Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

The granulometrical characteristics of a slowly-moving dust cloud

A torn-up road offered the opportunity to sample a dust cloud continuously at different heights during a time interval of 51 hours. In particular the granulometrical characteristics of the dust caught were investigated. It appears that if the air layer in the vicinity of a dust cloud is not too turbulent, the cloud will be clearly granulometrically stratified. The coarse material moves chiefly at the bottom of the cloud, whereas the fine material will occur both at the bottom and at the top. The experiment also shows that the higher the dust in the cloud, the worse it is sorted. Above a critical height, however, the degree of sorting increases again. The variation of the mean dust diameter d₅₀, as a function of the height z, can be expressed in a simple semi-logarithmic equation. The variation of the dust quantity G, as a function of the height z, can also be expressed in a semi-logarithmic form but the correlation is higher when a power equation is used. The ratio of fine silt to coarse silt seems to vary parabolically with height. One can only speak of an optimal transport height in the case of particles > 16 μm. For finer particles, the turbulence of a normal air stream is usually high enough to carry the particles anywhere in the dust cloud, so that one can no longer speak of an optimal transport height. The granulometrical border between aeolian transport in saltation and aeolian transport in suspension lies, according to the results of the experiment, at a diameter of about 63 μm.     

Simulation of DNAPL infiltration and spreading behaviour in the saturated zone at varying flow velocities and alternating subsurface geometries

The influence of varying groundwater flow velocities on DNAPL infiltration and spreading behaviour was investigated by multiphase modelling using TMVOC and PetraSim. The multiphase models were calibrated by results of previously conducted laboratory experiments for the complete spatio-temporal range of the experiments. The small scale 2D scenario modelling was applied to qualify and quantify changes in position, architecture, geometry and dissolution of a TCE body in a fully saturated homogeneous sandy medium. The applied flow velocities ranging from 0.05 up to 40.00 m/day exhibited that the DNAPL TCE is affected even at the lowest flow velocity in its position, its size and its architecture. Additionally, several impermeable lenses with simple geometry were assumed in the model, to investigate the influence of stratified subsoil. In the experimental set-ups, the DNAPL body reacts more sensitive to the applied groundwater flow velocities than to the geometrical set-up of the scenarios. A possible consequence can be the transportation and displacement of a DNAPL pool due to natural or anthropogenic induced high groundwater flow velocities, as by Pump and Treat facilities, complicating site investigation process and planning of remediation activities.     

Holocene environmental dynamics of south-eastern Brazil recorded in laminated sediments of Lago Aleixo

Environmental changes of the last 9,300 years were reconstructed by geochemical and pollen analyses of a 14-m-long, laminated sediment core from Lago Aleixo, south-eastern Brazil. Fossil pollen assemblages indicate open savannah vegetation (campo cerrado) and gallery forests until approximately 6,900 cal. BP. During that time, siderite laminae were deposited under anoxic conditions at the lake bottom. Then, increased rainfall and a shorter annual dry period allowed gallery forests and semi-deciduous forests to expand, leading to more closed cerrado vegetation. High-intensity rainfall events during this period are recorded as peaks in K and Ti concentrations. The sediment facies during this period consists of alternating layers of diatoms and minerogenic matter. C/N ratios imply that algae and perhaps soils, too, were the main contributors to sediment organic matter. Biogenic silica and δ¹³C_org variations indicate increasing primary productivity, which was related to higher nutrient flux from intensified leaching of soils, as shown by rising K/Al ratios. Around 800 cal. BP, a closed, semi-deciduous forest developed under present-day climate conditions. Slope stabilization diminished erosion processes in the catchment and caused reduced input of minerogenic matter into the basin. Human impact is evident in the topmost homogeneous sediments, as removal of the stabilizing forest cover amplified soil erosion. The continuous trend to more humid conditions during the Holocene probably reflects increased influence of the Amazon Basin as a moisture source. We conclude that the Lago Aleixo sediment archive was a sensitive recorder of environmental dynamics in tropical South America, which were mainly controlled by changes in precipitation patterns.     

DUST DEPOSITION AS A FLOW VISUALIZATION TECHNIQUE

Various flow visualization techniques are briefly reviewed, most significantly those using flow streamers and tracers. Special consideration is then given to the dust deposition techniques method that is seldom used but is of particular interest and utility to the physical geographer concerned with fluid flow phenomena. Several examples are provided, using Belgian loess as a tracer, and the advantages and disadvantages of the system are evaluated. The method may also be used in the field. [Key words: geomorphology, fluid dynamics, flow visualization, dust deposition.]     

