Laboratory modeling of topographic Rossby normal modes

The physical modeling of topographic Rossby normal modes carried out at the “Coriolis” Rotating Platform (Grenoble), is presented. The basic feature of the bottom topography is a linear slope of 4.3 m×2 m delimited by two lateral walls. Since the studied motions are essentially barotropic, homogeneous water was used. Unsheared currents were generated by a simple movement of a wavemaker located in front of the topographic barrier. The conservation of potential vorticity for the currents flowing onto the channel slope produced Rossby waves: reflections at the lateral boundaries then led to the formation of propagating barotropic Rossby normal modes, whose frequencies and spatial structures were selected by the physical system. The currents were measured through the correlation imaging velocimetry (CIV) method, which allowed an extremely detailed synoptic map of the horizontal velocities in an area (13 m²) including the slope to be obtained every 30 s.A variety of experiments were performed in order to provide a complete process study in which the effect of different channel lengths and rotation periods could be tested. Two different lengths of the linear slope, 4.3 and 3.3 m, and rotation periods ranging from 30 to 50 s were considered. The qualitative analysis of the 2D current patterns, and the good agreement found between the measured eigenperiods and the periods obtained by means of a simple analytical model, show that in all cases the first Rossby normal mode was generated. Moreover, numerical simulations based on the shallow-water equations, for a geometry and paddle movements that match closely the experimental setup, allow to calibrate the analytical model and provide useful information on a discrepancy found between experimental and analytical eigenperiods due to an oscillation of the normal mode trajectory.     

Evaluation of uncertainties in the CRCM-simulated North American climate

This work is a first step in the analysis of uncertainty sources in the RCM-simulated climate over North America. Three main sets of sensitivity studies were carried out: the first estimates the magnitude of internal variability, which is needed to evaluate the significance of changes in the simulated climate induced by any model modification. The second is devoted to the role of CRCM configuration as a source of uncertainty, in particular the sensitivity to nesting technique, domain size, and driving reanalysis. The third study aims to assess the relative importance of the previously estimated sensitivities by performing two additional sensitivity experiments: one, in which the reanalysis driving data is replaced by data generated by the second generation Coupled Global Climate Model (CGCM2), and another, in which a different CRCM version is used. Results show that the internal variability, triggered by differences in initial conditions, is much smaller than the sensitivity to any other source. Results also show that levels of uncertainty originating from liberty of choices in the definition of configuration parameters are comparable among themselves and are smaller than those due to the choice of CGCM or CRCM version used. These results suggest that uncertainty originated by the CRCM configuration latitude (freedom of choice among domain sizes, nesting techniques and reanalysis dataset), although important, does not seem to be a major obstacle to climate downscaling. Finally, with the aim of evaluating the combined effect of the different uncertainties, the ensemble spread is estimated for a subset of the analysed simulations. Results show that downscaled surface temperature is in general more uncertain in the northern regions, while precipitation is more uncertain in the central and eastern US.     

A discontinuous climatic record from 187 to 74 ka from a speleothem of the Clamouse Cave (south of France)

This study presents a continental paleoclimatic record in the south of France, based on δ¹⁸O, δ¹³C and the ²³⁴U/²³⁸U activity ratio, dated by the ²³⁰Th/²³⁴U disequilibrium method with thermal ionization mass spectrometry. A stalagmite (Cla4) from the Clamouse Cave offers a discontinuous stable isotopic record between 189 ka and 74 ka which covers marine isotope stages (MIS) 7, 6.4, 5.5, 5.3 and 5.1. The growth phases of the Cla4 stalagmite correspond to high sea level stages, except during MIS 6.4 (169-162 ka). All the growth phases of Cla4 correspond to humid periods, corresponding to the sapropel events observed in the eastern Mediterranean basin. Thus, the influence of a strong hydrological activity in the eastern Mediterranean basin during these periods prevailed as far west as the south of France. Because the karstic system studied strongly buffers the isotopic composition of water, isotopic variations of the calcite deposited in the cave represent mainly global and large-scale environmental variations when isotopic equilibrium conditions prevailed for calcite crystallization. Sub-stage 5.3, the end of 5.5 and MIS 7 were colder by about 4-6°C (calculated temperature) compared to present-day temperature while the growth phases of sub-stages 5.1 and the beginning of 5.5 reflect environmental conditions close to present ones. The δ¹⁸O and δ¹³C values of cave deposits of the sub-stage 6.4 are: (1) strongly marked by kinetic fractionation processes such as evaporation due to moisture deficit within the cave atmosphere during the first step of this growth phase and (2) related to higher humidity due to a second period of enhanced rainfall during the second step of growth. This study shows that even if calcite has not been deposited at isotopic equilibrium, its isotopic composition can give insights into the environmental conditions at the time of deposition.     

