New pterosaurian remains from the Late Cretaceous (Santonian) of Hungary (Iharkút, Csehbánya Formation)

The Late Cretaceous (Santonian) continental vertebrate locality of Iharkút, western Hungary has provided numerous azhdarchid pterosaur remains including the recently described, Bakonydraco galaczi. Since the first report of these fossils, additional remains have been discovered that improve considerably our knowledge of some aspects of the anatomy of azhdarchid pterosaurs. New cranial material described here indicates an edentulous, non-crested premaxillary rostrum in Bakonydraco similar to that of Quetzalcoatlus and reveals that this rostrum was considerably thinner and more lightly built than the relatively massive, pointed mandibular symphysis. In addition, the contact surface of the upper and lower jaws of Bakonydraco at least in the symphyseal region was more similar to Tapejara wellnhoferi than to other azdarchids: the contact is irregular and the premaxilla does not fit closely the rostral part of the mandible. Among the postcranial material the atlas-axis complex possessing lateral pneumatic foramina is of great importance because it further supports the notion of interspecific variability of vertebral pneumaticity among pterosaurs.     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

An experimental study of lake water-sediment interaction rates

Dissolution rates of sediments obtained from the Oued Cherf reservoir were measured in closed-system batch reactors at 25 °C in fluids sampled concurrently from the same locations as the sediments. The BET surface areas of the sediments ranged from 16 to 45 m²/g and consisted primarily of quartz, calcite, and clay minerals. After a brief initial period, release rates of Si, Mg, Ca, Cl, SO₄, and NO₃ from these sediments are approximately linear with time over the course of the experiments, which lasted from 3 to 5 months. BET surface area normalized Si release rates ranged from 10^–17.4 to 10^–18.4 mol/cm²/s. These release rates match closely Si release rates from quartz and clay minerals determined from laboratory dissolution rates reported in the literature. This coherence suggests that laboratory measured silicate dissolution rates can be used with confidence to predict the dissolution behavior of sediments in natural surface waters.     

Geology of the epithermal Ag–Au Huevos Verdes vein system and San José district, Deseado massif, Patagonia, Argentina

The San José district is located in the northwest part of the Deseado massif and hosts a number of epithermal Ag–Au quartz veins of intermediate sulfidation style, including the Huevos Verdes vein system. Veins are hosted by andesitic rocks of the Bajo Pobre Formation and locally by rhyodacitic pyroclastic rocks of the Chon Aike Formation. New ⁴⁰Ar/³⁹Ar constraints on the age of host rocks and mineralization define Late Jurassic ages of 151.3 ± 0.7 Ma to 144.7 ± 0.1 Ma for volcanic rocks of the Bajo Pobre Formation and of 147.6 ± 1.1 Ma for the Chon Aike Formation. Illite ages of the Huevos Verdes vein system of 140.8 ± 0.2 and 140.5 ± 0.3 Ma are 4 m.y. younger than the volcanic host rock unit. These age dates are among the youngest reported for Jurassic volcanism in the Deseado massif and correlate well with the regional context of magmatic and hydrothermal activity. The Huevos Verdes vein system has a strike length of 2,000 m, with several ore shoots along strike. The vein consists of a pre-ore stage and three main ore stages. Early barren quartz and chalcedony are followed by a mottled quartz stage of coarse saccharoidal quartz with irregular streaks and discontinuous bands of sulfide-rich material. The banded quartz–sulfide stage consists of sulfide-rich bands alternating with bands of quartz and bands of chlorite ± illite. Late-stage sulfide-rich veinlets are associated with kaolinite gangue. Ore minerals are argentite and electrum, together with pyrite, sphalerite, galena, chalcopyrite, minor bornite, covellite, and ruby silver. Wall rock alteration is characterized by narrow (< 3 m) halos of illite and illite/smectite next to veins, grading outward into propylitic alteration. Gangue minerals are dominantly massive quartz intergrown with minor to accessory adularia. Epidote, illite, illite/smectite, and, preferentially at deeper levels, Fe-chlorite gangue indicate near-neutral pH hydrothermal fluids at temperatures of >220°C. Kaolinite occurring with the late sulfide-rich veinlet stage indicates pH < 4 and a temperature of <200°C. The Huevos Verdes system has an overall strike of 325°, dipping on average 65° NE. The orientations of individual ore shoots are controlled by vein strike and intersecting north-northwest-striking faults. We propose a structural model for the time of mineralization of the San José district, consisting of a conjugate shear pair of sinistral north-northwest- and dextral west-northwest-striking faults that correspond to R and R′ in the Riedel shear model and that are related to master faults (M) of north-northeast-strike. Veins of 315° strike can be interpreted as nearly pure extensional fractures (T). Variations in vein strike predict an induced sinistral shear component for strike directions of >315°, whereas strike directions of <315° are predicted with an induced dextral strike–slip movement. The components of the structural model appear to be present on a regional scale and are not restricted to the San José district.     

