Photoluminescence spectra of S<Subscript>2</Subscript><Superscript><Emphasis Type="Bold">−</Emphasis></Superscript> center in natural and heat-treated scapolites

The emission and excitation spectra of yellow luminescence due to S₂ ⁻ in scapolites (#1 from Canada and #2 from an unknown locality) were observed at 300, 80 and 10 K. Emission and excitation bands at 10 K showed vibronic structures with a series of maxima spaced 15–30 and 5–9 nm, respectively. The relative efficiency of yellow luminescence from scapolite #2 was increased up to 117 times by heat treatment at 1,000°C for 2 h in air. The enhancement of yellow luminescence by heat treatment was ascribed to the alteration of SO₃ ²⁻ and SO₄ ²⁻ to S₂ ⁻ in scapolite.     

Modelling hydrodynamics in Yachiyo Lake using a non‐hydrostatic general circulation model with spatially and temporally varying meteorological conditions

In this study, a three‐dimensional (3D) non‐hydrostatic circulation model was applied to study the thermal structure, its evolution and water circulation of Yachiyo Lake in Hiroshima, Japan. The simulations were conducted for 1 month during July 2006. The meteorological forcing variables such as wind stress, surface atmospheric pressure and heat flux transfer through the lake surface were provided by an atmospheric mesoscale model run. The vertical mixing process of the lake was calculated using the Mellor‐Yamada turbulence model. The 1‐month numerical simulation revealed the wind‐induced currents of the lake, two gyres in the mid‐layer, and depth‐averaged monthly mean currents. Further numerical experiments studying the mechanism of the two gyres in the lake showed the important role of topography in gyre formation. The thermal structure of the lake and its evolution both in space and in time as predicted by the model showed very good agreement with the observed values and characteristics of Yachiyo Lake. The internal gravity waves, which are crucial for mixing in the stratified lake, are depicted by the vertical fluctuation of isotherms. Using the non‐dimensional gradient Richardson number, Yachiyo Lake was determined to be stable under strong stratification during the study period, and therefore very sensitive to wind stress. Copyright © 2009 John Wiley & Sons, Ltd.     

Vertical and horizontal distribution of fluorescent dissolved organic matter in the Southern Ocean

The vertical and horizontal distribution of fluorescent dissolved organic matter (FDOM), determined by fluorescence intensity at 320 nm excitation and 420 nm emission, were clarified in nine stations on two transects at the Southern Ocean, including a subtropical, subantarctic, polar frontal and Antarctic zone. All vertical profiles of fluorescence intensity showed that levels were lowest in the surface waters, increased with increasing the depth in mid-depth waters ( 2000 m), and then stayed within a relatively narrow range from there to the bottom. Such vertical profiles of FDOM were similar to those of nutrients, but were adverse to dissolved oxygen. In water columns below the temperature-minimum subsurface water (dichothermal waters) in the Antarctic zone and below the winter mixed layer in the other zones, we determined the relationships of fluorescence intensity to concentrations of nutrients and apparent oxygen utilization (AOU) over the entire area of the present study, and found significant linear correlations between the levels of fluorescence intensity and nutrient concentrations (r =  0.70 and 0.71 for phosphate and nitrate + nitrite, respectively) and AOU (r = 0.91). From the strong correlation coefficient between fluorescence intensity and AOU, we concluded that FDOM in the Southern Ocean is formed in situ via the biological oxidation of organic matter. The regeneration of the nutrients/consumption of the oxygen/formation of FDOM was active in mid-depth waters. However, the correlations between fluorescence intensities and nutrients and AOU were different in the mid-depth water masses, Subantarctic Mode Water (SAMW), and Antarctic Intermediate Water (AAIW), indicating that the sources of organic matter responsible for FDOM formation were different. A considerable amount of FDOM in the SAMW is thought to be produced by the remineralization of DOM in addition to sinking particulate organic matter, while DOM is less responsible for FDOM formation in the AAIW.     

