Coseismic and other short-term strain changes recorded with Sacks-Evertson strainmeters in a deep mine, South Africa

Summary. During 1977 March and April, three Sacks-Evertson borehole dilatometers were installed at the ends of boreholes drilled into the sidewall of an experimental tunnel at a depth of 3.1 km in the ERPM gold mine near Johannesburg. In the following year coseismic strain changes ranging from 5 ± 10⁻¹⁰ to values exceeding 5 ± 10⁻⁶ were recorded for hundreds of mine tremors in the magnitude range -1 to 3.7 and at hypocentral distances of 50 m to about 2 km. Hypocentral coordinates and magnitudes were determined from seismograms recorded from an underground array of geophones. Amplitudes and polarities of the coseismic strain steps are generally in excellent agreement with theoretical expectations based on point-source dislocation theory; specifically, the strain steps are proportional to the seismic moment divided by the cube of hypocentral distance. At a strain level of 5 ± 10⁻⁹ or greater the tremors do not appear to be preceded by any short-term indications of instability even for tremors producing coseismic steps greater than 5 ± 10⁻⁶ and for which the strainmeters were within a source radius of the hypocentre. Continuous strain changes observed at the times when the mine excavation, at a distance of about 100 m, is extended are in good agreement with calculated changes based on the theory of elasticity. A similar calculation is consistent with post-seismic strain changes observed to follow some of the closer tremors. These post-seismic strains show a logarithmic dependence on time following the tremor and appear to be due to the interaction of a tremor with the adjacent mine excavation rather than to deformation within the actual seismic source region.     

Effect of Electron Precipitations on the Effective Recombination Coefficient

The results of an analysis of the possible effect of auroral electron fluxes on the effective recombination coefficient α_eff in the ionosphere are presented. It is shown that the α_eff value in the E-region of the ionosphere is determined mainly by the physical-chemical properties of the medium. In the F1-layer of the ionosphere, the effective recombination coefficient becomes dependent on both the value of the energy flux and the type of the energy spectrum of the auroral electron flux.     

Global Dynamic Model of Critical Frequency of the Ionospheric F2 Layer

Geomagnetism and Aeronomy - A global dynamic model of the F2 layer of the ionosphere GDMF2 is designed to calculate foF2 in both quiet and geomagnetically disturbed conditions. The term...     

Ancient volcanic glasses of the Urals

The existing data on findings of unaltered volcanic glasses in the Paleozoic (from Late Ordovician to Late Devonian inclusive) volcanic strata of the Ural fold belt are systematized. These glasses have compositions that correspond to tholeiitic basalts, potassic alkaline basaltoids, andesites, and rhyolites. Relic portions of glasses of cenotypal appearance are preserved in thick glassy crusts of pillow lava flows, in fragments among hyaloclastites, in bombs from tuffs, and in extrusive bodies and dykes. Chemical analysis showed that the amount of dissolved water was low (1–1.3 wt %) in the primary tholeiitic magma and higher (8–10 wt %) in the magma that formed island-arc hyalobasalts, potassic alkaline basaltoids, andesites and rhyolites.     

Interaction of internal waves with a horizontally inhomogeneous density field area overlying a ridge

In the context of the general linear theory, we consider the propagation of an internal tide across a frontal zone overyling an oceanic ridge. For a uniformly stratified ocean, the solution was derived using Riemann's technique. The dependences of the generated internal wave amplitudes on the stratification parameters and bottom topography were determined. We have found that wave disturbances of high intensity inside and in the neighbourhood of the ridge may be concentrated in raytype areas. An increase of the horizontal density gradient in the frontal zone results in a perceptible deformation of these areas.Translated by Vladimir A. Puchkin.     

Atmospheric temperature sounding with the Fourier spectrometer

Preliminary results of a space experiment using the IKFS-2 infrared sounder (Meteor-M2 satellite) showed high-quality of measurements of spectra of the outgoing thermal radiation of the atmosphere–surface system and the adequacy of developed IR radiation atmospheric models in the 15-μm carbon gas absorption band used to recover the vertical profiles of the atmospheric temperature. Outgoing radiation spectra measured by IKFS-2 instruments make it possible to restore vertical temperature profiles with errors close to 1K in most of the 0–30 km high-altitude region, except for the lower troposphere and altitudes above 30 km, where these errors are close to 2–3K.     

The stable aryl hydrocarbon receptor agonist potency of United Kingdom Continental Shelf (UKCS) offshore produced water effluents

The in vitro aryl hydrocarbon receptor (AhR) agonist potency of offshore produced water effluents, collected from the United Kingdom Continental Shelf, was determined using the dioxin responsive (DR)-chemically activated luciferase expression (CALUX) assay. Octadecylsilane (C18) solid phase extraction (SPE) extracts of produced water were exposed to DR-CALUX cells for 24 h in order to investigate the contribution in potency from compounds that are stable to metabolism by the CALUX cells during exposure. The stable AhR agonist potency determined over 24 h was highly variable and ranged from 1 to 430 ng TCDD TEQ_CALUX l⁻¹. These data reflect the highly variable composition of produced water discharges from different production fields. It is recommended that further work be performed to characterise the full range of stable dioxin like AhR agonists present in offshore produced water discharges using techniques such as bioassay-directed analysis.     

A probabilistic performance‐based approach for mitigating the seismic pounding risk between adjacent buildings

Existing design procedures for determining the separation distance between adjacent buildings subjected to seismic pounding risk are based on approximations of the buildings' peak relative displacement. These procedures are characterized by unknown safety levels and thus are not suitable for use within a performance‐based earthquake engineering framework. This paper introduces an innovative reliability‐based methodology for the design of the separation distance between adjacent buildings. The proposed methodology, which is naturally integrated into modern performance‐based design procedures, provides the value of the separation distance corresponding to a target probability of pounding during the design life of the buildings. It recasts the inverse reliability problem of the determination of the design separation distance as a zero‐finding problem and involves the use of analytical techniques in order to evaluate the statistics of the dynamic response of the buildings. Both uncertainty in the seismic intensity and record‐to‐record variability are taken into account. The proposed methodology is applied to several different buildings modeled as linear elastic single‐degree‐of‐freedom (SDOF) and multi‐degree‐of‐freedom (MDOF) systems, as well as SDOF nonlinear hysteretic systems. The design separation distances obtained are compared with the corresponding estimates that are based on several response combination rules suggested in the seismic design codes and in the literature. In contrast to current seismic code design procedures, the newly proposed methodology provides consistent safety levels for different building properties and different seismic hazard conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of the geomagnetic induction tensor

The geomagnetic induction tensor is a means of summarizing the response of the earth at a given observing site to a geomagnetic variation source field. In this paper the characteristics of the tensor elements are examined, both generally and for the special cases of one-dimensional and two-dimensional geologic structure. The first-order model is taken of uniform source fields originating external to a semi-infinite half-space. Graphical ways of presenting the information contained in an induction tensor are explored, including ellipses of rotation, polar diagrams, and diagrams analogous to the Mohr circles of elasticity theory. Criteria to distinguish “two-dimensional” data from “three-dimensional” data are established. The advantages of simultaneously recording “normal” and “anomalous” variations are demonstrated in terms of the extra tensor elements which may then be estimated. The most practical way of presenting information from many stations on a map may be by drawing, for each site, arrows which summarize the response in the vertical field and quadrics which summarize the response in the horizontal field.