Iberian Zone). A U–Pb LA-ICP-MS study

International Journal of Earth Sciences - In this study, we report U–Pb Laser Ablation ICP-MS zircon and ID-TIMS monazite ages for peraluminous granitoid plutons...     

Hydrogeology of a montane headwater groundwater system downgradient of a coal-mine waste rock dump: Elk Valley,British Columbia,Canada

Steelmaking-coal waste rock placed in mountain catchments in the Elk Valley, British Columbia, Canada, drain constituents of interest (CIs) to surface water downgradient of the waste rock dumps. The role of groundwater in transporting CIs in the headwaters of mountain catchments is not well understood. This study characterizes the physical hydrogeology of a portion of a 10-km² headwater catchment (West Line Creek) downgradient of a 2.7-km² waste rock dump placed over a natural headwater valley-bottom groundwater system. The study site was instrumented with 13 monitoring wells. Drill core samples were collected to determine subsurface lithology and geotechnical properties. The groundwater system was characterized using field testing and water-level monitoring. The valley-bottom sediments were composed of unconsolidated glacial and meltwater successions (<64 m thick) deposited as a series of cut and fill structures overlying shale bedrock. An unconfined basal alluvial aquifer located above fractured bedrock was identified as the primary conduit for groundwater flow toward Line Creek (650 m from the toe of the dump). Discharge through the basal alluvial aquifer was estimated using the geometric mean hydraulic conductivity (±1 standard deviation). These calculations suggest groundwater discharge could account for approximately 15% (ranging from 2 to 60%) of the total water discharged from the watershed. The residence time from the base of the waste rock dump to Line Creek was estimated at <3 years. The groundwater system was defined as a snowmelt (i.e., nival) regime dominated by direct recharge (percolation of precipitation) across the catchment.     

Do Macroalgal Mats Impact Microphytobenthos on Mudflats? Evidence from a Meta-Analysis,Comparative Survey,and Large-Scale Manipulation

Eutrophication and species introductions have resulted in increased macroalgal biomass in coastal ecosystems around the globe. Macroalgal mats may compete with microphytobenthos (MPB) for light and nutrients and, due to their position in the canopy, have a negative impact on MPB biomass. We tested this effect by conducting a meta-analysis of prior experiments, as well as a comparative survey, and a macroalgal-removal manipulation in the coastal lagoons of the Virginia Coastal Reserve (VCR) on the eastern shore of Virginia (USA). In all cases, MPB biomass was estimated using benthic chlorophyll as a proxy. While prior individual studies documented impacts of macroalgae, when effect sizes were averaged across studies, there was no consistent effect of macroalgal biomass on MPB biomass. In the VCR, a non-native red macroalga, Gracilaria vermiculophylla, dominates intertidal mats and attains high biomasses at some sites. Nevertheless, MPB biomass was unrelated to macroalgal mass based on a survey of mudflats. Further, when macroalgae were experimentally manipulated on a mudflat using a before and after impact design, there was no change in MPB. Based on the meta-analysis, survey, and manipulation we conducted, macroalgal mats do not have a generalizable effect on MPB, interactions seem context-dependent, and in the VCR, the effects on MPB appear neutral. This finding is important given the significance of MPB in supporting food webs and other estuarine ecosystem functions, as well as the increasing frequency and intensity of macroalgal blooms.     

Anaerobic digestion of residual liquid effluent (brown juice) from a green biorefinery

This work studied the anaerobic digestion of brown juice, a liquid residual stream generated from biomass fractionation in a green biorefinery. Biomethane potential batch tests and inhibition studies of brown juice were performed during continuous processing in an upflow anaerobic sludge blanket reactor. Prolongation of the lag phase in the batch tests with increasing substrate/inoculum ratio suggested initial inhibition, which was, however, overcome by adaptation. This was indicated by high final methane yields, which were close to the theoretical maximum of up to 500 L-CH₄ kg-VS^?1, achieved after 15 days for most of the set-ups. Reactor operation at the organic loading rate of 13.9 g-COD L^?1 day^?1 and hydraulic retention time of 3 days revealed methane yields of 202 L-CH₄ kg-COD^?1 (307 L-CH₄ kg-VS^?1). Particle size analysis of the granules used in the reactor showed disintegration of the larger granules.     

