Lavras do Sul: A New Equilibrated Ordinary L5 Chondrite from Rio Grande do Sul,Brazil

The new Brazilian chondrite, Lavras do Sul, was found in 1985 at Lavras do Sul, Rio Grande do Sul State-Brazil (33°30′48″S; 53°54′65″W). It consists of a single mass weighing about 1 kg, covered by a black fusion crust with grayish interior. Four polished thin sections were prepared from a slice weighing 67 g on deposit at the Museu Nacional/UFRJ. It consists mostly of chondrules and chondrule fragments dispersed in a recrystallized matrix. Most chondrules are poorly defined and range in size from 300 to 2,000 μm, although some of them show distinct outlines, particularly when viewed under cross-polarized transmitted and reflected light. The texture of chondrules varies from non-porphyritic (e.g., barred-olivine, radial-pyroxene) to porphyritic ones (e.g., granular olivine as well as olivine-pyroxene). The meteorite contains mainly olivine (Fa_24.9), low-Ca pyroxene (Fs_22.6) and metal phases, with minor amounts of plagioclase, chromite and magnetite. Mössbauer Spectroscopy studies indicate that the metal phase is kamacite, tetrataenite and antitaenite. Veins of secondary iddingsite crosscut the thin section and some ferromagnesian silicates. The chemical composition indicates that Lavras do Sul is a member of the low iron L chondrite group. The poorly delineated chondritic texture with few well-defined chondrules, the occurrence of rare clinopyroxene and plagioclase (and maskelynite) with apparent diameters ranging from 5 to 123 μm led us to classify Lavras do Sul as an equilibrated petrologic type 5. The shock features of some minerals suggest a shock stage S3, and the presence of a small amount of secondary minerals such as iddingsite and goethite, a degree of weathering W₁. The meteorite name was approved by the Nomenclature Committee (Nom Com) of the Meteoritical Society (Meteoritic Bulletin Nº99).     

Rigid‐plastic seismic design of reinforced concrete structures

In this paper a new seismic design procedure for Reinforced Concrete (R/C) structures is proposed—the Rigid‐Plastic Seismic Design (RPSD) method. This is a design procedure based on Non‐Linear Time‐ History Analysis (NLTHA) for systems expected to perform in the non‐linear range during a lifetime earthquake event. The theoretical background is the Theory of Plasticity (Rigid‐Plastic Structures). Firstly, a collapse mechanism is chosen and the corresponding stress field is made safe outside the regions where plastic behaviour takes place. It is shown that this allows the determination of the required structural strength with respect to a pre‐defined performance parameter using a rigid‐plastic response spectrum, which is characteristic of the ground motion alone. The maximum strength demand at any point is solely dependent on the intensity of the ground motion, which facilitates the task of distributing required strength throughout the structure. Any artificial considerations intended to adjust results according to empirical observations are avoided, which, from a conceptual point of view, is considered to be an advantage over other simplified design procedures for seismic design. The procedure is formulated using a step‐by‐step format followed by a design example of a 4‐storey‐R/C‐plane‐frame. Results are compared with refined NLTHA and found to be extremely encouraging. Copyright © 2006 John Wiley & Sons, Ltd.     

Monitoring of soil subsidence in urban and coastal areas due to groundwater overexploitation using GPS

The global positioning system (GPS) is widely used for determining the three-dimensional position of points on earth surface. In the last few years, its use has also been increasingly employed for obtaining vertical geometric coordinates, which associated with the orthometrical altitude of the point can be employed in various civil engineering applications, as has been seen in diverse localities throughout the world. The satisfactory performance of this technology for obtaining excellent precision in vertical coordinates demands some conditions, related to the satellites, such as transmission of signals and, principally, in the case of urbanized areas, the presence of obstructions in the proximity of the equipment, which interferes with the quality and quantity of the information collected. GPS is an efficient technique for the detection of small movements, including the monitoring of soil subsidence. The present article describes adequate forms of the use of GPS in such a way as to guarantee good precision of the resulting vertical coordinates, even under unfavorable situations, such as in coastal areas, where the reference networks for monitoring are implanted in only one of the sides of the point?Cobject region, which makes the situation more difficult and requires careful planning so that the use of GPS reaches the desired precision.     

Mobility of trace elements between the river water,the sediments,and the pore water of Las Catonas Stream,Buenos Aires Province,Argentina

The composition of river water, sediments, and pore waters (down to 30 cm below the bed) of Las Catonas Stream was studied to analyze the distribution of trace elements in a peri-urban site. The Las Catonas Stream is one of the main tributaries of Reconquista River, a highly polluted water course in the Buenos Aires Province, Argentina. The semi-consolidated Quaternary sediments of the Luján Formation are the main source of sediments for Las Catonas Stream. The coarse-grained fraction in the sediments is mainly composed of tosca (calcretes), intraclasts, bone fragments, glass shards, quartz, and aggregates of fine-grained sediments together with considerably amounts of vegetal remains. The clay minerals are illite, illite–smectite, smectite, and kaolinite. For the clay-sized fraction, the external surface area values are mostly between 70 and 110 m²g^?1, although the fraction at 15 cm below the bottom of the river shows a lower surface area of 12 m²g^?1. The N₂ adsorption–desorption isotherms at 77 K for this sample display a behavior indicative of non-porous or macroporous material, whereas the samples above and below present a typical behavior of mesoporous materials with pores between parallel plates (slit-shaped). As, Cr, Cu, and Cd concentrations increase down to 15 cm depth in the sediments, where the highest trace element and total organic carbon (TOC) concentrations were found, and then decrease toward the bottom of the core. Except for As, the levels of the other heavy metals show higher concentration in surficial waters than in pore waters. Distribution coefficients between the sediments, pore water, and surficial water phases indicate that As is released from the sediments to the pore and surficial waters. Cu content strongly correlates with TOC (mainly from vegetal remains), suggesting that this element is mainly bound to the organic phase.     