Subfossil Chironomidae from Lake Tanganyika, East Africa. 2. Chironominae (Chironomini and Tanytarsini)

Analysis of subfossil remains of larval Chironomidae in 38 surface-sediment samples from between 53 and 189 meter depth in Lake Tanganyika (East Africa) yielded 77 morphotypes, among which 7 Tanypodinae, 19 Orthocladiinae, and 51 Chironominae. Character-state differences between these morphotypes resemble differences at the species level in the better-known Holarctic fauna, hence we consider most of our Lake Tanganyika morphotypes equivalent to morphological species. Individual morphotypes were identified to species, genus, or tribe level depending on current alpha-taxonomic knowledge on the larvae of the group concerned, and the taxonomic resolution of preserved diagnostic features. This paper presents taxon diagnoses and an illustrated key to the Chironominae (Chironomini and Tanytarsini) in this collection. As the living chironomid fauna of Lake Tanganyika has never been comprehensively studied, we also briefly discuss faunistic aspects, and the ecology of the recovered species and genera in relation to benthic habitat diversity in Lake Tanganyika.     

Quasi-isotropic approximation of ray theory for anisotropic media

Wave propagation in weakly anisotropic inhomogeneous media is studied by the quasi-isotropic approximation of ray theory. The approach is based on the ray-tracing and dynamic ray-tracing differential equations for an isotropic background medium. In addition, it requires the integration of a system of two complex coupled differential equations along the isotropic ray.
The interference of the qS waves is described by traveltime and polarization corrections of interacting isotropic S waves. For qP waves the approach leads to a correction of the traveltime of the P wave in the isotropic background medium.
Seismograms and particle-motion diagrams obtained from numerical computations are presented for models with different strengths of anisotropy.
The equivalence of the quasi-isotropic approximation and the quasi-shear-wave coupling theory is demonstrated. The quasi-isotropic approximation allows for a consideration of the limit from weak anisotropy to isotropy, especially in the case of qS waves, where the usual ray theory for anisotropic media fails.     

Dust emission by off-road driving: Experiments on 17 arid soil types, Nevada, USA

Field experiments were conducted in Nellis Dunes Recreational Area (Clark County, Nevada, USA) to investigate emission of dust produced by off-road driving. Experiments were carried out with three types of vehicles: 4-wheelers (quads), dirt bikes (motorcycles) and dune buggies, on 17 soil types characteristic for a desert environment. Tests were done at various driving speeds, and emissions were measured for a large number of grain size fractions. This paper reports the results for two size fractions of emissions: PM10 (particles < 10 μm) and PM60 (particles < 60 μm). The latter was considered in this study to be sufficiently representative of the total suspendable fraction (TSP). Off-road driving was found to be a significant source of dust. However, the amounts varied greatly with the type of soil and the characteristics of the top layer. Models predicting emission of dust by off-road driving should thus consider a number of soil parameters and not just one key parameter. Vehicle type and driving speed are additional parameters that affect emission. In general, 4-wheelers produce more dust than dune buggies, and dune buggies, more than dirt bikes. Higher speeds also result in higher emissions. Dust emitted by off-road driving is less coarse than the parent sediment on the road surface. Off-road driving thus results in a progressive coarsening of the top layer. Exceptions to this are silty surfaces with no, or almost no, vegetation. For such surfaces no substantial differences were observed between the grain size distribution of road dust and emitted dust. Typical emission values for off-road driving on dry desert soils are: for sandy areas, 30–40 g km^− 1 (PM10) and 150–250 g km^− 1 (TSP); for silty areas, 100–200 g km^− 1 (PM10) and 600–2000 g km^− 1 (TSP); for drainages, 30–40 g km^− 1 (PM10) and 100–400 g km^− 1 (TSP); and for mixed terrain, 60–100 g km^− 1 (PM10) and 300–800 g km^− 1 (TSP). These values are for the types of vehicles tested in this study and do not refer to cars or trucks, which produce significantly more dust.     

Resistance of Lophelia pertusa to coverage by sediment and petroleum drill cuttings

In laboratory experiments, the cold-water coral Lophelia pertusa was exposed to settling particles. The effects of reef sediment, petroleum drill cuttings and a mix of both, on the development of anoxia at the coral surface were studied using O₂, pH and H₂S microsensors and by assessing coral polyp mortality. Due to the branching morphology of L. pertusa and the release of coral mucus, accumulation rates of settling material on coral branches were low. Microsensors detected H₂S production in only a few samples, and sulfate reduction rates of natural reef sediment slurries were low (<0.3 nmol S cm⁻³ d⁻¹). While the exposure to sediment clearly reduced the coral’s accessibility to oxygen, L. pertusa tolerated both partial low-oxygen and anoxic conditions without any visible detrimental short-term effect, such as tissue damage or death. However, complete burial of coral branches for >24 h in reef sediment resulted in suffocation.