Experimental study on the rheological properties of polycrystalline solid nitrogen and methane: Implications for tectonic processes on Triton

To investigate the evolution of any processes on planetary surfaces in the outer Solar System, the rheological properties of non-water ices were studied by means of a sound velocity measurement system and a uniaxial deformation apparatus. A pulse transmission method was used to obtain longitudinal (V_p) and transverse (V_s) wave velocities through solid nitrogen and methane at temperatures ranging from 5 to 64 K and from 5 to 90 K, respectively. The measured velocities confirmed that the solid methane and solid nitrogen samples were non-porous polycrystalline samples without any cracks and bubbles inside. Compression tests at constant strain-rate were performed for solid nitrogen and methane at temperatures of 5-56 K and 5-77 K, respectively, at strain-rates of 10⁻⁴-10⁻² s⁻¹. Both brittle and ductile behavior was observed for solid nitrogen and methane under these conditions. The maximum strength of solid nitrogen was observed to be 9 MPa in the brittle failure mode, and that of solid methane was 10 MPa. These low strengths cannot support cantaloupe structures with the topographic undulation larger than several kilometers found on Triton’s surface, suggesting that other materials such as H₂O ice could underlay solid methane and nitrogen and support these structures.     

Eoarchean–Paleoproterozoic zircon inheritance in Japanese Permo-Triassic granites (Unazuki area,Hida Metamorphic Complex): Unearthing more old crust and identifying source terrranes

U–Pb zircon geochronology of two Permo-Triassic granites (samples OT-52 and OT-272 with ages of 229 ± 8 Ma and 256 ± 2 Ma, respectively) in the Unazuki area, Hida Metamorphic Belt, southwest Japan, revealed the presence of Eoarchean to Paleoproterozoic inheritance. Inheritance is consistent with both samples showing low zircon saturation temperatures for their bulk compositions. In OT-52, dark in CL, low Th/U zircon domains have a mean ²⁰⁷Pb/²⁰⁶Pb age of 1940 ± 17 Ma, which is consistent with an age of 1937 ± 6 Ma for anatexis in the Precambrian Busan gneiss complex in Korea. Eoarchaean inherited zircons with ²⁰⁷Pb/²⁰⁶Pb ages from ca. 3750 to 3550 Ma are common in OT-272 but are few in OT-52, suggesting a source from rocks with affinities to those in the Anshan area in the northeast China part of the North China Craton. On the other hand, a Hida Metamorphic Belt metasedimentary gneiss into which the granites were intruded contains ca. 1840, 1130, 580, 360, 285 and 250 Ma zircons (Sano et al., 2000). These ages suggest that the Unazuki Mesozoic granites did not originate from proximal Hida Metamorphic Complex rocks, but instead from unrelated rocks obscured at depth. The predominance of Eoarchean to Paleoproterozoic age components, and the marked lack of 900–700 Ma components suggest that the source was the (extended?) fringe of the North China Craton, rather than from Yangtze Craton crust. The Mesozoic evolution of Japan and its linkages to northeast Asia are discussed in the context of these results.     

Fe–Mg partitioning between post-perovskite and ferropericlase in the lowermost mantle

Fe–Mg partitioning between post-perovskite and ferropericlase has been studied using a laser-heated diamond anvil cell at pressures up to 154 GPa and 2,010 K which corresponds to the conditions in the lowermost mantle. The composition of the phases in the recovered samples was determined using analytical transmission electron microscopy. Our results reveal that the Fe–Mg partition coefficient between post-perovskite and ferropericlase (K _D^PPv/Fp) increases with decreasing bulk iron content. The compositional dependence of K _D^PPv/Fp on the bulk iron content explains the inconsistency in previous studies, and the effect of the bulk iron content is the most dominant factor compared to other factors, such as temperature and aluminum content. Iron prefers ferropericlase compared to post-perovskite over a wide compositional range, whereas the iron content of post-perovskite (X _Fe^PPv, the mole fraction) does not exceed a value of 0.10. The iron-rich ferropericlase phase may have significant influence on the physical properties, such as the seismic velocity and electrical conductivity at the core–mantle boundary region.     

