地质聚合物技术的发展近况

概要介绍了一种无机聚合物———地质聚合物。首先对地质聚合物材料的制备过程作了介绍。根据原料的不同,地质聚合物材料的制备可以有两种途径:一种是以偏高岭石为基础原料,一种是以粉煤灰为主要原料。通常以硅酸钠水溶液作为单体硅源,氢氧化钠溶液作为碱激发剂以提高原料的溶出性。对某些在常温和低于100 ℃下制备的独石材料作了介绍。对煅烧高岭石,叶蜡石,粉煤灰和钢渣的溶出特性作了阐述。应用SEM EDX,对以粉煤灰为原料的地质聚合物材料的化学组成作了分析。最后对地质聚合物材料的经济性以及在环境保护等领域的应用前景,特别是在减少二氧化碳排放与废弃物处理方面的意义作了介绍。     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Orbital dispersion of comet Encke's meteoroids

The orbital evolution of model meteoroids ejected from the comet Encke has been investigated. The particles abandon the mother body with velocities 20 and 40 ms^-1 perihelion within the interval of the past 10,000 years. Their 10,000 years old osculating orbits were numerically integrated forward, using a dynamical model of the solar system consisting of all planets. Forces from solar electromagnetic and corpuscular radiation effecting the particles are considered, too. Orbital dispersions of the model meteoroids are presented. The importance of nongravitational forces for a long-term orbital evolution of meteoroid streams is shown.     

Development of a geotechnical and geophysical database for seismic zonation of the Ankara Basin,Turkey

The Kocaeli earthquake (M _w = 7.4) of 17 August 1999 occurred in the Eastern Marmara Region of Turkey along the North Anadolu Fault and resulted in a very serious loss of life and property. One of the most important geotechnical issues of this event was the permanent ground deformations because of both liquefaction and faulting. These deformations occurred particularly along the southern shores of ?zmit Bay and Sapanca Lake between the cities of Yalova and Adapazar? in the west and east, respectively. In this study, three sites founded on delta fans, namely De?irmendere Nose, Yeniköy tea garden at Seymen on the coast of ?zmit Bay, and Vak?f Hotel site on the coast of Sapanca Lake were selected as typical cases. The main causes of the ground deformations at these sites were then investigated. Geotechnical characterization of the ground, derivation of displacement vectors from the pre- and post-earthquake aerial photographs, liquefaction assessments based on field performance data, and analyses carried out using the sliding body method have been fundamental in this study. The displacement vectors determined from photogrammetric evaluations conducted at De?irmendere and Seymen showed a combined movement of faulting and liquefaction. But except the movements in the close vicinity of shorelines, the dominant factor in this movement was faulting. The results obtained from the analyses suggested that the ground failure at De?irmendere was a submarine landslide mainly because of earthquake shaking rather than liquefaction. On the other hand, the ground failures at the Yeniköy tea garden on the coast of Seymen and the hotel area in Sapanca town resulted from liquefaction-induced lateral spreading. It was also obtained that the ground deformations estimated from the sliding body method were quite close to those measured by aerial photogrammetry technique.     

The status of the passive treatment systems for acid mine drainage in South Korea

This study was performed to investigate the operating status, evaluate the problems, and discuss possible improvement methods of passive treatment systems for acid mine drainage (AMD) in South Korea. Thirty-five passive treatment systems in 29 mines have been constructed from 1996 to 2002 using successive alkalinity producing systems (SAPS) as the main treatment process. We investigated 29 systems (two for metal mines), 19 of which revealed various problems. Overflows of drainage from SAPS, wetland, or oxidation ponds were caused by the flow rate exceeding the capacities of the facilities or by the reduced permeability of the organic substance layer. Leakages occurred at various parts of the systems. In some cases, clogged and broken pipes at the mouths of the mine adits made the whole system unusable. Some systems showed very low efficiencies without apparent leakage or overflow. Even though the systems showed fairly good efficiencies in metal removal ratios (mainly iron) and pH control; sulfate removal rates were very poor except in three systems, which may indicate very poor sulfate reductions with sulfate reducing bacteria (SRB) as a means.     