Evaluation and perspectives of using multitemporal L-band SAR data to monitor deforestation in the Brazilian Amazo/spl circ/nia

Japanese Earth Resources Satellite 1 (JERS-1) synthetic aperture radar (SAR) data were evaluated to map areas of deforestation in a Brazilian Amazo/spl circ/nia test-site. The results were compared with information derived from a Landsat TM multitemporal series. Unambiguous detection of deforested areas was observed only when the entire deforestation process (slash, burning, and terrain clearing) had already occurred. This result recommends further investigations on the effectiveness of horizontal polarization SAR data to map deforestation in a consistent basis. The cross-polarized (horizontal-vertical) channel designed to be in the ALOS/PALSAR system is expected to improve the distinction between forested and recently deforested areas.     

Site evaluation and RFI spectrum measurements in Portugal at the frequency range 0.408–10 GHz for a GEM polarized galactic radio emission experiment

We probed for radio frequency interference (RFI) at three potential galactic emission mapping experiment (GEM) sites in Portugal using custom made omnidirectional disconic antennas and directional pyramidal horn antennas. For the installation of a 10-m dish dedicated to the mapping of polarized galactic emission foreground planned for 2005–2007 in the 5–10 GHz band, the three sites chosen as suitable to host the antenna were surveyed for local radio pollution in the frequency range 0.01–10 GHz. Tests were done to look for radio broadcasting and mobile phone emission lines in the radio spectrum. The results show one of the sites to be almost entirely RFI clean and showing good conditions to host the experiment.     

Evolution of Ataúro Island: Temporal constraints on subduction processes beneath the Wetar zone, Banda Arc

Ataúro is a key to understanding the late stage volcanic and subduction history of the Banda Arc to the north of Timor. A volcanic history of bi-modal subaqueous volcanism has been established and new whole rock and trace element geochemical data show two compositional groups, basaltic andesite and dacite–rhyolite. ⁴⁰Ar/³⁹Ar geochronology of hornblende from rhyo-dacitic lavas confirms that volcanism continued until 3.3 Ma. Following the cessation of volcanism, coral reef marine terraces have been uplifted to elevations of 700 m above sea level. Continuity of the terraces at constant elevations around the island reflects regional-scale uplift most likely linked to sublithospheric processes such as slab detachment. Local scale landscape features of the eastern parts of Ataúro are strongly controlled by normal faults. The continuation of arc-related volcanism on Ataúro until at least 3.3 Ma suggests that subduction of Australian lithosphere continued until near this time. This data is consistent with findings from the earthquake record where the extent of the Wetar seismic gap to a depth of 350 km suggests slab breakoff, as a result of collision, commenced at ∼4 Ma, leading to subsequent regional uplift recorded in elevated terraces on Ataúro and neighbouring islands.     

Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil

Erosion is responsible for environmental degradation in continental and coastal areas with varying degrees of intensity and spatial range. In continental areas, rills and gullies affect urban and non-urban areas and may occur isolated or in groups. In urban areas, many forms of degradation occur, ranging from relief modifications (with runoff and other hydrological changes) to channel and reservoir silting. Other forms of degradation include the destruction of infrastructure items, such as streets, power lines and pipelines. Many mechanical, structural, agricultural, ecological and bioengineering measures can be adopted to control and restore these areas, with various results. In many cases, the applied techniques are unsuccessful and worsen the environmental problems. To illustrate such cases in Brazil, this study examines the adoption of different techniques to restore gullies in the cities of São Pedro, Franca, São Carlos, Casa Branca and Cajuru, in the state of São Paulo. These areas are characterized by sandy geology in a variety of landscapes, and the erosion processes result from natural and anthropogenic conditions. Additionally, Brazil’s coastal area has been affected by erosion, as in Fortaleza (in the state of Ceará). This study demonstrates that the primary factor associated with erosion in coastal and continental urban areas is the lack of territorial planning that considers the geological, hydrological and geotechnical limitations. In some of the studied areas, positive results have been achieved. However, unsatisfactory results predominate primarily because appropriate geological, environmental and geotechnical studies were not performed before the interventions were selected and implemented.     

Ionospheric tomography using GNSS: multiplicative algebraic reconstruction technique applied to the area of Brazil

Experimental analysis was performed using multiplicative algebraic reconstruction technique (MART) to map the ionosphere over Brazil. Code and phase observations from the global navigation satellite system (GNSS) together with the international reference ionosphere (IRI) enabled the estimation of ionospheric profiles and total electron content (TEC) over the entire region. Twenty-four days of data collected from existing ground-based GNSS receivers during the recent solar maximum period were used to analyze the performance of the MART algorithm. The results were compared with four ionosondes. It was demonstrated that MART estimated the electron density peak with the same degree of accuracy as the IRI model in regions with appropriate geometrical coverage by GNSS receivers for tomographic reconstruction. In addition, the slant TEC, as estimated with MART, presented lower root-mean-square error than the TEC calculated by ionospheric maps available from the International GNSS Service (IGS). Furthermore, the daily variations of the ionosphere were better represented with the algebraic techniques, compared to the IRI model and IGS maps, enabling a correlation of the elevation of the ionosphere at higher altitudes with the equatorial ionization anomaly intensification. The tomographic representations also enabled the detection of high vertical gradients at the same instants in which ionospheric irregularities were evident.