Upstream and downstream controls of recent avulsions on the Taquari megafan,Pantanal, south‐western Brazil

Avulsion, the natural relocation of a river, is a key process in the evolution of subaerial fans, river floodplains and deltas. The causes of avulsion are poorly understood, which is partly due to the scarcity of field studies of present avulsions. At present, two avulsions are occurring on the middle and lower Taquari megafan, Pantanal basin, south‐western Brazil. Here we present an analysis of the causes of these avulsions based on field and remote sensing data and show that avulsions on megafans can be controlled by both upstream and downstream processes. The middle fan avulsion (started in 1997–1998) is a result of upstream control: overbank aggradation was caused by the (variable) input of sandy sediment into the system, which caused channel‐belt superelevation and also created an easily erodible subsurface favouring bank retreat, crevassing, and scour of deep floodplain channels. The sandy subsurface in this area is inferred to have been a major factor in the causation of this avulsion under conditions of little gradient advantage. The lower fan avulsion (started c. 1990) results from interplay of upstream and downstream controls, the latter being related to the local base level (the Paraguay River floodplain) at the toe of the fan. Channel and overbank aggradation on the lower fan was influenced by fan sub‐lobe progradation and channel backfilling. Fan sub‐lobe progradation caused a significant gradient advantage of the avulsion channel over the parent channel. Avulsions are commonly supposed to be preferentially triggered by high‐magnitude floods, when there is considerable channel‐belt superelevation. However, both avulsions studied by us were triggered by small to average floods, with modest channel‐belt superelevation. We conclude that flood magnitude and channel‐belt superelevation have been overrated as causes of avulsion, and demonstrate additional causes that influence the growth of crevasses into avulsions. Copyright © 2012 John Wiley & Sons, Ltd.     

Catalogue of large alluvial fans in martian impact craters

We conducted a systematic, global survey using Thermal Emission Imaging System Infrared (THEMIS IR) coverage (∼100 m/pixel) to search for large alluvial fans in impact craters on Mars. Our survey has focused on large fans (apron areas greater than ∼40 km², usually located in craters greater than 20 km in diameter) due to the resolution of the THEMIS images and Mars Orbiter Laser Altimeter (MOLA) coverage. We find that the host craters are found to have a distinctive diameter range from 30-150 km. The fans generally cluster in three geographic areas—southern Margaritifer Terra, southwestern Terra Sabaea, and southwestern Tyrrhena Terra, however several outliers do exist. The alluvial fans do not form in a particular orientation along the crater rim nor are they associated with the location of current high rim topography. Fan area magnitude and variability increase with crater diameter while fan concavity magnitude and variability increase with decreasing crater diameter. Smaller fan aprons in general have higher, more variable concavity. The source of the water forming these fans is uncertain given the challenges of accommodating the global distribution pattern and formation patterns within the craters.     

Steady flow to a well near a stream with a leaky bed

We present an explicit analytic solution for steady, two-dimensional ground water flow to a well near a leaky streambed that penetrates the aquifer partially. Leakage from the stream is approximated as occurring along the centerline of the stream. The problem domain is infinite and pumping on one side of the stream induces flow on the other side. The solution includes the effects of uniform flow in the far field and a sloping hydraulic head in the stream. We use the solution to investigate the interaction between ground water and surface water in the stream, the effects of pumping on the opposite side of the stream, and the effects of the leaky streambed on the capture zone envelope of the well. We develop a relationship between parameters such that the pumping well will not capture water from the stream, or from the opposite side of the stream. When the discharge of the well is large enough to capture water from the stream, the shape of the capture zone envelope depends on flow conditions on the side of the stream opposite the well.     

Soil frost effects on soil water and runoff dynamics along a boreal forest transect: 1. Field investigations

To determine how soil frost changes flowpaths of runoff water along a hillslope, a transect consisting of four soil profiles directed towards a small stream in a mature forest stand was investigated at Svartberget, near Vindeln in northern Sweden. Soil temperature, unfrozen water content, groundwater level and snow depth were investigated along the transect, which started at the riparian peat, and extended 30 m upslope into mineral soils. The two, more organic‐rich profiles closest to the stream had higher water retention and wetter autumn conditions than the sandy mineral soils further upslope. The organic content of the soil influenced the variation in frost along the transect. The first winter (1995–96) had abnormally low snow precipitation, which gave a deep frost down to 40–80 cm, whereas the two following winters had frost depths of 5–20 cm. During winter 1995–96, the two organic profiles close to the stream had a shallower frost depth than the mineral soil profile higher upslope, but a considerably larger amount of frozen water. The fraction of water that did not freeze despite several minus degrees in the soil was 5–7 vol.% in the mineral soil and 10–15 vol.% in the organic soil. From the measurements there were no signs of perched water tables during any of the three snowmelt periods, which would have been strong evidence for changed water flowpaths due to soil frost. When shallow soil layers became saturated during snowmelt, especially in 1997 and 1998, it was because of rising groundwater levels. Several rain on frozen ground events during spring 1996 resulted in little runoff, since most of the rain either froze in the soil or filled up the soil water storage. Copyright © 2001 John Wiley & Sons, Ltd.     