Compositional variability on the surface of 4 Vesta revealed through GRaND measurements of high‐energy gamma rays

Measurements of the high‐energy gamma‐ray flux emanating from asteroid 4 Vesta by the Dawn Gamma‐Ray and Neutron Detector (GRaND) have revealed variability in the near‐surface elemental composition of the Vestan surface. These observations are consistent with the presence of large (≥8 × 10⁴ km²) regions with distinct, HED‐like elemental compositions. The results agree broadly with other global measurements, such as the macroscopic neutron absorption cross section and spectral reflectance‐derived mineralogic maps. Two distinct regions with eucrite‐like elemental compositions have been identified, the first located primarily within the Lucaria and Marcia quadrangles and the second within Oppia quadrangle. The former region is collocated with some of the oldest, most heavily cratered terrain on Vesta. The interior of the 500 km diameter Rheasilvia impact basin is found to have a composition that is consistent with diogenite‐like material. Taken together, these observations support the hypothesis that Vesta's original crust was composed of basaltic outflows in the form of eucritic‐like material and that the Rheasilvia‐basin‐forming impact exposed lower‐crustal, diogenite‐like material. These measurements also constrain the maximum amount of mesosiderite‐like material to <10% for each 15 × 15° surface element.     

Large-Eddy Simulation of Coherent Flow Structures within a Cubical Canopy

Instantaneous flow structures “within” a cubical canopy are investigated via large-eddy simulation. The main topics of interest are, (1) large-scale coherent flow structures within a cubical canopy, (2) how the structures are coupled with the turbulent organized structures (TOS) above them, and (3) the classification and quantification of representative instantaneous flow patterns within a street canyon in relation to the coherent structures. We use a large numerical domain (2,560 m × 2,560 m × 1,710 m) with a fine spatial resolution (2.5 m), thereby simulating a complete daytime atmospheric boundary layer (ABL), as well as explicitly resolving a regular array of cubes (40 m in height) at the surface. A typical urban ABL is numerically modelled. In this situation, the constant heat supply from roof and floor surfaces sustains a convective mixed layer as a whole, but strong wind shear near the canopy top maintains the surface layer nearly neutral. The results reveal large coherent structures in both the velocity and temperature fields “within” the canopy layer. These structures are much larger than the cubes, and their shapes and locations are shown to be closely related to the TOS above them. We classify the instantaneous flow patterns in a cavity, specifically focusing on two characteristic flow patterns: flushing and cavity-eddy events. Flushing indicates a strong upward motion, while a cavity eddy is characterized by a dominant vortical motion within a single cavity. Flushing is clearly correlated with the TOS above, occurring frequently beneath low-momentum streaks. The instantaneous momentum and heat transport within and above a cavity due to flushing and cavity-eddy events are also quantified.     

Evaluation of the JNLT site

Two steps have been taken to decide at what place and altitude to set up the JNLT on Mauna Kea. First, the wind tunnel experiment has been made in collaboration with the Institute of Meteorology using the two models of summit area with the reduced scales of 1/1000 and 1/5000. This study tells us that the north-west cone is suitable for JNLT. Secondly, we have done the measurement of the microthermal activities in this area with a 30 m tower, which was continued for about 4 months in collaboration with the University of Hawaii. This experiment has given the mean vertical profile ofC _T ² over 4 months and its scale height in the boundayr layer on our site. By use of these measurements, the contribution of the boundary layer to seeing is estimated. The behaviour ofC _T ² under strong winds can be explained very well by topographic effects, which is in fairly good agreement with the results of our wind tunnel experiment.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.     

Measurements of carbon dioxide in the Seto Inland Sea of Japan

The carbon dioxide in seawater (pCO₂) was measured in the Seto Inland Sea of Japan using newly developed equilibrator instrument designed to be free from the correction for addition or extraction of the carbon dioxide from carrier gas. The temperature dependence of pCO₂ was about 4.5%pCO₂/°C for a single seawater sample which was processed as free from biological activity and change in total carbon dioxide content during an experiment. The decrease in pCO₂ during daylight hours due to the photosynthetic fixation was about 30% of the daily mean of pCO₂ during warm months and about 15% during cold months. The effect of carbon dioxide exchange between air and seawater on pCO₂ was about 0.6 ppm in August and about 0.1 ppm in March. This is negligible small compared with the daily oscillation of carbon dioxide in seawater.