Origins and evolution of rhyolitic magmas in the central Snake River Plain: insights from coupled high-precision geochronology,oxygen isotope,and hafnium isotope analyses of zircon

We present new high-precision CA-ID-TIMS and in situ U–Pb ages together with Hf and O isotopic analyses (analyses performed all on the same grains) from four tuffs from the 15?10 Ma Bruneau–Jarbidge center of the Snake River Plain and from three rhyolitic units from the Kimberly borehole in the neighboring 10?6 Ma Twin Falls volcanic center. We find significant intrasample diversity in zircon ages (ranges of up to 3 Myr) and in δ¹⁸O (ranges of up to 6‰) and ε_Hf (ranges of up to 24 ε units) values. Zircon rims are also more homogeneous than the associated cores, and we show that zircon rim growth occurs faster than the resolution of in situ dating techniques. CA-ID-TIMS dating of a subset of zircon grains from the Twin Falls samples reveals complex crystallization histories spanning 10⁴–10⁶ years prior to some eruptions, suggesting that magma genesis was characterized by the cyclic remelting of buried volcanic rocks and intrusions associated with previous magmatic episodes. Age-dependent trends in zircon isotopic compositions show that rhyolite production in the Yellowstone hotspot track is driven by the mixing of mantle-derived melts (normal δ¹⁸O and ε_Hf) and a combination of Precambrian basement rock (normal δ¹⁸O and ε_Hf down to ??60) and shallow Mesozoic and Cenozoic age rocks, some of which are hydrothermally altered (to low δ¹⁸O values) by earlier stages of Snake River Plain magmatism. These crustal melts hybridize with juvenile basalts and rhyolites to produce the erupted rhyolites. We also observe that the Precambrian basement rock is only an important component in the erupted magmas in the first eruption at each caldera center, suggesting that the accumulation of new intrusions quickly builds an upper crustal intrusive body which is isolated from the Precambrian basement and evolves towards more isotopically juvenile and lower-δ¹⁸O compositions over time.     

Environmental Monitoring and Peat Assessment Using Multivariate Analysis of Regional-Scale Geochemical Data

A compositional multivariate approach was used to analyse regional-scale soil geochemical data obtained as part of the Tellus Project generated by the Geological Survey of Northern Ireland. The multi-element total concentration data presented comprise X-ray fluorescence (XRF) analyses of 6862 rural soil samples collected at 20-cm depth on a non-aligned grid at one site per \(2\,\hbox {km}^{2}\). Censored data were imputed using published detection limits. Each soil sample site was assigned to the regional geology map, resulting in spatial data for one categorical variable and 35 continuous variables comprised of individual and amalgamated elements. This paper examines the extent to which soil geochemistry reflects the underlying geology or superficial deposits. Since the soil geochemistry is compositional, log-ratios were computed to adequately evaluate the data using multivariate statistical methods. Principal component analysis (PCA) and minimum/maximum autocorrelation factors (MAF) were used to carry out linear discriminant analysis (LDA) as a means to discover and validate processes related to the geologic assemblages coded as age bracket. Peat cover was introduced as an additional category to measure the ability to predict and monitor fragile ecosystems. Overall prediction accuracies for the age bracket categories were 68.4 % using PCA and 74.7 % using MAF. With inclusion of peat, the accuracy for LDA classification decreased to 65.0 and 69.9 %, respectively. The increase in misclassification due to the presence of peat may reflect degradation of peat-covered areas since the creation of superficial deposit classification.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Coupled discrete element and finite volume solution of two classical soil mechanics problems

One dimensional solutions for the classic critical upward seepage gradient/quick condition and the time rate of consolidation problems are obtained using coupled routines for the finite volume method (FVM) and discrete element method (DEM), and the results compared with the analytical solutions. The two phase flow in a system composed of fluid and solid is simulated with the fluid phase modeled by solving the averaged Navier–Stokes equation using the FVM and the solid phase is modeled using the DEM. A framework is described for the coupling of two open source computer codes: YADE-OpenDEM for the discrete element method and OpenFOAM for the computational fluid dynamics. The particle–fluid interaction is quantified using a semi-empirical relationship proposed by Ergun [12]. The two classical verification problems are used to explore issues encountered when using coupled flow DEM codes, namely, the appropriate time step size for both the fluid and mechanical solution processes, the choice of the viscous damping coefficient, and the number of solid particles per finite fluid volume.