Temporal behavior of manganese and iron in a sandy coastal sediment exposed to water column anoxia

The influence of bottom water anoxia on manganese (Mn), iron (Fe), and sulfur (S) biogeochemistry was examined in defaunated sandy sediment from Kærby Fed, Denmark, under controlled laboratory incubations. The initial narrow peaks and steep gradients in solid Mn(IV) and Fe(III) as well as porewater Mn²⁺ and Fe²⁺ observed in the upper 2–5 cm of the sediment indicate rapid metal reduction-oxidation cycles under oxic conditions in the overlying water. The fe zones were generally displaced about 0.5 cm downward compared with the Mn zones due to differences in reactivity. Mn(IV) was reduced and gradually disappeared first (within 10 d) when the sediment was exposed to anoxia followed by reduction and disappearance of Fe(III) (day 7 to 18). The associated loss of Mn²⁺ to the overlying water was most rapid during the first 15 d, whereas the Fe²⁺ efflux initiated around day 10, and after a few days with modest rates the efflux peaked around day 20. A considerable portion of the total Mn (26%) and Fe (23%) inventory initially present in the sediment was lost by efflux after about 1 mo of anoxia. The ability of the sediment to retain upward diffusion of H₂S gradually disappeared in a temporal pattern closely related to the changes in pool size of the reactive Mn and Fe present. The total metal pool in Kærby Fed sediment prevented H₂S release to the overlying water for at least a month of anoxia. It is speculated that external supplies from the overlying water allows a rapid refuelling of surface Mn and Fe oxides in the field when oxic conditions returns between periods of anoxia.     

A unified formulation for the three-dimensional shallow water equations using orthogonal co-ordinates: theory and application

In this paper, the formulations of the primitive equations for shallow water flow in various horizontal co-ordinate systems and the associated finite difference grid options used in shallow water flow modelling are reviewed. It is observed that horizontal co-ordinate transformations do not affect the chosen co-ordinate system and representation in the vertical, and are the same for the three- and two-dimensional cases. A systematic derivation of the equations in tensor notation is presented, resulting in a unified formulation for the shallow water equations that covers all orthogonal horizontal grid types of practical interest. This includes spherical curvilinear orthogonal co-ordinate systems on the globe. Computational efficiency can be achieved in a single computer code. Furthermore, a single numerical algorithmic code implementation satisfies. All co-ordinate system specific metrics are determined as part of a computer-aided model grid design, which supports all four orthogonal grid types. Existing intuitive grid design and visual interpretation is conserved by appropriate conformal mappings, which conserve spherical orthogonality in planar representation. A spherical curvilinear co-ordinate solution of wind driven steady channel flow applying a strongly distorted grid is shown to give good agreement with a regular spherical co-ordinate model approach and the solution based on a β-plane approximation. Especially designed spherical curvilinear boundary fitted model grids are shown for typhoon surge propagation in the South China Sea and for ocean-driven flows through Malacca Straits. By using spherical curvilinear grids the number of grid points in these single model grid applications is reduced by a factor of 50–100 in comparison with regular spherical grids that have the same horizontal resolution in the area of interest. The spherical curvilinear approach combines the advantages of the various grid approaches, while the overall computational effort remains acceptable for very large model domains.     

The use of the log-normal distribution of individuals among species in monitoring zoobenthos in the northern Baltic archipelago

The log-normal distribution of individuals among species of shallow, brackish water benthos is compared to other, more commonly used methods. This method, the use of which was introduced in marine monitoring in 1979, has not previously been tested on macrobenthos of the northern Baltic Sea. The relevance of other indices are discussed in relation to the log-normal distribution. Based on samples from three localities (soft littoral benthos, soft bottom benthos and sand bottom benthos) it is shown that the log-normal distribution could well be used as an important tool in interpreting benthic data sets from low-saline waters with few macrozoobenthic species. It illustrates natural and anthropogenic changes on the zoobenthic communities more adequately than the other parameters calculated.     

Improving the performance of genetic algorithms for land-use allocation problems

Multi-objective optimization can be used to solve land-use allocation problems involving multiple conflicting objectives. In this paper, we show how genetic algorithms can be improved in order to effectively and efficiently solve multi-objective land-use allocation problems. Our focus lies on improving crossover and mutation operators of the genetic algorithms. We tested a range of different approaches either based on the literature or proposed for the first time. We applied them to a land-use allocation problem in Switzerland including two conflicting objectives: ensuring compact urban development and reducing the loss of agricultural productivity. We compared all approaches by calculating hypervolumes and by analysing the spread of the produced non-dominated fronts. Our results suggest that a combination of different mutation operators, of which at least one includes spatial heuristics, can help to find well-distributed fronts of non-dominated solutions. The tested modified crossover operators did not significantly improve the results. These findings provide a benchmark for multi-objective optimization of land-use allocation problems with promising prospectives for solving complex spatial planning problems.