Thermodynamic modelling of the reaction muscovite+cordierite→Al2SiO5+biotite+quartz+ H2O: constraints from natural assemblages and implications for the metapelitic petrogenetic grid

The reaction muscovite+cordierite→biotite+Al₂SiO₅ +quartz+H₂O is of considerable importance in the low pressure metamorphism of pelitic rocks: (1) its operation is implied in the widespread assemblage Ms + Crd +And± Sil + Bt + Qtz, a common mineral assemblage in contact aureoles and low pressure regional terranes; (2) it is potentially an important equilibrium for pressure estimation in low pressure assemblages lacking garnet; and (3) it has been used to distinguish between clockwise and anticlockwise P–T paths in low pressure metamorphic settings. Experiments and thermodynamic databases provide conflicting constraints on the slope and position of the reaction, with most thermodynamic databases predicting a positive slope for the reaction. Evidence from mineral assemblages and microtextures from a large number of natural prograde sequences, in particular contact aureoles, is most consistent with a negative slope (andalusite and/or sillimanite occurs upgrade of, and may show evidence for replacement of, cordierite). Mineral compositional trends as a function of grade are variable but taken as a whole are more consistent with a negative slope than a positive slope. Thermodynamic modelling of reaction 1 and associated equilibria results in a low pressure metapelitic petrogenetic grid in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH) which satisfies most of the natural and experimental constraints. Contouring of the Fe–Mg divariant interval represented by reaction 1 allows for pressure estimation in garnet‐absent andalusite+cordierite‐bearing schists and hornfelses. The revised topology of reaction 1 allows for improved analysis of P–T paths from mineral assemblage sequences and microtextures in the same rocks.     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.     

The duration of near‐peak metamorphism from diffusion modelling of garnet zoning

Garnet in a staurolite–kyanite zone sample from central Vermont displays a bell‐shaped Mn growth zoning with diffusional modification over the outer 100 μm. The diffusion is driven by the prograde net transfer reaction garnet + chlorite = kyanite + biotite as is evidenced by a well‐defined resorption zone on the rim. Analysis of the reaction history and resorbed garnet composition suggests that the peak temperature attained was 620–660 °C. Diffusional modelling of the rim diffusion provides an estimate of the duration of the metamorphic episode over which significant garnet diffusion occurs. The duration is a function of the assumed peak temperature and garnet diffusivities and range from a few hundred thousand years to a few million years. Such short durations require rapid tectonic burial and exhumation of relatively thin tectonic slices.     

Evaluating post-wildfire logging-slash cover treatment to reduce hillslope erosion after salvage logging using ground measurements and remote sensing

Continuing long and extensive wildfire seasons in the Western US emphasize the need for better understanding of wildfire impacts including post-fire management scenarios. Advancements in our understanding of post-fire hillslope erosion and watershed response such as flooding, sediment yield, and debris flows have recently received considerable attention. The potential impacts of removing dead trees, called salvage logging, has been studied, however the use of remotely sensed imagery after salvage logging to evaluate spatial patterns and recovery is novel. The 2015 North Star Fire provided an opportunity to evaluate hillslope erosion reduction using two field experiments and coincidental remotely sensed imagery over 3 years. Simulated rill experiments with four flow rates were used to quantify hillslope erosion on skidder trails with and without added logging slash compared with a burned-only control. Seven replicated hillslope silt fence plots with the same treatments were also evaluated for natural rainfall events. WorldView-2 satellite imagery was used to relate ground cover and erodible bare soil between the two experiments using multi-temporal Normalized Differenced Vegetation Index (NDVI) values. Results indicate that the skid trails produced significantly more sediment (0.70 g s⁻¹) than either the slash treated skid trail (0.34 g s⁻¹) or controls (0.04 g s⁻¹) with the simulated rill experiment. Similarly, under natural rainfall conditions sediment yield from hillslope silt fence plots was significantly greater for the skid trail (3.42 Mg ha⁻¹) than either the slash treated skid trail (0.18 Mg ha⁻¹) or controls (0 Mg ha⁻¹). An NDVI value of 0.32 on all plots over all years corresponded to a ground cover of about 60% which is an established threshold for erosion reduction. Significant relationships between NDVI, ground cover, and sediment values suggest that NDVI may help managers evaluate ground cover and erosion potential remotely after disturbances such as a wildfire or salvage logging.     

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.     

