Using Memoranda of Understanding to facilitate marine management in Canada

Like many other coastal states, management of Canada’s offshore areas is complicated by the division of authority among differing government departments and agencies. However, as a Confederation, this administrative complexity in Canada is further exacerbated by the jurisdictional division of powers between the Federal Parliament and the Provincial Legislatures. The most common tool for overcoming this division and facilitating cooperation are formalized non-binding agreements known as Memoranda of Understanding (MOUs). While there are a large number of MOUs in existence in Canada, few are being implemented. In part, this is because the non-binding nature of the agreement means that either party may discard their obligations at will. This has led to many useful MOUs being discarded and years of work and resources expended negotiating these agreements being wasted. This paper discusses the findings from three such agreements, each focusing on efforts to manage Canada’s offshore resources. It highlights the importance of six factors capable of increasing the likelihood that any given MOU aimed at collaboration between different authorities will be successful. These factors include: a foundation of cooperation, clear statement of priorities, feasible and adaptable work plans, integration at various management levels, a legislative foundation, and adequate financial resources.     

对虾传染性肌肉坏死病研究进展

对虾传染性肌肉坏死病(infectious myonecrosis,IMN)最初于2002年8月爆发于巴西Piaui州的凡纳滨对虾(Litopenaeus vannamei)养殖场,并很快在巴西东北沿岸蔓延开来,目前已传至亚洲.2004年,经美国亚利桑那大学(University of Arizona)水产病害实验室研究,该病为一种新的对虾疾病,根据其症状,暂定名为传染性肌肉坏死病.     

On the use of compliant fairings on conventional moorings

Abstract

Compliant fairing made of plastic ribbons or flexible rubber filaments can be attached to the cables of taut‐line moorings to reduce the drag force of the currents. The efficiency of such fairing depends upon its orientation in the flow and the Reynolds number of the cable. Results of using filament fairing manufactured by ENDECO Inc. on a 337‐m long mooring in the mouth of Hudson Strait are discussed. The fairing was found to be detrimental in this application because of twisting of the wire rope, producing a “bottle‐brush” configuration, and because the normal drag coefficient Cd ? 2.5 ± 0.45 was found to exceed that of a bare cable by 65 per cent on average. The Reynolds number range for this drag coefficient was 2.6 × 10³ to 4.2 × 10³ and was determined by force measurements in a flume. It is concluded that the problems of correctly orienting the fairing in the flow, and the true drag coefficient for Reynolds numbers less than about 5 × 10⁴ must be carefully addressed in the design of conventional taut‐line moorings. Drag coefficients found in this study imply that compliant fairings would not be warranted for Reynolds numbers below about 5 × 10⁴ unless strumming was expected for bare cables.     

Early Cretaceous uplift and erosion of the northern Appalachian Basin, New York, based on apatite fission track analysis

The thermal history of outcropping Devonian sediments of the northern Appalachian Basin, New York, has been investigated using fission track analysis of detrital apatites from 57 sandstone samples. Based on lengths and apparent age measurements using fission tracks in apatite it is concluded that Lower Devonian sediments presently at the surface in the Catskill region were cooled rapidly from temperatures higher than about 110°C during Early Cretaceous times (120–140 Ma ago). In the western part of New York (Wellsville-Buffalo) data from late Devonian sediments are consistent with cooling at the same time as that identified for the Catskill region but from lower temperatures, in the range of approximately 80–110°C, the maximum temperature these sediments experienced since deposition. For a pre-uplift paleogeothermal gradient of 25–35°C/km, the confined track length data indicates uplift and erosion of 2–3 km for western New York and greater than 3–4 km for the Catskill region, a differential uplift pattern which is consistent with the historical stratigraphic data from the region. This conclusion is at variance with earlier interpretations put forth by others.Rapid broad scale uplift and erosion of the scale identified imply that large volumes of sediment could have been supplied from the northern Appalachian Basin during the Early Cretaceous. This timing for the dominant post-Devonian cooling phase in the basin is not accounted for by recent models of the tectonic evolution of the Appalachian Orogen but is compatible with the change from carbonate to siliciclastic deposition in the Atlantic coastal plain. It is suggested that this style of broad regional uplift without significant deformation is characteristic of a tectonic regime associated with, and subsequent to, continental rifting.Apatite fission track analysis is shown to be a basic tool in providing fundamental limits for thermal history assessment in regional tectonic problems.     