An evaluation of the surface radiation budget over North America for a suite of regional climate models against surface station observations

Components of the surface radiation budget (SRB) [incoming shortwave radiation (ISR) and downwelling longwave radiation (DLR)] and cloud cover are assessed for three regional climate models (RCM) forced by analysed boundary conditions, over North America. We present a comparison of the mean seasonal and diurnal cycles of surface radiation between the three RCMs, and surface observations. This aids in identifying in what type of sky situation simulated surface radiation budget errors arise. We present results for total-sky conditions as well as overcast and clear-sky conditions separately. Through the analysis of normalised frequency distributions we show the impact of varying cloud cover on the simulated and observed surface radiation budget, from which we derive observed and model estimates of surface cloud radiative forcing. Surface observations are from the NOAA SURFRAD network. For all models DLR all-sky biases are significantly influenced by cloud-free radiation, cloud emissivity and cloud cover errors. Simulated cloud-free DLR exhibits a systematic negative bias during cold, dry conditions, probably due to a combination of omission of trace gas contributions to the DLR and a poor treatment of the water vapor continuum at low water vapor concentrations. Overall, models overestimate ISR all-sky in summer, which is primarily linked to an underestimate of cloud cover. Cloud-free ISR is relatively well simulated by all RCMs. We show that cloud cover and cloud-free ISR biases can often compensate to result in an accurate total-sky ISR, emphasizing the need to evaluate the individual components making up the total simulated SRB.     

Impact of Boundary-Layer Processes on Near-Surface Turbulence Within the West African Monsoon

High frequency measurements of near-surface meteorological data acquired in north Benin during the 2006 West African monsoon seasonal cycle, in the context of the African Monsoon Multidisciplinary Analysis (AMMA) experiment, offer insight into the characteristics of surface turbulence in relation to planetary boundary-layer (PBL) processes. A wide range of conditions is encountered at the lower and upper limits of the PBL: (i) from water-stressed to well-fed vegetation, and (ii) from small to large humidity and temperature jumps at the PBL top inversion, due to the Saharan air layer overlying the monsoonal flow. As a result, buoyant convection at the surface and entrainment at the PBL top play very different roles according to the considered scalar. We show that, when the boundary-layer height reaches the shear level between the monsoonal and Harmattan flows, the temperature source and humidity sink at the boundary-layer top are sufficient to allow the entrainment to affect the entire boundary layer down to the surface. This situation occurs mainly during the drying and moistening periods of the monsoon cycle and affects the humidity statistics in particular. In this case, the humidity turbulent characteristics at the surface are no longer driven solely by buoyant convection, but also by entrainment at the boundary-layer top. Consequently, the Monin–Obukhov similarity theory appears to fail for the parameterisation of humidity-related moments.     

