贵州西北部基性侵入岩锆石U-Pb年代学、岩石地球化学特征 及其与铅锌成矿关系初探

贵州西北部发育多处基性侵入岩,总体规模较小(约0.25 Km2),多沿深大断裂侵位,出露于铅锌矿点外围,本文对猫猫厂、凉山两处矿点附近的儿马冲和白岩庆两地小型基性侵入岩进行了重点研究。侵入岩主要岩性为细粒辉长岩,造岩矿物主要为拉长石、普通辉石。SiO2范围为49.60-51.09 wt%,MgO从3.88-4.27 wt %,TiO2为3.69-3.85 wt %。LA-ICP-MS锆石U-Pb定年结果为268.3±7.4 Ma,显示岩浆侵位于二叠纪。基性侵入岩的微量元素蛛网图呈OIB型特征,富集大离子亲石元素（LILE）、轻稀土元素（LREE）,亏损重稀土元素（HFEE）,相对亏损高场强元素（Nb,Ta）,有Sr、Y亏损,Pb富集。(87Sr/86Sr)i范围0.706749～0.707069,(143Nd/144Nd)i范围0.512313～0.512363,εNd(t)范围0.2～1.2;源区熔融深度处于石榴石橄榄岩相深度,可能经历了1-3 %的部分熔融,处于亏损石榴石二辉橄榄岩相向原始石榴石二辉橄榄岩相的过渡区。成岩过程中发生了单斜辉石、斜长石等矿物分离结晶,受到了有限的地壳混染作用,未经历明显的AFC过程。地壳物质在地幔源区中的加入可能是造成地幔富集的主要原因。侵入岩与成矿作用之间的关系,主要通过两方面所表现。一方面是二者间构造活动上的耦合性。另一方面是基性岩在成矿过程中可能发挥了重要的化学屏障层作用。     

多尺度细节增强的遥感影像超分辨率重建

鉴于现有超分辨率重建方法难以突显重建影像细节信息的问题,提出多尺度细节增强的遥感影像超分辨率重建模型框架。首先,通过最小二乘滤波方法将序列影像分解成包含大尺度边缘的平滑信息和包含中小型尺度的细节信息;其次,利用插值方法得到相应的高分辨率细节信息和平滑信息,构造纹理细节增强函数,提升中小型细节的增强幅度;最终,融合细节信息和平滑信息,得到初始的超分辨率重建结果,并利用局部优化模型进一步改善重建影像质量。选取同时相和多时相遥感影像作为试验数据。试验结果表明,本文重建结果与插值方法、TV方法和MAP方法相比,在客观评价指标上均有显著提高,明显改善了重建影像的纹理细节。论文提出的多尺度细节增强的超分辨率重建方法,可以使重建影像提供更多高频细节信息,具有较好鲁棒性和普适性。     

起伏地形条件下的磁异常二维聚焦反演及应用

地形对磁异常的反演和解释有很大的影响,特别是磁异常体贴近地表分布时更是如此,为了降低这种影响,笔者推导出了基于有限延深的二度厚板状体的带地形的磁异常正演公式,并提出了一种基于起伏地形的地下网格模型剖分的新方法。同时,聚焦反演对物性体有很强的聚焦效果,如果能够预先判断磁异常主要由地下浅层的强磁性体所引起,则可以考虑采用聚焦反演的方法得到磁性体的位置,显然这种方法非常适合铁矿体的反演。笔者将带地形的二维磁异常正演与聚焦反演结合起来,进行了相应的模型试验,并与水平地形下的聚焦反演及起伏地形下的光滑反演进行对比,验证了这种结合的有效性。最后,将该方法应用于新疆特克斯的磁异常剖面,对该剖面的磁性体分布做出了合理的解释。     

滇东北毛坪铅锌矿床的成矿时代:闪锌矿Rb-Sr定年

毛坪铅锌矿床是滇东北地区代表性矿床之一,目前尚缺乏精确的成矿年代学数据。该文对选自块状铅锌矿石的4件闪锌矿单矿物样品进行了Rb-Sr同位素定年,获得等时线年龄为321.7±5.8 Ma(MSWD=1.5),表明毛坪铅锌矿床的主成矿作用发生于石炭纪。此外,闪锌矿~(87)Sr/~(86)Sr初始值为0.712166±0.000017,低于大陆地壳~(87)Sr/~(86)Sr平均值(0.719)且高于地幔Sr初始值(0.707),暗示成矿物质主要来源于大陆地壳并混有少量地幔物质。综合前人研究成果,作者认为毛坪铅锌矿属后生矿床,与晚二叠世峨眉山大火成岩省玄武岩浆活动无成因联系,类似于典型的MVT矿床,且滇东北地区可能发育多期铅锌矿化作用。     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

南海北部潮汕坳陷侏罗系沉积特征及对储层的控制作用研究

南海北部潮汕坳陷侏罗系具有很大的油气勘探潜力,沉积特征对其储层的发育具有明显的控制作用。通过对研究区最新地震资料精细解释,可以划分出4个典型地震反射界面和3个地震反射层,根据层序界面圈出侏罗系分布特征和残留厚度;通过地震相-沉积相转换对比分析研究,识别出侏罗纪地层不同时期的沉积相类型及其分布特征,重塑了潮汕坳陷侏罗系沉积演化史。该区主要发育5类沉积相、8种沉积亚相,其中滨岸三角洲前缘亚相和深水扇中亚相分别控制了碎屑流砂岩优质储层的发育;此外,浊流砂岩储层主要受控于物源供给的影响,距离三角洲砂体朵叶越近,滑塌浊积体数量越多,面积也越大。总体上,滨岸三角洲前缘亚相、深水扇中亚相和滑塌浊积体是研究区良好的储集相带,该类储集体由于埋藏较深加之被泥岩覆盖,对油气聚集较为有利。