Derivation of gold by oxidative metamorphism of a deep ductile shear zone: Part 1. Conceptual model

Quartz-carbonate gold deposits were emplaced in shear zones at or above the brittle-ductile transition. Some of the largest deposits are known to have formed along major, long-lived, transcurrent shears. Shears of this type widened downwards in the ductile regime, as a result of decreasing rock viscosity with depth; some were as wide as 40 km at depths of granulite facies metamorphism. Ductile shears are permeable and, since the permeability is along microfractures, fluid flow was pervasive, providing the opportunity for extensive chemical reaction. Reaction rates were enhanced by shear heating and by deformation-induced stress gradients in minerals, and reductions in grain size. Fluid flow tended to be upwards, because of pressure drop into the brittle portion of the shear. Given the wedge-shaped profile of ductile shears, fluids that had passed through a large volume of lower crust would have been focused at the brittle-ductile transition. Thus, if processes existed to selectively remove elements during fluid movement through the lower crust, these elements would also have been focused at this transition.One of the most constant features of quartz-carbonate lodes is carbonate alteration, which may extend kilometers out from major deposits. The ¹³C signature of this is consistent with a mantle source for the CO₂. Upward-moving CO₂ vapour of probable mantle origin has been implicated in the dehydration of amphibolite facies rocks to granulites and the concomitant depletion of large ion lithophile elements (LILE). The best documented cases of modification of the lower crust by CO₂ are from major shear zones. CO₂ streaming at depth could only have occurred under conditions more oxidizing than that required for graphite stability. These conditions favour solubility of gold by (a) oxidizing Au⁰ to Au⁺; (b) by dissolving sulphide from the rocks to complex with Au⁺. Recent work has shown that some major Archean gold deposits were derived from relatively oxidized fluids.A conceptual model is outlined for the genesis of at least some quartz-carbonate gold deposits. CO₂ permeating deep ductile shear zones dehydrated amphibolite facies rocks. A relatively oxidized CO₂-H₂O fluid was produced, which dissolved sulphide and gold from large volumes of lower crust. Gold was carried upwards in the narrowing shear, to be focused and precipitated at or above the brittle-ductile transition.     

Measured elastic moduli of single-crystal MgO up to 1800 K

Using the rectangular parallelepiped resonance method we measured the temperature dependence of the adiabatic elastic moduli of single-crystal MgO over the temperature range 300–1800 K. The high temperature limit of our measurements extends by 500 K the upper limit over which elasticity data on MgO are now available. Although our measured temperature dependence of C _ij ^s are generally in good agreement with previous measurements over a more narrow range in temperature, we found that C ₄₄ ^s decreases more rapidly with temperature, for T > 1000 K, than previous studies suggest. We also found that each of the slopes (?C ₁₁ ^s /?T)_p, (?K_s/?T)_p, and (C ₄₄ ^s /?T)_p become less negative with increasing temperature for T > 1400 K. From our measurements on elasticity we are able to confirm that the Grüneisen parameter at zero pressure is nearly constant with temperature up to 1800 K, with only a slight decrease above 1000 K. Utilizing our new data we present calculations showing the temperature dependence of thermodynamic parameters important in studies of earth's interior.     

Effects of F,B2O3 and P2O5 on the solubility of water in haplogranite melts compared to natural silicate melts

The effects of F, B₂O₃ and P₂O₅ on the H₂O solubility in a haplogranite liquid (36 wt. % SiO₂, 39 wt. % NaAlSi₃O₈, 25 wt. % KAlSi₃O₈) have been determined at 0.5, 1, 2, and 3 kb and 800, 850, and 900°C. The H₂O solubility increases with increasing F and B content of the melt. The H₂O solubility increase in more important at high pressure (2 and 3 kb) than at low pressure (0.5 kb). At 2 kb and 800°C, the H₂O solubility increases from 5.94 to 8.22 wt. % H₂O with increasing F content in the melt from 0 to 4.55 wt. %, corresponding to a linear H₂O solubility increase of 0.53 mol H₂O/mol F. With addition of 4.35 wt. % B₂O₃, the H₂O solubility increases up to 6.86 wt. % H₂O at 2 kb and 800°C, corresponding to a linear increase of 1.05 mol H₂O/mol B₂O₃. The results allow to define the individual effects of fluorine and boron on H₂O solubility in haplogranitic melts with compositions close to that of H₂O-saturated thermal minima (at 0.5–3 kb). Although P has a dramatic effect on the phase relations in the haplogranite system, its effect on the H₂O solubility was found to be negligible in natural melt compositions. The concominant increase in H₂O solubility and F can not be interpreted on the basis of the available spectroscopic data (existence of hydrated aluminofluoride complexes or not). In contrast, hydrated borates or more probably boroxol complexes have been demonstrated in B-bearing hydrous melts.