A novel continuous magnetic nano-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/perlite fixed bed reactor for catalytic wet peroxide oxidation of dyes: reactor structure

In the present work, a continuous catalytic wet peroxide oxidation fixed bed reactor was employed to treat a simulated wastewater sample with malachite green dye, as a contaminant. Natural perlite particle-supported nano-Fe₃O₄ catalyst was used as a fixed bed inside a reactor, and it was immobilized by a persistent magnetic field. The range of (perlite) particle sizes was from 100 to 1000 nm. The effects of various operating parameters, including temperature of the reactor, pH, initial hydrogen peroxide concentration and initial dye concentration, were investigated on the percentage removal of malachite green dye. Load of catalyst of 2 g and volumetric flow rate of 1 L/h were selected for all the tests. Maximum malachite green degradation was 99.5 ± 0.3%. This removal percentage was attained at temperature of 80 °C, pH = 6, initial dye concentration of 6 mg/L and initial hydrogen peroxide concentration of 100 mg/L. The process was isotherm, and the catalyst showed high catalytic activity in the steady-state condition. The loss of catalyst was less than 0.3%.     

Photodegradation of dimethyl phthalate (DMP) by UV–TiO<Subscript>2</Subscript> in aqueous solution: operational parameters and kinetic analysis

In this paper, the adsorption and degradation phenomenon involved in the photocatalytic degradation of dimethyl phthalates (DMPs) by titanium dioxide (TiO₂) was studied. A variety of operating variables were selected firstly. Then, it was proved that even for such weak adsorption properties molecules as DMP, adsorption was still an important prerequisite for photolysis. A surface-mediated reaction process was proposed that the photodegradation of DMP assisted by TiO₂ particles occurred primarily at the surface of the photocatalyst rather than in the homogeneous phase. According to Langmuir–Hinshelwood model, the adsorption constant determined from the dark adsorption was far less than that obtained in the light condition. Enhanced DMP adsorption on the surface of TiO₂ under irradiation was the possible reason for the improvement of photodegradation efficiency. Under the irradiation of light, a synergistic mechanism of adsorption and photocatalysis was responsible for DMP degradation. The quantitative analysis by adding scavengers indicated that ^·OH radical was primarily responsible for the photodegradation of DMP. It was further verified that ^·OH was produced much more from conduction band electrons rather than valance band holes toward photodegradation of DMP by adding foreign Cu²⁺.     

Isolation of <Emphasis Type="Italic">Bacillus cereus</Emphasis> from botanical soil and subsequent biodegradation of waste engine oil

Waste engine oil causes a vital environmental pollution when it spill during change and transportation and products of waste engine oil causes lethal effects to the living systems. Thus, abiotic and biotic approaches are being extensively used for removal of waste engine oil pollution. Therefore in present study, waste engine oil degradation was accomplished by a new bacterial culture, isolated from the soil by an enrichment technique. Morphological, biochemical and gene sequence analysis revealed that isolate was Bacillus cereus. Subsequently, biodegradation potential of B. cereus for waste engine oil was studied. Experimental variables, such as pH, substrate concentration, inoculum size, temperature and time on the biodegradation, were checked in mineral salt medium. The biodegradation efficiency of B. cereus was determined by gravimetry, UV–visible spectrophotometry and gas chromatography. In addition, waste engine oil was also characterized by GC–MS and FTIR for its major constituents, which showed total 38 components in waste engine oil, including hopanes, benzopyrene, long-chain aliphatic hydrocarbons, dibenzothiophenes, biphenyl and their derivatives. Results of successive biodegradation indicated that B. cereus was capable to degrade 1% of waste engine oil with 98.6% degradation potential at pH 7 within 20 days. Hence, B. cereus presents an innovative tool for removing the engine oil from the contaminated area.     

Bioerosion and encrustation rates in recent mollusk death assemblages on a supratidal siliciclastic setting,Playa Norte,Veracruz State,Mexico

This study presents both qualitative and quantitative data regarding marine mollusk (gastropods and bivalves) shell bioerosion and encrustation based on death assemblages obtained from a recent supratidal environment in Playa Norte, Veracruz State. The objectives of this study were to assess the nature of bioerosion and encrustation processes and to investigate the role of these taphonomic features contributing to the deterioration of natural shell accumulations within a tropical siliciclastic tidal environment. The assemblage comprises 31 species: 13 gastropods and 18 bivalves. The bioerosion and encrustation degrees were low to moderate for both types. The most abundant traces were predatory gastropod structures (Oichnus paraboloides and O. simplex), whereas sponge borings (Entobia isp.), polychaete dwellings (Caulostrepsis taeniola), and echinoid raspings (Gnatichnus isp.) were less frequent. The encrusting organisms include polychaete serpulids, bryozoans, and rare foraminifers (Homotrema rubrum). Because of the low bioerosion and encrustation degrees occurring in this area, accumulation is expected to predominate over biotic destruction. As deposition conditions (richly fossiliferous carbonate sandstone beds) were similar to those prevailing in the Tuxpan Formation during the Miocene (Langhian), it is suggested that this study provides an equivalent reference to interpret mollusk fossil assemblages located in this site.