Are cultural heritage and resources threatened by climate change? A systematic literature review

Climate change poses serious threats to the protection and preservation of cultural heritage and resources. Despite a high level of scholarly interest in climate change impacts on natural and socio-economic systems, a comprehensive understanding of the impacts of climate change on cultural heritage and resources across various continents and disciplines is noticeably absent from the literature. To address this gap, we conducted a systematic literature review methodology to identify and characterize the state of knowledge and how the cultural heritage and resources at risk from climate change are being explored globally. Results from 124 reviewed publications show that scholarly interest in the topic is increasing, employs a wide range of research methods, and represents diverse natural and social science disciplines. Despite such increasing and diverse interest in climate change and cultural heritage and resources, the geographic scope of research is limited (predominantly European focused). Additionally, we identified the need for future studies that not only focuses on efficient, sustainable adaptation planning options but also documents if, and how, the implementation of cultural heritage and resources adaptation or preservation is taking place. This systematic literature review can help direct scholarly research in climate change and cultural heritage and resource area. Ultimately, we hope these new directions can influence policy-making for preservation and adaptation of cultural heritage and cultural resources globally.     

The clustered nucleation and growth processes of garnet in regional metamorphic rocks from north-west Connecticut,USA

Serial sectioning and imaging with a flatbed scanner yielded the three-dimensional size and spatial distribution of garnet porphyroblasts in two garnet schists and one staurolite-bearing schist from the Everett Formation, north-west Connecticut. The dominant garnet-producing reaction in all samples was chlorite+quartz=garnet+H₂O. The appearance of staurolite, and additional garnet growth in the staurolite-bearing sample, was due to the reaction chloritoid=garnet+staurolite+chlorite. Statistical measures of garnet spatial distributions, using the pair correlation function (PCF), indicate that garnet crystals are weakly to strongly clustered at length scales between 2 and 10 mm. Such clustered nucleation may reflect minor bulk compositional variations. Covariance measures between garnet size and nearest-neighbour distance, using the mark covariance function (MCF), suggest a very weak correlation between crystal size and nearest-neighbour distance for length scales of 2 mm or less. These statistical data suggest that if diffusional gradients were present around growing garnet crystals, they did not influence nucleation and growth patterns at length scales greater than c. 2 mm. Compositional maps, through the garnet centres, show that the smaller crystals have lower Mn core compositions relative to larger crystals, consistent with progressive nucleation during pro-grade metamorphism. Radius-rate plots calculated from compositional X-ray maps show similar growth rates for garnet crystals of different size, consistent with an interface-controlled growth model for garnet. The presence of minor diffusional gradients around growing garnet cannot be entirely dismissed, but the lack of observable reaction rims, the clustered spatial distribution and the radius-rate data are most consistent with an interface-controlled garnet growth model.     

Effects of the improper modeling of viscous damping on the first-mode and higher-mode dominated responses of base-isolated buildings

In many finite element platforms, a classical global damping matrix based on the elastic stiffness of the system (including isolators) is usually developed as part of the solution to the equations of motion of base-isolated buildings. The conducted analytical and numerical investigations illustrate that this approach can lead to the introduction of unintended damping to the first and higher vibration modes and the spurious suppression of the respective structural responses. A similar shortcoming might be observed even when a nonclassical damping model (ie, an assembly of the superstructure and isolation system damping sub-matrices) is used. For example, the use of Rayleigh damping approach to develop the superstructure damping sub-matrix can lead to the undesired addition of damping to the isolated mode arising from the mass-proportional component of the superstructure damping. On the other hand, the improper use of nonclassical stiffness-proportional damping (eg, determining the proportional damping coefficient, β_k , based on the first mode) can result in assigning significant damping to the higher-modes and the unintended mitigation of the higher-mode responses. Results show that a nonclassical stiffness-proportional model in which β_k is determined based on the second modal period of a base-isolated building can reasonably specify the intended damping to the higher modes without imparting undesirable damping to the first mode. The nonclassical stiffness-proportional damping can be introduced to the numerical model through explicit viscous damper elements attached between adjacent floors. In structural analysis software such as SAP2000®, the desired nonclassical damping can be also modeled through specifying damping solely to the superstructure material.     

Acheulean artifact accumulation and early hominin land use,Garden Route Casino Road,Pinnacle Point,South Africa

An Early Stone Age Acheulean lithic assemblage collected along a 1.5‐km transect at the Garden Route Casino near Pinnacle Point, Mossel Bay, South Africa, was examined in order to assess the relative degree to which assemblage variability is impacted by post‐occupational processes and/or terrain. It was found that post‐occupational variables do vary across the study area, and they affect the positions of artifacts to different degrees. Terrain structure was determined to have minimal effect on artifact movement. Three analysis sections were identified as having artifacts that were likely close to their original positions and compositions. Future interpretations of differential land use can now be tempered with considerations of the post‐occupational processes that formed the recovered assemblage. © 2009 Wiley Periodicals, Inc.