AN EMPIRICAL STUDY OF THE ELECTRON TEMPERATURE AND HEAVY ION VELOCITIES IN THE SOUTH POLAR CORONAL HOLE

The solar wind ions flowing outward through the solar corona generally have their ionic fractions freeze-in within 5 solar radii. The altitude where the freeze-in occurs depends on the competition between two time scales: the time over which the wind flows through a density scale height, and the time over which the ions achieve ionization equilibrium. Therefore, electron temperature, electron density, and the velocity of the ions are the three main physical quantities which determine the freeze-in process, and thus the solar wind ionic charge states. These physical quantities are determined by the heating and acceleration of the solar wind, as well as the geometry of the expansion. In this work, we present a parametric study of the electron temperature profile and velocities of the heavy ions in the inner solar corona. We use the ionic charge composition data observed by the SWICS experiment on Ulysses during the south polar pass to derive empirically the electron temperature profile in the south polar coronal hole. We find that the electron temperature profile in the solar inner corona is well constrained by the solar wind charge composition data. The data also indicate that the electron temperature profile must have a maximum within 2 solar radii. We also find that the velocities of heavy ions in their freeze-in regions are small (<100 km s^-1) and different elements must flow at different velocities in the inner corona.     

Space–time multiple regression model for grid-based population estimation in urban areas

We can collect, store, and analyze a huge amount of information about human mobility and social interaction activities due to the emergence of information and communication technologies and location-enabled mobile devices under cyber physical system frameworks. The high spatial resolution of population data on a multi-temporal scale is required by transport planners, human geographers, social scientists, and emergency management teams. In this study, we build a space-time multiple regression model to estimate grid-based (500 m × 500 m) spatial resolution at multi-temporal scale (30-min intervals) population data based on the space-time relationship among geospatially enabled person trip (PT) survey data and incorporate both mobile call (MC) and geotagged Twitter (GT) data. Since using geospatially enabled PT survey data as dependent variables enables us to acquire actual population amounts, which strongly depend on MCs and social interaction activities. Although many grids have a strong correlation between PT and MC/GT, some show fewer correlation results, especially where the grids have factories, schools, and workshops in which fewer MCs are found but a large population is presented. Although GT data are sparser than MCs, people from amusement and tourist areas can be detected by GT data. The space-time multiple regression model can also estimate the different amounts of populations based on human travel behavior that changes over space and time. According to accuracy assessments, the night-time estimated results, especially between 00:00 and 06:30, strongly correlate with national census data except in places where the grids have railway and subway stations.     

Log N — log S of radio sources at 10 GHz with flat spectra

A logN — logS relation at 10 GHz is constructed for sources with the flat spectra 0.5 (flux densitySv ^–) from observations at NRO, MPIfR and others. Based on the source distribution on log (Luminosity) volume plane we obtain an epoch-depending luminosity function which explains the above relation.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.Nobeyama Radio Observatory, a branch of the Tokyo Astronomical Observatory, University of Tokyo, is a facility open for general use by researchers in the field of astronomy and astrophysics.     

Das stereoautographische Verfahren — ein neues Mittel zur automatischen Herstellung genauer Schichtenlinienkarten und Pläne

Ohne Zusammenfassung     

Characteristics of Seafloor Morphology and Ferromanganese Nodule Occurrence in the Korea Deep-sea Environmental Study (KODES) Area, NE Equatorial Pacific

Seafloor morphology and ferromanganese nodule occurrence were studied using a multibeam side scan sonar (SeaBeam, 2000) and a deep-sea camera system in the Korea Deep-sea Environmental Study (KODES) area, northeast equatorial Pacific. Seafloor morphology and nodule abundance are highly variable even in this small study area. The NNE-SSW oriented hills are parallel and about 100-200 m high. Valleys are very flat-floored, while hilltops are rugged with depressions of tens of meters. Cliffs to about 100 m bound the valleys and the hills. The study area can be classified into three types based both on nodule occurrence and seafloor morphology, mostly G- and B-types and some M-type. G-type is characterized by high nodule abundance, ubiquitous bioturbation, and flat seafloor morphology, while B-type is characterized by irregular-shaped nodules, variable nodule abundance, occurrence of giant nodules and sediment lumps, rugged bottom morphology with depressions, and white calcareous surface sediments. Medium nodule abundance and a generally flat seafloor characterize M-type. G-type occurs mostly in the valley regions, while B-type is on the hilltop areas. M-type is located between the hilltop and the valley. Tectonic movement of the Pacific plate resulted in the elongated abyssal hills and cliffs. The rugged morphology on hilltops resulted from erosion and redistribution of surface siliceous sediments on hilltops by bottom currents, outcropping of underlying calcareous sediments, and dissolution of the carbonate sediments by corrosive bottom water undersaturated with CaCO 3 . Sediment eroded from the hills, which is relatively young and organic-rich, is deposited in the valleys, and diagenetic metal supply to manganese nodules in the valley area is more active than on the hills. We suggest that tectonic movement ultimately constrains morphology, surface sediment facies, bottom currents and sediment redistribution, bioturbation, thickness of the sedimentary layer, and other conditions, which are all interrelated and control nodule occurrence. The best potential area for mining in the study area is the G-type valley zones with about 3-4 km width and NNW-SSE orientation.