Experimental study of the coastal thermocline height variations caused by an impulsively applied wind of limited along-shore extent

On the large rotating platform of Grenoble's University, a channel (8×2×0.6 m) has been built, equipped with a wind entrainment simulation effects mechanism. With a local wind, acting over a two-layered ocean, upwelling or downwelling patterns are induced, which are Kelvin-type height variations of the interface; propagating so that, in the northern hemisphere, they leave the coastline to the right of their direction of propagation, and having a profile exponentially decreasing from the coastline towards the open sea. The agreement between these observations and the recently proposed model of Crepon and Richez (1982) is very good at some distance from the excitation zone.However, this model, for its application, is limited to the situation in which the Ekman layer is of the same order of magnitude as the upper layer. Otherwise the oceanographic observations, as well as our observations, show a cross-shore current in the intermediate layer. Near the boundaries of the excitation zone (i.e., the wind zone), such a current is responsible for vortices which cause local upwelling. The model does not account for such local upwelling which is superimposed on the Kelvin-type height variation of the thermocline. These vortices may be explained by consideration of variations of relative vorticity. The experiments also show that a wind perpendicular to the coast may also induce upwelling or downwelling.     

The identification of an active fault by a multidisciplinary study at the archaeological site of Sagalassos (SW Turkey)

The archaeological site of Sagalassos (SW Turkey) is located in a region characterized by the absence of any significant recent seismic activity, contrary to adjacent regions. However, the assessment of earthquake-related damage at the site suggests that the earthquakes that have been demonstrated to have struck this Pisidian city in ca. AD 500 and in the middle or second half of the 7th century AD are characterized by an MSK intensity of at least VIII and occurred on a fault very close to the city. Different investigation techniques (archaeoseismology, remote sensing and geomorphology, surface geology and structural data, 2D resistivity imaging and palaeoseismological trenching) have been applied at the archaeological site and its direct surroundings in search for the causative fault of these earthquakes. This multidisciplinary approach shows that each of the different approaches independently provides only partial, non-conclusive information with respect to the fault identification. Integration is imperative to give a conclusive answer in the search for the causative fault. This study has, indeed, revealed the existence of a to date unknown active normal fault system passing underneath ancient Sagalassos, i.e. the Sagalassos fault. A historical coseismic surface rupture event on this fault could be identified. This event possibly corresponds to the devastating Sagalassos earthquakes of ca. AD 500 and the middle or second half of the 7th century AD. Finally, this study demonstrates that in the particular geodynamic setting of SW Turkey archaeological sites with extensive earthquake-related damage form an important tool in any attempt to asses the seismic hazard.     

Characterization and correlation of Upper Jurassic (Oxfordian) bentonite deposits in the Paris Basin and the Subalpine Basin, France

Abstract Explosive volcanic activity is recorded in the Upper Jurassic of the Paris Basin and the Subalpine Basin of France by the identification of five bentonite horizons. These layers occur in Lower Oxfordian (cordatum ammonite zone) to Middle Oxfordian (plicatilis zone) clays and silty clays deposited in outer platform environments. In the Paris Basin, a thick bentonite (10–15 cm), identified in boreholes and in outcrop, is dominated by dioctahedral smectite (95%) with trace amounts of kaolinite, illite and chlorite. In contrast, five bentonites identified in the Subalpine Basin, where burial diagenesis and fluid circulation were more important, are composed of a mixture of kaolinite and regular or random illite/smectite mixed-layer clays in variable proportions, indicating a K-bentonite. In the Subalpine Basin, a 2–15 cm thick bentonite underlain by a layer affected by sulphate–carbonate mineralization can be correlated over 2000 km². Euhedral zircon, apatite and biotite crystals have been identified in all the bentonites. The geochemical composition of the bentonites in both basins is characterized by high concentrations of Hf, Nb, Pb, Ta, Th, Ti, U, Y, Zr and low concentrations of Cr, Cs and Rb. Biostratigraphical and geochemical data suggest that the thick bentonite in the Paris Basin correlates with the thickest bentonite in the Subalpine Basin, located 400 km to the south. These horizons indicate that significant explosive volcanic events occurred during the Middle Oxfordian and provide potential long-distance isochronous marker beds. Immobile element discrimination diagrams and rare-earth element characteristics indicate that the original ash compositions of the thickest bentonites correspond to a trachyandesitic source from a within-plate alkaline series that was probably related to North Atlantic rifting.